This patch fix some spelling typos found in visornic_main.c Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx> --- drivers/staging/unisys/visornic/visornic_main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c index 0a8f36125f5b..c44c430b966f 100644 --- a/drivers/staging/unisys/visornic/visornic_main.c +++ b/drivers/staging/unisys/visornic/visornic_main.c @@ -423,7 +423,7 @@ send_enbdis(struct net_device *netdev, int state, /** * visornic_disable_with_timeout - Disable network adapter - * @netdev: netdevice to disale + * @netdev: netdevice to disable * @timeout: timeout to wait for disable * * Disable the network adapter and inform the IO Partition that we @@ -532,7 +532,7 @@ init_rcv_bufs(struct net_device *netdev, struct visornic_devdata *devdata) return -ENOMEM; count = i; - /* Ensure we can alloc 2/3rd of the requeested number of buffers. + /* Ensure we can alloc 2/3rd of the requested number of buffers. * 2/3 is an arbitrary choice; used also in ndis init.c */ if (count < ((2 * devdata->num_rcv_bufs) / 3)) { @@ -561,7 +561,7 @@ init_rcv_bufs(struct net_device *netdev, struct visornic_devdata *devdata) * * Sends enable to IOVM, inits, and posts receive buffers to IOVM * timeout is defined in msecs (timeout of 0 specifies infinite wait) - * Return 0 for success, negavite for failure. + * Return 0 for success, negative for failure. */ static int visornic_enable_with_timeout(struct net_device *netdev, const int timeout) @@ -750,7 +750,7 @@ static inline bool vnic_hit_low_watermark(struct visornic_devdata *devdata, * @skb: Packet to be sent * @netdev: net device the packet is being sent from * - * Convert the skb to a cmdrsp so the IO Partition can undersand it. + * Convert the skb to a cmdrsp so the IO Partition can understand it. * Send the XMIT command to the IO Partition for processing. This * function is protected from concurrent calls by a spinlock xmit_lock * in the net_device struct, but as soon as the function returns it @@ -1097,7 +1097,7 @@ repost_return(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata, * * Got a receive packet back from the IO Part, handle it and send * it up the stack. - * Returns 1 iff an skb was receieved, otherwise 0 + * Returns 1 iff an skb was received, otherwise 0 */ static int visornic_rx(struct uiscmdrsp *cmdrsp) @@ -1227,7 +1227,7 @@ visornic_rx(struct uiscmdrsp *cmdrsp) } } - /* set up packet's protocl type using ethernet header - this + /* set up packet's protocol type using ethernet header - this * sets up skb->pkt_type & it also PULLS out the eth header */ skb->protocol = eth_type_trans(skb, netdev); @@ -1549,7 +1549,7 @@ drain_resp_queue(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata) * @cmdrsp: io channel command response message * @devdata: visornic device to drain * - * Drain the respones queue of any responses from the IO partition. + * Drain the response queue of any responses from the IO partition. * Process the responses as we get them. * Returns when response queue is empty or when the thread stops. */ @@ -1665,7 +1665,7 @@ static int visornic_poll(struct napi_struct *napi, int budget) * poll_for_irq - Checks the status of the response queue. * @v: void pointer to the visronic devdata * - * Main function of the vnic_incoming thread. Peridocially check the + * Main function of the vnic_incoming thread. Periodically check the * response queue and drain it if needed. * Returns when thread has stopped. */ @@ -1711,7 +1711,7 @@ static int visornic_probe(struct visor_device *dev) netdev->watchdog_timeo = 5 * HZ; SET_NETDEV_DEV(netdev, &dev->device); - /* Get MAC adddress from channel and read it into the device. */ + /* Get MAC address from channel and read it into the device. */ netdev->addr_len = ETH_ALEN; channel_offset = offsetof(struct spar_io_channel_protocol, vnic.macaddr); @@ -1835,7 +1835,7 @@ static int visornic_probe(struct visor_device *dev) /* Let's start our threads to get responses */ netif_napi_add(netdev, &devdata->napi, visornic_poll, NAPI_WEIGHT); - /* Note: Interupts have to be enable before the while + /* Note: Interrupts have to be enable before the while * loop below because the napi routine is responsible for * setting enab_dis_acked */ @@ -1848,7 +1848,7 @@ static int visornic_probe(struct visor_device *dev) goto cleanup_napi_add; } - /* create debgug/sysfs directories */ + /* create debug/sysfs directories */ devdata->eth_debugfs_dir = debugfs_create_dir(netdev->name, visornic_debugfs_dir); if (!devdata->eth_debugfs_dir) { -- 2.11.0.485.g4e59582ff70d _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel