Hello again! As I said before, everything works fine now, but still I have a question: When I insert the PC-Card, only the drivers for normal television are loaded, not for DVB-T. So here is my question: how do I load the module saa7134_dvb automatically when I insert the card? The problem is that I want to enable other users on this labtop who have access to the TV-card to watch television... Any information would be appreciated - I'd like to use this laptop at home :-D Thanks Johannes ---------- Forwarded message ---------- Date: Fri, 1 Jul 2005 08:54:09 +0200 (CEST) From: Johannes Adams <johannes.adams@xxxxxxx> To: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> Cc: linux-dvb@xxxxxxxxxxx Subject: Re: [linux-dvb] Firmware upload failed > Hi, Johannes > Short reply: You need an update from the video4linux CVS at linuxtv.org. Hi Hartmut! Thanks a lot for the short reply (I could have guessed, though :-)). Now everything works - thanks again! Johannes _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
