This might be a question for another forum. I have tried vlc on IRC without success. So anyway; I have now finished rewriting the basics ca_set_pmt(), and the Twinhan card finally replies (see dmesg below). But the computer is in a serverroom without a console, so I need to stream the output with vlc (0.8.1 Janus) to watch the result. I wonder if I do this correctly. Method one (this already works great on an unscrambled channel); I run vlc in dvb mode, like this... # vlc -vvv --color --ttl 12 --ts-es-id-pid dvb: --dvb-adapter=0 --dvb-frequency=12303000 --dvb-srate=27800000 --programs=1508 --dvb-budget-mode --sout ... ..and while running with a lot of errors (assuming cause of scrambled data) like this.. ts demuxer warning: invalid header [0xf8:87:5d:26] (pid: 514) ..I run ca_zap like this.. # ./ca_zap -a 0 -c TV2.conf -n "TV2 Norge" -t sat ...which reports as the log below, but the vlc invalid header errors continues as if nothing happens... I would assume the data starts to get descrambled correctly, and makes vlc decoder sync properly I might be wrong..?! TV2.conf contains one line: TV2 Norge:12303:v:0:27800:514:668:1508 Method two (can't make this work); # vlc -vvv --color --ttl 12 stream:/dev/dvb/adapter0/dvr0 --sout ... Trying to read dvr0 as a stream, using szap with -r and -p...but it just hangs like this; [00000222] main input debug: `stream:/dev/dvb/adapter0/dvr0' sucessfully opened [00000239] ts demuxer debug: pid[514] unknown [00000222] main input debug: control type=1 [00000239] ts demuxer debug: pid[668] unknown Any tips would be appreciated! dmesg ----------------------------------------------- dst_ca_open:Device opened [ffff81000f066bc0] dst_ca_ioctl: Sending message ca_send_message ca_send_message:Command=[0x9f8032] Command = SEND_CA_PMT asn_1_decode: Length field=[12] asn_1_decode: Length=[12] ca_set_pmt: CA Message length=[12] ca_set_pmt: RAW CA Message with tag and length: Offset=[ 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 ] String=[ 9f 80 32 12 03 05 e4 01 10 06 01 09 04 0b 00 e5 05 02 e2 02 f0 05 ] ca_set_pmt: ASN.1: Offset=[ 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 ] String=[ 03 05 e4 01 10 06 01 09 04 0b 00 e5 05 02 e2 02 f0 05 ] ca_set_pmt: pmt_list_management [8 bits]: copy_string: Copying [ 03] ca_set_pmt: program_number [16 bits]: copy_string: Copying [ 05 e4] ca_set_pmt: reserved [2 bits], version number [5 bits], current_next_indicator [1 bit]: copy_string: Copying [ 01] ca_set_pmt: reserverd [4 bits], program_info_length [12 bits] copy_string: Copying [ 10 06] ca_set_pmt: !!! Probably an ASIC bug, incrementing program_info_length by 1 program_info_length: 6 ca_set_pmt: Summary; length: 07(dst_tag) + 06 : Offset=[ 00 01 02 03 04 05 06 07 08 09 0a 0b 0c ] String=[ 19 40 03 00 03 12 00 03 05 e4 11 00 07 ] ca_set_pmt: ca_pmt_cmd_id [8 bits] copy_string: Copying [ 01] ca_set_pmt: CA_descriptor() copy_string: Copying [ 09 04 0b 00 e5 05] ca_set_pmt: stream type [8 bits]: copy_string: Copying [ 02] ca_set_pmt: reserved [3 bits], elementary_pid [13 bits]: copy_string: Copying [ e2 02] ca_set_pmt: program_number [16 bits]: copy_string: Copying [ f0 05] ca_set_pmt: Final block; length: 07(dst_tag) + 13 + (1)checksum: Offset=[ 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 ] String=[ 19 40 03 00 03 12 00 03 05 e4 11 00 07 01 09 04 0b 00 05 05 02 02 02 f0 05 6d ] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_put_ci: Put Command dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] write_dst writing [ 19 40 03 00 03 12 00 03 05 e4 11 00 07 01 09 04 0b 00 05 0502 02 02 f0 05 6d ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst reply is 0xff write_to_8820: DST-CI Command succes. ca_send_message: -->CA_PMT Success ! dst_ca_release:Device closed. Oivind On 6/24/05, Manu Abraham <manu@xxxxxxxxxxx> wrote: > Oivind wrote: > >>>>From dmesg with some additional debug info > >>>------------------------------------------ > >>>dst_ca_open:Device opened [ffff81003d1687c0] > >>>dst_ca_ioctl: Sending message > >>>ca_send_message > >>>ca_send_message:Command=[0x9f8032] > >>>Command = SEND_CA_PMT > >>>asn_1_decode: Length field=[12] > >>>asn_1_decode: Length=[12] > >>>ca_set_pmt: CA Message length=[18] > >>>ca_set_pmt: ASN.1 String=[ 03 05 e4 01 10 06 01 09 04 0b 00 e5 05 02 > >>>e2 02 f0 05 ] > >>>copy_string: Copying [ 03 05 e4 01 10 06] > >>>ca_set_pmt: Probably an ASIC bug !!! > >>> String=[ 19 40 03 00 03 12 00 03 05 e4 01 00 06 00 00 00 00 00 00 ] > >>>ca_set_pmt: Program info length=[06] > >>>copy_string: Copying [ 01 09 04 0b 00 e5 05] > >>>copy_string: Copying [ 02 e2 02 f0 05] > >>> String=[ 02 e2 02 00 05 ] > >>>ca_set_pmt: buf_offset-2 [p_ca_message->msg[buf_offset-2]]=14 [f0] > >>>ca_set_pmt: buf_offset-1 [p_ca_message->msg[buf_offset-1]]=15 [05] > >>>ca_set_pmt: ES Info length bytes = [05 00] (offsets 15,16) > >>>ca_set_pmt: ES info length=[05] > >>ES info length eventhough correct, uses the wrong words, ie offset is > >>wrong .. ? ie it should have been using 0xf0 and 0x05, offsets 15 and 16.. > >> > >>The offset is important since for some cards, the reserved 4 bits needs > >>to be set to 0 for some cards.. > >> > >>>ca_set_pmt: buf_offset+1 [p_ca_message->msg[buf_offset+1]]=17 [00] > >>>ca_set_pmt: buf_offset+2 [p_ca_message->msg[buf_offset+2]]=18 [00] > >>>ca_set_pmt: buf_offset+2 [p_ca_message->msg[buf_offset+3]]=19 [00] > >>> String=[ 19 40 03 00 03 12 00, 03 05 e4 01 00 07 01 09 04 0b 00 e5 05 > >>>02 e2 02 00 05 ad ] > >>The string looks somewhat okay, but program_info_length is just after > >>0x03 just after the comma that i placed in your log to show it out .. > >> > >>In this case the program_info_length becomes 0x05 0xe4 which is wrong .. > > > > Ok 0x05 0xe4 is wrong, but what is right? > > program_info_length, from your dvbsnoop output i understand is 0xf0 and > 0x06 which makes 6 > > and comparing it with the output from libdvbsi > > parse_pmt: ----------->parse PMT section, PMT PID=[263], bytes=[134] > parse_pmt_header: Table ID=[2], Section Length=[131], Program > Number=[1508], Section Number=[0], PCR PID=[514], Program info > length=[6] > parse_pmt: Program info length=[6] > INFO:: Parsing descriptor: parse_ca_descriptor, Tag=[09], Length=[4] > parse_ca_descriptor: Tag=[09], Length=[04], CA System=[b00], CA PID=[505] > parse_ca_descriptor: CA Private Data=[ ] > parse_ca_descriptor: Pos=[18] > parse_pmt: Count=[18], Position=[18], Program descriptor count=[6] > > parse_streams: Elements=[ 02 e2 02 f0 05 02 03 1a 48 5f] > parse_streams: Stream=[0], Stream Type=[2], Elementary > PID=[514], ES info length=[5] > > > > > > > > > That seems to be right .. > > Let me take a look at what could be wrong again .. > > > > > > >>And the entire message seems to be shifted to the left by 1 word, due > >>to a wrong offset > >> > >>Get the correct offset, other than that everything looks moreor less okay .. > > > > So you mean the message