Gregor Kroesen wrote: > Oliver Endriss wrote: > > May I assume that 0x10 is the I2C address? > yes , it is. Thanks. I've committed basic support for the Nexus 2.3 to the CVS: - subsystem id - alps_bsbe1 inittab - alps_bsbe1_pll_set - lnbp21 voltage switching [*] - lnb current limited to 550mA (for now) [*] Assuming that the LNBP21 is at I2C address 0x10. Unfortunately, I have no hardware to test. I still need more information: > > [1] Did you check the specs of your card whether it can supply > > 550mA or 650 mA current at the LNB input? > > If there is no information, it might be better to limit the current > > to 550mA. -> Set bit 6. > > > > [2] Could someone please tell me whether DSQIN or EXTM are used on the > > Nexus 2.3? On the older cards DiSEqC was done by the av7111. Please test. All low band channels should work now. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ --------------------------------------------------------
