[linux-dvb] Nexus-2 Rev 2.3: No remote, no PCM sound

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I just received a new Nexus-S Rev 2.3 and installed it with 
kernel 2.6.12-rc5 and Firmware 261d.

Video works, I can record and replay recordings.
But I cannot get the remote to work and I have no PCM sound.
Both worked with Rev 2.2 and everything else is identical.

First the remote: I tried 
root@mm:~# av7110_loadkeys /etc/vdr/roc650.rc5 >/proc/av7110_ir
root@mm:~# evtest /dev/input/event2
Input driver version is 1.0.0
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "DVB on-card IR receiver"

roc650.rc5 did work with my old Nexus-s Rev 2.2. I also tried
hauppauge_grey.rc5, nothing either.

evtest does not react on anything. What could I try next?



The sound: I do have analog sound, just not SP/DIF. The
A/V receiver does recognize a PCM signal coming from the Nexus,
but is simply is silent. setup.conf says CurrentVolume = 255


ay 28 11:27:42 mm kernel: saa7146: found saa7146 @ mem de98ce00 (revision 1, irq 11) (0x13c2,0x000e).
May 28 11:27:42 mm kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
May 28 11:27:42 mm kernel: adapter has MAC addr = 00:d0:5c:24:e0:c6
May 28 11:27:42 mm kernel: dvb-ttpci: gpioirq unknown type=0 len=0
May 28 11:27:42 mm kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
May 28 11:27:42 mm kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
May 28 11:27:42 mm kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
May 28 11:27:42 mm kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
May 28 11:27:42 mm kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
May 28 11:27:42 mm kernel: dvb-ttpci: found av7110-0.


-- 
Wolfgang



[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux