Hi, I've been trying to get a Nova T USB working. I used the CVS tarball from 2nd May, with the firmware from that release. (Running a 2.6.9 kernel, twin PIII 533, USB 1.0) The signal to the box is good, (checked with another Nova T pci card), The USB box seems to install ok (see kernel below), but I cannot get scan or tzap to work... It seems to find the first multiplex, but not the rest (see trace below) Is it something to do with the "will use the device's hw PID filter.", if so how do I use it? or have I done something wrong here please help -malc- May 3 21:34:37 firebird kernel: dvb_usb_dibusb_common: module license 'unspecified' taints kernel. May 3 21:34:37 firebird kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state. May 3 21:34:37 firebird kernel: dvb-usb: will use the device's hw PID filter. May 3 21:34:37 firebird kernel: DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2). May 3 21:34:37 firebird kernel: dvb-usb: MAC address: 00:0d:fe:02:45:d5 May 3 21:34:37 firebird kernel: dib3000: Found a DiBcom 3000P. May 3 21:34:37 firebird kernel: DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)... May 3 21:34:37 firebird kernel: dvb-usb: schedule remote query interval to 100 msecs. May 3 21:34:37 firebird kernel: dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. May 3 21:34:37 firebird kernel: usbcore: registered new driver Hauppauge WinTV-NOVA-T usb2 -------------------------------------------------------- .......#./dvbscan dvb-t/uk-WinterHill scanning dvb-t/uk-WinterHill using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 754166670 0 3 9 1 0 0 0 >>> tune to: 754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE 0x0000 0x1048: pmt_pid 0x0000 BBC -- BBC ONE (???) 0x0000 0x1088: pmt_pid 0x0000 BBC -- BBC TWO (???) 0x0000 0x10ff: pmt_pid 0x0000 BBC -- BBC THREE (???) 0x0000 0x113f: pmt_pid 0x0000 BBC -- BBC NEWS 24 (???) 0x0000 0x117f: pmt_pid 0x0000 BBC -- BBCi (???) 0x0000 0x123f: pmt_pid 0x0000 BBC -- CBBC Channel (???) WARNING: filter timeout pid 0x0010 dumping lists (6 services) BBC ONE:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:600:601:4168 BBC TWO:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:610:611:4232 BBC THREE:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:620:621:4351 BBC NEWS 24:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:640:641:4415 BBCi:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:4479 CBBC Channel:754166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:4671 Done. ------------------------------------------------------------------- ......#./tzap "BBC ONE" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 754166670 Hz video pid 0x0258, audio pid 0x0259 status 01 | signal 0000 | snr ffff | ber 001fffff | unc 0000ffff | status 01 | signal ff3f | snr 0001 | ber 001fffff | unc 0000ffff | status 01 | signal ff3f | snr 0001 | ber 001fffff | unc 0000ffff | status 01 | signal ff3f | snr 0001 | ber 001fffff | unc 0000ffff | ---------------------------