should look like this with something different as xx? > > String=[ xx 19 40 03 00 03 12 00, 03 05 e4 01 00 07 01 09 04 0b 00 e5 > > 05 02 e2 02 00 05 ] > > > > No, what i meant is the message looks shifted afte 19 40 03 00 03 12 00 03 > > > > > Can you please provide me with a log of your system? As far as i > > remember, you're using the same hardware. > > > > Ok, > > A log of what dst and dst_ca does right from module load, szap, ca_zap .. > > Jun 24 22:36:25 deploy kernel: Linux video capture interface: v1.00 > Jun 24 22:36:25 deploy kernel: bttv: driver version 0.9.15 loaded > Jun 24 22:36:25 deploy kernel: bttv: using 8 buffers with 2080k (520 > pages) each for capture > Jun 24 22:36:25 deploy kernel: bttv: Bt8xx card found (0). > Jun 24 22:36:25 deploy kernel: ACPI: PCI interrupt 0000:02:0c.0[A] -> > GSI 20 (level, low) -> IRQ 20 > Jun 24 22:36:25 deploy kernel: bttv0: Bt878 (rev 17) at 0000:02:0c.0, > irq: 20, latency: 32, mmio: 0xefefe000 > Jun 24 22:36:25 deploy kernel: bttv0: detected: Twinhan VisionPlus DVB-T > [card=113], PCI subsystem ID is 1822:0001 > Jun 24 22:36:25 deploy kernel: bttv0: using: Twinhan DST + clones > [card=113,insmod option] > Jun 24 22:36:25 deploy kernel: bttv0: using tuner=4 > Jun 24 22:36:25 deploy kernel: bttv0: add subdevice "dvb0" > Jun 24 22:36:25 deploy kernel: bt878: AUDIO driver version 0.0.0 loaded > Jun 24 22:36:25 deploy kernel: bt878: Bt878 AUDIO function found (0). > Jun 24 22:36:25 deploy kernel: ACPI: PCI interrupt 0000:02:0c.1[A] -> > GSI 20 (level, low) -> IRQ 20 > Jun 24 22:36:25 deploy kernel: bt878(0): Bt878 (rev 17) at 02:0c.1, irq: > 20, latency: 32, memory: 0xefeff000 > Jun 24 22:36:25 deploy kernel: DVB: registering new adapter (bttv0). > Jun 24 22:36:25 deploy kernel: DVB: register adapter0/demux0 @ minor: 4 > (0x04) > Jun 24 22:36:25 deploy kernel: DVB: register adapter0/dvr0 @ minor: 5 (0x05) > Jun 24 22:36:25 deploy kernel: DVB: register adapter0/net0 @ minor: 7 (0x07) > Jun 24 22:36:25 deploy kernel: rdc_8820_reset: Resetting DST > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[0004], enbb=[0004], > outhigh=[0000] > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[0004], enbb=[0004], > outhigh=[0004] > Jun 24 22:36:25 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:36:25 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:36:25 deploy kernel: write_dst writing [ 00 06 00 00 00 00 00 fa ] > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:36:25 deploy kernel: read_dst reply is 0xff > Jun 24 22:36:25 deploy kernel: dst_wait_dst_ready: dst wait ready after 1 > Jun 24 22:36:25 deploy kernel: read_dst reply is 0x0 > Jun 24 22:36:25 deploy kernel: 0x44 0x53 0x54 0x4d 0x43 0x49 0x3c > Jun 24 22:36:25 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:36:25 deploy kernel: dst_get_device_id: Recognise [DSTMCI] > Jun 24 22:36:25 deploy kernel: DST type : satellite > Jun 24 22:36:25 deploy kernel: DST type flags : 0x1 newtuner 0x10 > firmware version = 2 > Jun 24 22:36:25 deploy kernel: dst_ca_attach:registering DST-CA device > Jun 24 22:36:25 deploy kernel: DVB: register adapter0/ca0 @ minor: 6 (0x06) > Jun 24 22:36:25 deploy kernel: DVB: registering frontend 0 (DST DVB-S)... > Jun 24 22:36:25 deploy kernel: DVB: register adapter0/frontend0 @ minor: > 3 (0x03) > Jun 24 22:36:26 deploy udev[4710]: creating device node '/udev/dvb0.demux0' > Jun 24 22:36:26 deploy udev[4717]: creating device node '/udev/dvb0.dvr0' > Jun 24 22:36:26 