Hi all, I have just touched DVB-S since one week ago. I have a Hauppauge WinTV Nexus-S rev2.2 card, while having Redhat Enterprise 3.95 installed on a DELL Precision 670 workstation. Now I use Linux kernel 2.6.11.6 with DVB modules selected. I modified the udev configuration so that /dev/dvb/adapter0/* are all generated correctly, while I downloaded and placed the firmware into /lib/firmware as dvb-ttpci-01.fw. Then I created a initial-tuning-data file to scan channels with dvbscan based on Asiasat3S-105.5E transmitter. Many channels are found, so I use szap to select one channel I would like to watch. However both mp4live and xawtv, based on v4l2 API, do not work. Nothing can be seen except of blank screen. And then I use another two methods listed below, but all of them work. $ cat /dev/dvb/adapter0/dvr0 > dvb-test.ts $ mplayer /dev/dvb/adapter0/dvr0 So can anybody help me? Below is the log relevant. Thanks. Jesse ------------------------------ Mar 27 21:12:30 aaa kernel: Linux video capture interface: v1.00 Mar 27 21:12:30 aaa kernel: saa7146: register extension 'dvb'. Mar 27 21:12:30 aaa kernel: ACPI: PCI interrupt 0000:06:0d.0[A] -> GSI 17 (level, low) -> IRQ 193 Mar 27 21:12:30 aaa kernel: saa7146: found saa7146 @ mem f897a600 (revision 1, irq 193) (0x13c2,0x0003). Mar 27 21:12:31 aaa kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). Mar 27 21:12:31 aaa kernel: adapter has MAC addr = 00:d0:5c:22:8c:9c Mar 27 21:12:31 aaa kernel: dvb-ttpci: gpioirq unknown type=0 len=0 Mar 27 21:12:31 aaa kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d Mar 27 21:12:31 aaa kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface Mar 27 21:12:31 aaa kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected Mar 27 21:12:31 aaa kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] Mar 27 21:12:31 aaa kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... Mar 27 21:12:31 aaa kernel: dvb-ttpci: found av7110-0. Mar 27 21:12:31 aaa kernel: cx2388x v4l2 driver version 0.0.4 loaded Mar 27 21:12:31 aaa kernel: ACPI: PCI interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 201 Mar 27 21:12:31 aaa kernel: cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected] Mar 27 21:12:31 aaa kernel: cx88[0]: hauppauge eeprom: model=34519, tuner=? (-1), radio=yes Mar 27 21:12:31 aaa wait_for_sysfs[3618]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/printer' properly (class specific file unavailable) or the sysfs-support of your device's driver needs to be fixed, please report to <linux-hotplug-devel@xxxxxxxxxxxxxxxxxxxxx> Mar 27 21:12:31 aaa kernel: cx88[0]/0: found at 0000:03:0d.0, rev: 3, irq: 201, latency: 64, mmio: 0xdd000000 Mar 27 21:12:31 aaa kernel: tuner: chip found at addr 0xc2 i2c-bus cx88[0] Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device video1 [v4l2] Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device vbi0 Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device radio0 _________________________________________________________ Do You Yahoo!? 150??MP3???????????? http://music.yisou.com/ ??????????????????? http://image.yisou.com 1G??1000??????????? http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
