> > > I was directed here regarding using the remote control for my AverTV > > > DVB-T 771. > > > > I had that remote control running some time ago by adding a lot of > > parameters to modprobe. I found it on the lirc-list: > > > > http://sourceforge.net/mailarchive/message.php?msg_id=7719048 > > Ah, excellent - could you please supply your lircd.conf? That archive > doesn't seem to retain attachments :( If lirc_gpio loaded successfully, you can use irrecord to create a configuration file. I attached my lircd.conf anyway. Olaf -------------- next part -------------- # Please make this file available to others # by sending it to <lirc@xxxxxxxxxxxx> # # this config file was automatically generated # using lirc-0.7.1-CVS(avermedia) on Tue Jan 11 20:55:36 2005 # # contributed by # # brand: test.conf # model no. of remote control: # devices being controlled by this remote: # begin remote name AVerTV_DVB-T_771 bits 8 eps 30 aeps 100 one 0 0 zero 0 0 gap 199892 toggle_bit 0 begin codes 1 0x75 2 0xB5 3 0x35 4 0x6D 5 0xAD 6 0x2D 7 0x65 8 0xA5 9 0x25 0 0x5D source 0x7D teletext 0xBD power 0xFD audio 0xED fullscreen 0xE5 preview 0xDD display 0x9D loop 0x1D backward 0x55 forward 0x95 capture 0x15 mute 0xD5 record 0x4D pause 0x8D stop 0x0D play 0xCD ok 0xC5 cancel 0xF9 volume+ 0x05 volume- 0x85 next 0x39 previous 0xB9 red 0x45 green 0x79 yellow 0xC5 blue 0xF9 enter 0x5D end codes end remote