deploy udev[4724]: creating device node '/udev/dvb0.net0' > Jun 24 22:36:27 deploy udev[4731]: creating device node '/udev/dvb0.ca0' > Jun 24 22:36:27 deploy udev[4738]: creating device node > '/udev/dvb0.frontend0' > Jun 24 22:36:35 deploy udev[4500]: creating device node '/udev/dvb' > Jun 24 22:37:10 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:10 deploy kernel: write_dst writing [ 00 09 ff b6 01 00 00 41 ] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:10 deploy kernel: dst_wait_dst_ready: dst wait ready after 5 > Jun 24 22:37:10 deploy kernel: read_dst reply is 0x0 > Jun 24 22:37:10 deploy kernel: 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 > Jun 24 22:37:10 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:10 deploy kernel: write_dst writing [ 00 09 ff b6 01 00 00 41 ] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:10 deploy kernel: dst_wait_dst_ready: dst wait ready after 5 > Jun 24 22:37:10 deploy kernel: read_dst reply is 0x0 > Jun 24 22:37:10 deploy kernel: 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 > Jun 24 22:37:10 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:10 deploy kernel: write_dst writing [ 00 08 04 e0 10 38 f3 d9 ] > Jun 24 22:37:10 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:10 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:11 deploy kernel: dst_wait_dst_ready: dst wait ready after 28 > Jun 24 22:37:11 deploy kernel: read_dst reply is 0x0 > Jun 24 22:37:11 deploy kernel: 0x8 0x4 0xe0 0x10 0x38 0xf3 0xd9 > Jun 24 22:37:11 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:11 deploy kernel: write_dst writing [ 00 09 ff 02 01 00 00 f5 ] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:11 deploy kernel: dst_wait_dst_ready: dst wait ready after 5 > Jun 24 22:37:11 deploy kernel: read_dst reply is 0x0 > Jun 24 22:37:11 deploy kernel: 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 > Jun 24 22:37:11 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:11 deploy kernel: write_dst writing [ 00 09 02 02 01 00 00 f2 ] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:11 deploy kernel: dst_wait_dst_ready: dst wait ready after 5 > Jun 24 22:37:11 deploy kernel: read_dst reply is 0x0 > Jun 24 22:37:11 deploy kernel: 0x9 0x2 0x2 0x1 0x0 0x0 0xf2 > Jun 24 22:37:11 deploy kernel: dst_set_freq: set Frequency 1396000 > Jun 24 22:37:11 deploy kernel: Set Frequency=[1396000] > Jun 24 22:37:11 deploy kernel: dst_set_polarization: > Polarization=[Horizontal] > Jun 24 22:37:11 deploy kernel: Set Symbolrate=[27500000] > Jun 24 22:37:11 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:11 deploy kernel: write_dst writing [ 09 00 05 74 01 00 6b > 6c 40 66 ] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:11 deploy kernel: dst_wait_dst_ready: dst wait ready after 2 > Jun 24 22:37:11 deploy kernel: read_dst reply is 0x9 > Jun 24 22:37:11 deploy kernel: 0x0 0x5 0x74 0x17 0x7b 0x0 0x3b 0x0 0xb1 > Jun 24 22:37:11 deploy kernel: dst_get_signal: Getting Signal strength > and other parameters !!!!!!!! > Jun 24 22:37:11 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:11 deploy kernel: write_dst writing [ 00 05 00 00 00 00 00 fb ] > Jun 24 22:37:11 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:11 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:11 deploy kernel: dst_wait_dst_ready: dst wait ready after 1 > Jun 24 22:37:11 deploy kernel: read_dst reply is 0x5 > Jun 24 22:37:11 deploy kernel: 0x74 0x17 