Hello Every body, I have some difficulty with my USB DVB-T card . I'm try to up an interface DVB0_0 (with dvbnet on dvb-utils packet on Debian) And after I capture some packet with. I'm able to do this with one PC but My second PC cannot do it. If I make a tzap it works fine and if I want see some TV with I'm able to do it. My interface are up but I see no packet. I'm sure that signal is fine because I have tested it. I haven't found any difference between my 2 kernels (But I think it's probably there a problem). Every packet On my good PC are install to my "Evil" PC. I have no idea of my problem I hope someone can help me... Thank a lot, Olivier. P.S: I'm french and I hope my english are readable.... My kernel are 2.6.8.1 and I can't change it (I have some application that i work only on it). I join to you my Dmesg on evil PC: ohci_hcd 0000:00:0c.1: wakeup ohci_hcd 0000:00:0c.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:0c.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE S CCS usb 2-1: new full speed USB device using address 5 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: default language 0x0409 usb 2-1: Product: TT-DVB-T USB usb 2-1: Manufacturer: TechnoTrend AG usb 2-1: hotplug usb 2-1: adding 2-1:1.1 (config #1, interface 1) usb 2-1:1.1: hotplug Technotrend/Hauppauge USB-Nova 2-1:1.1: usb_probe_interface Technotrend/Hauppauge USB-Nova 2-1:1.1: usb_probe_interface - got id ip6_input_finish: called [input START] ttusb_init_controller: dsp-version: 0.0 DVB: registering new adapter (Technotrend/Hauppauge Nova-USB). bt878 find by dvb adap: checking "Technotrend/Hauppauge Nova-USB" bt878 find by dvb adap: NOT found "Technotrend/Hauppauge Nova-USB" tda1004x: Detected Philips TDA10046H. tda1004x: Detected Philips TD1316 tuner. DVB: registering frontend 0:0 (Philips TDA10046H)... DVB: registering frontend 0:0 (Microtune MT7202DTF)... usb 2-1: adding 2-1:1.0 (config #1, interface 0) usb 2-1:1.0: hotplug Technotrend/Hauppauge USB-Nova 2-1:1.0: usb_probe_interface Technotrend/Hauppauge USB-Nova 2-1:1.0: usb_probe_interface - got id
