Have pretty much got my new gentoo box up and running, however, am having trouble with the dvb. using kernel 2.6.11 from recent gentoo sources (on amd64), and using udev Firstly, the device nodes were not being created, (first noticed by fact that kaffeine did not bring up the dvb tab). there is no /dev/dvb/ have checked google, and found reference to udev rules and a dvb.sh script. These rules, and the script are both already in place. checked that modules were being loaded, and got Module Size Used by fglrx 262144 7 budget 8896 0 l64781 7300 1 budget ves1820 5892 1 budget budget_core 8068 1 budget saa7146 16000 2 budget,budget_core ttpci_eeprom 2432 1 budget_core stv0299 10180 1 budget tda8083 5572 1 budget ves1x93 6404 1 budget dvb_core 79100 2 budget,budget_core tda1004x 13572 0 Now, I think the issue here is that the tda8083 module is being used, when my hardware should be using the tda1004x (I know, because this is the same card as I used in my old 32bit athlon system - beside which tda8083 is dvb-s, and I have a dvb-t (winTV nova-T from easter 2004)). I never selected to compile the 8083 module - it seems to get automatically set when i run make. suggestions?