0x7a 0x80 0x3a 0x0 0x3c > Jun 24 22:37:11 deploy kernel: dst_get_signal: Getting Signal strength > and other parameters !!!!!!!! > Jun 24 22:37:28 deploy kernel: dst_ca_open:Device opened [ecedb980] > Jun 24 22:37:28 deploy kernel: dst_ca_ioctl: Sending message > Jun 24 22:37:28 deploy kernel: ca_send_message > Jun 24 22:37:28 deploy kernel: ca_send_message:Command=[0x9f8032] > Jun 24 22:37:28 deploy kernel: Command = SEND_CA_PMT > Jun 24 22:37:28 deploy kernel: asn_1_decode: Length field=[19] > Jun 24 22:37:28 deploy kernel: asn_1_decode: Length=[19] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: CA Message length=[25] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: ASN.1 String=[ 03 01 33 11 > 10 08 01 09 06 06 04 05 4a ff f1 02 e0 cf f0 00 04 e1 33 f0 00 ] > Jun 24 22:37:28 deploy kernel: copy_string: Copying [ 03 01 33 11 10 08] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: Probably an ASIC bug !!! > Jun 24 22:37:28 deploy kernel: String=[ 20 40 03 00 03 19 00 03 01 33 > 11 00 08 00 00 00 00 00 00 ] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: Program info length=[08] > Jun 24 22:37:28 deploy kernel: copy_string: Copying [ 01 09 06 06 04 05 > 4a ff f1] > Jun 24 22:37:28 deploy kernel: copy_string: Copying [ 02 e0 cf f0 00] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: ES Info length bytes = [00 04] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: ES info length=[04] > Jun 24 22:37:28 deploy kernel: copy_string: Copying [ 04 e1 33 f0 00] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: ES Info length bytes = [00 00] > Jun 24 22:37:28 deploy kernel: ca_set_pmt: ES info length=[00] > Jun 24 22:37:28 deploy kernel: String=[ 20 40 03 00 03 19 00 03 01 33 > 11 00 09 01 09 06 06 04 05 4a ff f1 02 e0 cf 00 00 04 e1 33 00 00 0e ] > Jun 24 22:37:28 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:28 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:28 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:28 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:29 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:29 deploy kernel: dst_put_ci: Put Command > Jun 24 22:37:29 deploy kernel: dst_comm_init: Initializing DST.. > Jun 24 22:37:29 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0001], outhigh=[0000] > Jun 24 22:37:29 deploy kernel: rdc_reset_state: Resetting state machine > Jun 24 22:37:29 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0000] > Jun 24 22:37:29 deploy kernel: dst_gpio_outb: mask=[0002], enbb=[0002], > outhigh=[0002] > Jun 24 22:37:29 deploy kernel: write_dst writing [ 20 40 03 00 03 19 00 > 03 01 33 11 00 09 01 09 06 06 04 05 4a ff f1 02 e0 cf 00 00 04 e1 33 00 > 00 0e ] > Jun 24 22:37:29 deploy kernel: dst_gpio_outb: mask=[ffffffff], > enbb=[0000], outhigh=[0000] > Jun 24 22:37:29 deploy kernel: read_dst reply is 0xff > Jun 24 22:37:29 deploy kernel: write_to_8820: DST-CI Command succes. > Jun 24 22:37:29 deploy kernel: ca_send_message: -->CA_PMT Success ! > Jun 24 22:37:29 deploy kernel: dst_ca_release:Device closed. > > > My channels.conf is like this ... > > TVL:11996:h:0:27500:201:301:301 > TVL+2:11996:h:0:27500:202:302:302 > PRM:11996:h:0:27500:203:303:303 > PRM+2:11996:h:0:27500:204:304:304 > TMC:11996:h:0:27500:205:305:305 > TMC+1:11996:h:0:27500:206:306:306 > > > When running ca_zap after a szap, > > # ca_zap -a 0 -c ~/channels.conf -t sat -d 0 -s 0 -f 0 -n TMC2 > > > I get like this ... > > [root@deploy