On Sun, 2017-03-19 at 12:14 +0000, Russell King - ARM Linux wrote: > On Sat, Mar 18, 2017 at 12:58:27PM -0700, Steve Longerbeam wrote: > > On 03/18/2017 12:22 PM, Russell King - ARM Linux wrote: > > >0:00:01.955927879 20954 0x15ffe90 INFO v4l2 gstv4l2object.c:3811:gst_v4l2_object_get_caps:<v4l2src0> probed caps: video/x-bayer, format=(string)rggb, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)I420, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)YV12, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)BGR, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)RGB, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1 > > > > > > despite the media pipeline actually being configured for 60fps. > > > > > > Forcing it by adjusting the pipeline only results in gstreamer > > > failing, because it believes that v4l2 is unable to operate at > > > 60fps. > > > > > > Also note the complaints from v4l2src about the non-compliance... > > > > Thanks, I've fixed most of v4l2-compliance issues, but this is not > > done yet. Is that something you can help with? > > I've looked at this, and IMHO it's yet another media control API mess. > > - media-ctl itself allows setting the format on subdev pads via > struct v4l2_subdev_format. > > - struct v4l2_subdev_format contains a struct v4l2_mbus_framefmt. > > - struct v4l2_mbus_framefmt contains: > * @width: frame width > * @height: frame height > * @code: data format code (from enum v4l2_mbus_pixelcode) > * @field: used interlacing type (from enum v4l2_field) > * @colorspace: colorspace of the data (from enum v4l2_colorspace) > * @ycbcr_enc: YCbCr encoding of the data (from enum v4l2_ycbcr_encoding) > * @quantization: quantization of the data (from enum v4l2_quantization) > * @xfer_func: transfer function of the data (from enum v4l2_xfer_func) > > - media-ctl sets width, height, code and field, but nothing else. > > We're already agreed that the fields that media-ctl are part of the > format negotiation between the ultimate source, flowing down to the > capture device. However, there's no support in media-ctl to deal > with these other fields - so media-ctl in itself is only half- > implemented. To set and read colorimetry information: https://patchwork.linuxtv.org/patch/39350/ regards Philipp _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
