Hi, I'm using kernel 2.6.11.8, which should have the patches you mention. I am still seeing the same kinds of problem. Even with the asic_delay patch posted earlier and asic_delay set to 10,30,40,50 and 100. When trying to scan, dmesg still tells me: Set Frequency = [522000000] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] write_dst writing 07 f7 10 00 08 00 00 ea dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst reply is 0x9 0xc1 0x11 0xbd 0x0 0x26 0x0 0x0 dst_get_tuna: checksum failure? Set Frequency = [522000000] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] write_dst writing 07 f7 10 00 08 00 80 6a write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x07) dst_error_recovery: Trying to return from previous errors... dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst reply is 0x9 0xc1 0x11 0xbd 0x0 0x26 0x0 0x0 dst_get_tuna: checksum failure? Am I correct in my assumptions that 2.6.11.8 contains the patches? /Henrik ------------------- > Mikko Hamalainen wrote: > > >Hello, > > > >For some reason my Twinhan DTV MiniCAB is recognized as terrestrial card > >by the latest CVS drivers. Are there some module parameters I should > >change in order to make it detect correctly as cable card? The card in > >question has model number VP-2010. > > > > > What does dst_get_device_id return, while loading the modules ? > > Manu. > > >Best regards, > >Mikko. > > > >_______________________________________________ > > > >linux-dvb@xxxxxxxxxxx > >http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > > > > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