ca_zap]#./ca_zap -a 0 -c ~/channels.conf -t sat -d 0 -s 0 > -f 0 -n TMC2 > Using Adpater=[/dev/dvb/adapter0] > Frontend=[/dev/dvb/adapter0/frontend0] > Demux=[/dev/dvb/adapter0/demux0] > Slot=[/dev/dvb/adapter0/ca0] > Parsing /root/channels.conf > Satellite frontend > parse_sat_channel_list: Channel=[TMC2], Frequency=[11996], > Satellite=[0], Symbol Rate=[27500], Video=[207], Audio=[307], Service=[307] > Service ID=[307] > parse_pat: ----------------->parse PAT section > parse_pat: PAT => Section Length=[69], TS ID=[17667] > parse_si: PMT PID = [107] > parse_si: PAT: Close Demux /dev/dvb/adapter0/demux0 > parse_pmt: PMT Words=[ 02 b0 1f 01 33 c9 00 00 e0 cf f0 08 09 06 06 04 > 05 4a ff f1 02 e0 cf f0 00 04 e1 33 f0 00 ed 73 38 4a ] > > parse_pmt: ----------->parse PMT section, PMT PID=[107], bytes=[34] > parse_pmt_header: Table ID=[2], Section Length=[31], Program > Number=[307], Section Number=[0], PCR PID=[207], Program info length=[8] > parse_pmt: Program info length=[8] > INFO:: Parsing descriptor: parse_ca_descriptor, Tag=[09], Length=[6] > parse_ca_descriptor: Tag=[09], Length=[06], CA System=[604], CA PID=[54a] > parse_ca_descriptor: CA Private Data=[ ff f1 ] > parse_ca_descriptor: Pos=[20] > parse_pmt: Count=[20], Position=[20], Program descriptor count=[8] > > parse_streams: Elements=[ 02 e0 cf f0 00] > parse_streams: Stream=[0], Stream Type=[2], Elementary PID=[207], > ES info length=[0] > > parse_streams: Elements=[ 04 e1 33 f0 00] > parse_streams: Stream=[1], Stream Type=[4], Elementary PID=[307], > ES info length=[0] > > copy_en50221_pmt_object: Copying EN50221 Header > copy_en50221_pmt_object: Program Number=[307], Program info length=[8] > copy_en50221_pmt_object: Program level descriptor count=[1] > copy_en50221_pmt_object: CA descriptor=[09] found, @ [0xbfffe008], > descriptor length=[06] > copy_en50221_descriptor_object: Tag=[09], Length=[06], CA system > ID=[604], CA PID=[54a] > copy_en50221_descriptor_object: Private bytes=[2] [ ff f1 ] > copy_en50221_pmt_object: [0] CA descriptor copied > copy_en50221_stream_object: Stream Type=[2], Elementary PID=[207], ES > length=[0], Number of descriptors=[0] > copy_en50221_stream_object: Stream Type=[4], Elementary PID=[307], ES > length=[0], Number of descriptors=[0] > do_en50221_pmt_object: CA PMT List Management=[03] > set_pmt_command: Setting PMT Command > set_pmt_command: CA descriptor found @ PROGRAM Level, Setting CA PMT > command=[01] > do_en50221_pmt_object: Object length=[200], Total length=[25] > asn_1_encode: Length=[25] > asn_1_encode: length indicator=[19] > do_en50221_pmt_object: ASN.1 words=[1], Length Array=[ 25 ] > en50221_encode_header: CA PMT List Mgmt=[3], Program Number=[307], > Program info length=[8] > write_en50221_pmt_object: EN50221 header encoded > write_en50221_pmt_object: Program level descriptor @ [0x804e088], > count=[1], tag=[09], length=[06] > encode_ca_pmt_command: Encoding SCRAMBLING @ PROGRAM Level, Command=[01] > en50221_encode_descriptor: Tag=[09], length=[06], CA system id=[604], CA > PID=[54a] > en50221_encode_descriptor: Private Bytes=[2] [ ff f1 ] > en50221_encode_streams: Stream type=[02], ES PID=[cf], ES Info length=[00] > en50221_encode_streams: Stream type=[04], ES PID=[133], ES Info length=[00] > debug_message: CA MESSAGE=[ 9f 80 32 19 03 01 33 11 10 08 01 09 06 06 04 > 05 4a ff f1 02 e0 cf f0 00 04 e1 33 f0 00 ] > [root@deploy ca_zap]# exit > > Script done on Thu 23 Jun 2005 04:24:57 PM GST > > > > > >
