Now my Nexus-s works: saa7146: found saa7146 @ mem e0a78000 (revision 1, irq 201) (0x13c2,0x000e). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). adapter has MAC addr = 00:d0:5c:24:07:92 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... dvb-ttpci: found av7110-0. I removed my Hauppauge Nova-CI and now the dvb-ttpci driver loads without any problems. So the problem was a conflict with the Nova-CI. Regards Rinse -----Oorspronkelijk bericht----- Van: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] Namens Rinse Kloek Verzonden: vrijdag 13 mei 2005 16:16 Aan: linux-dvb@xxxxxxxxxxx Onderwerp: RE: [linux-dvb] load_dram(): timeout at block 0 I have the same problem. I have an P4 3.0 Ghz (Supermicro board) with one Nova-S PCI and a Nexus-S PCI. The Nova-S works perfectly, byt the Nexus-S gives the same problem. What kind of firmware version do you use ? Regards Rinse -----Oorspronkelijk bericht----- Van: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] Namens rene.jahn@xxxxxxxx Verzonden: vrijdag 13 mei 2005 15:43 Aan: linux-dvb@xxxxxxxxxxx Onderwerp: [linux-dvb] load_dram(): timeout at block 0 I "use" two Hauppauge Nexus-s rev2.3. One card works, the second card not(with my new mainboard/cpu) Both cards work with my old mainboard/cpu. Both cards work with windows(Mainboard ASUS ? , P3/1G CPU). Old system: ASUS Mainboard(P3CL-S) and P3/933 CPU! New system: MSI K7N2 and Athlon 2000+ I use latest CVS drivers(14.05.2005), debian sarge, 2.6.11.7 vanilla and got the following error: dvb-ttpci: found av7110-0. saa7146: found saa7146 @ mem d3984000 (revision 1, irq 7) (0x13c2,0x000e). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). adapter has MAC addr = 00:d0:5c:24:b8:80 dvb-ttpci: load_dram(): timeout at block 0 dvb-ttpci: av7110_bootarm(): load_dram() failed I didn't mix kernel driver and cvs! -> I use the CVS driver! I don't think it's a problem with my tuner-card, because it works under windows. Does anybody know something about the problem? ---------------------------------------------------------------- _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
