> > Hi all > > again: some prob here > two rev 1.3 working in old system, after upgrading one works, one don't > (with this error) > Firmware is also 261d for both cards > > @rene: > is it the same machine you used for testing the card under windows (dual > boot?) > how big is/are the power supply(s)? (I know mine is to weak for the new > board, but don't if it's the reason for this err) No, it's not the same system :( Linux old/new: Power supply: 350W -> I used 235W before i changed the mainboard because I need more HDs. working windows: 250W -> > > did anyone try just to increase the timeout? Change source code or is there a property? > > greets > thorsten > > > > >Zitat von Rinse Kloek <rinse@xxxxxxxxx>: > > > > > I have the same problem. I have an P4 3.0 Ghz (Supermicro board) with > > > one Nova-S PCI and a Nexus-S PCI. The Nova-S works perfectly, byt the > > > Nexus-S gives the same problem. > > > > > > What kind of firmware version do you use ? > > > >Firmware: Version 261d (from CVS) > > > > > > > > Regards Rinse > > > > > > -----Oorspronkelijk bericht----- > > > Van: linux-dvb-bounces@xxxxxxxxxxx > > > [mailto:linux-dvb-bounces@xxxxxxxxxxx] Namens rene.jahn@xxxxxxxx > > > Verzonden: vrijdag 13 mei 2005 15:43 > > > Aan: linux-dvb@xxxxxxxxxxx > > > Onderwerp: [linux-dvb] load_dram(): timeout at block 0 > > > > > > I "use" two Hauppauge Nexus-s rev2.3. > > > > > > One card works, the second card not(with my new mainboard/cpu) Both > > > cards work with my old mainboard/cpu. > > > Both cards work with windows(Mainboard ASUS ? , P3/1G CPU). > > > > > > Old system: ASUS Mainboard(P3CL-S) and P3/933 CPU! > > > New system: MSI K7N2 and Athlon 2000+ > > > > > > I use latest CVS drivers(14.05.2005), debian sarge, 2.6.11.7 vanilla and > > > got the following error: > > > > > > dvb-ttpci: found av7110-0. > > > saa7146: found saa7146 @ mem d3984000 (revision 1, irq 7) > > > (0x13c2,0x000e). > > > DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S > > > rev2.3). > > > adapter has MAC addr = 00:d0:5c:24:b8:80 > > > dvb-ttpci: load_dram(): timeout at block 0 > > > dvb-ttpci: av7110_bootarm(): load_dram() failed > > > > > > I didn't mix kernel driver and cvs! -> I use the CVS driver! > > > > > > > > > I don't think it's a problem with my tuner-card, because it works under > > > windows. > > > > > > > > > Does anybody know something about the problem? > > > > > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ----------------------------------------------------------------
