I have Budget card and two CAM's, Matrix Revolutions and X-CAM. These CAM's can deal with multiple encryption systems and they operate perfectly in a Set-top Box, each was tested for decrypting both Mediaguard and Viaccess with valid cards. When I test those CAM's with CVS drivers they both initialize successfully but no decryption seems to take place, TS packets coming out are still encrypted. What might be the reasons for perfect initialisation but no actual decryption happening? Where one should try to look to make the driver working with those CAM's? Is there something missing in the CVS drivers comparing to what is available in any Set-top? I would appreciate receiving any hint or help. irk Here is the dmesg log: DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). adapter has MAC addr = 00:d0:5c:02:b9:c3 dvb_ca_en50221_init budget_ci: CI interface initialised CAMCHANGE IRQ slot:0 change_type:1 dvb_ca_en50221_thread_wakeup dvb_ca_en50221_thread CAMREADY IRQ slot:0 dvb_ca_en50221_thread_wakeup TUPLE type:0x1d length:4 0x00: 0x00 . 0x01: 0xdb . 0x02: 0x08 . 0x03: 0xff . TUPLE type:0x1c length:3 0x00: 0x00 . 0x01: 0x08 . 0x02: 0xff . TUPLE type:0x15 length:21 0x00: 0x05 . 0x01: 0x00 . 0x02: 0x53 S 0x03: 0x43 C 0x04: 0x4d M 0x05: 0x00 . 0x06: 0x44 D 0x07: 0x56 V 0x08: 0x42 B 0x09: 0x20 0x0a: 0x43 C 0x0b: 0x41 A 0x0c: 0x20 0x0d: 0x4d M 0x0e: 0x6f o 0x0f: 0x64 d 0x10: 0x75 u 0x11: 0x6c l 0x12: 0x65 e 0x13: 0x00 . 0x14: 0xff . TUPLE type:0x20 length:4 0x00: 0xff . 0x01: 0xff . 0x02: 0x01 . 0x03: 0x00 . TUPLE type:0x1a length:21 0x00: 0x01 . 0x01: 0x0f . 0x02: 0x00 . 0x03: 0x02 . 0x04: 0x01 . 0x05: 0xc0 . 0x06: 0x0e . 0x07: 0x41 A 0x08: 0x02 . 0x09: 0x44 D 0x0a: 0x56 V 0x0b: 0x42 B 0x0c: 0x5f _ 0x0d: 0x43 C 0x0e: 0x49 I 0x0f: 0x5f _ 0x10: 0x56 V 0x11: 0x31 1 0x12: 0x2e . 0x13: 0x30 0 0x14: 0x30 0 TUPLE type:0x1b length:17 0x00: 0xc9 . 0x01: 0x41 A 0x02: 0x19 . 0x03: 0x37 7 0x04: 0x55 U 0x05: 0x4e N 0x06: 0x5e ^ 0x07: 0x1d . 0x08: 0x56 V 0x09: 0xaa . 0x0a: 0x60 ` 0x0b: 0x20 0x0c: 0x03 . 0x0d: 0x03 . 0x0e: 0x50 P 0x0f: 0xff . 0x10: 0xff . TUPLE type:0x1b length:37 0x00: 0xcf . 0x01: 0x04 . 0x02: 0x09 . 0x03: 0x37 7 0x04: 0x55 U 0x05: 0x4d M 0x06: 0x5d ] 0x07: 0x1d . 0x08: 0x56 V 0x09: 0x22 " 0x0a: 0xc0 . 0x0b: 0x09 . 0x0c: 0x44 D 0x0d: 0x56 V 0x0e: 0x42 B 0x0f: 0x5f _ 0x10: 0x48 H 0x11: 0x4f O 0x12: 0x53 S 0x13: 0x54 T 0x14: 0x00 . 0x15: 0xc1 . 0x16: 0x0e . 0x17: 0x44 D 0x18: 0x56 V 0x19: 0x42 B 0x1a: 0x5f _ 0x1b: 0x43 C 0x1c: 0x49 I 0x1d: 0x5f _ 0x1e: 0x4d M 0x1f: 0x4f O 0x20: 0x44 D 0x21: 0x55 U 0x22: 0x4c L 0x23: 0x45 E 0x24: 0x00 . TUPLE type:0x14 length:0 END OF CHAIN TUPLE type:0xff Valid DVB CAM detected MANID:ffff DEVID:1 CONFIGBASE:0x200 CONFIGOPTION:0xf dvb_ca_en50221_set_configoption Set configoption 0xf, read configoption 0x5 DVB CAM validated successfully dvb_ca_en50221_link_init FR/DA IRQ slot:0 CAM supports DA IRQ dvb_ca_en50221_wait_if_status dvb_ca_en50221_wait_if_status succeeded timeout:0 dvb_ca_en50221_read_data Received CA packet for slot 0 connection id 0x1 last_frag:1 size:0x2 Chosen link buffer size of 256 dvb_ca_en50221_wait_if_status dvb_ca_en50221_wait_if_status succeeded timeout:0 dvb_ca_en50221_write_data Wrote CA packet for slot 0, connection id 0x1 last_frag:1 size:0x2 dvb_ca adapter 1: DVB CAM detected and initialised successfully -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050329/a63edde1/attachment.htm
