Rinse Kloek wrote: > I am trying to get the Nexus-S Rev 2.6 working on a linux 2.6.11-8 > kernel with the latest DVB-kernel drivers (CVS checkout). I still get > this error: > > ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 20 (level, low) -> IRQ 201 > saa7146: found saa7146 @ mem e0a78000 (revision 1, irq 201) > (0x13c2,0x000e). > DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S > rev2.3). > adapter has MAC addr = 00:d0:5c:24:07:92 > dvb-ttpci: load_dram(): timeout at block 0 > dvb-ttpci: av7110_bootarm(): load_dram() failed > > I read some forums that it has to do with the hardware/BIOS settings: \ > http://vdrportal.de/board/thread.php?threadid=33772 > > I already put the Nexus-S in another PCI slot, but with no result. Any > other options ? Usually av7110_bootarm() errors indicate some kind of hardware problem. - Verify that the card is properly seated in the pci slot. - Try another pci slot. (Ok, you did this already.) - Try with a different computer. - Test the card withon a windows machine. There have been reports at vdr-portal about problems with some rev. 2.3 cards: - http://vdrportal.de/board/thread.php?threadid=33772 - http://www.vdrportal.de/board/thread.php?threadid=33597 Apparently some rev 2.3 cards have problems with some mainboards or power supplies. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ --------------------------------------------------------
