Fix checkpatch.pl warning for trailing */ on a separate line
Remove '+' postfix and '-' prefix from the start and end of block comments
Signed-off-by: Anson Jacob <ansonjacob.aj@xxxxxxxxx>
---
drivers/staging/vt6655/rf.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index ae10da2..447882c 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -169,7 +169,8 @@ static unsigned long dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
};
/* 40MHz reference frequency
- * Need to Pull PLLON(PE3) low when writing channel registers through 3-wire.*/
+ * Need to Pull PLLON(PE3) low when writing channel registers through 3-wire.
+ */
static const unsigned long dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, /* Channel1 // Need modify for 11a */
0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, /* Channel1 // Need modify for 11a */
@@ -463,7 +464,8 @@ static bool s_bAL7230Init(struct vnt_private *priv)
}
/* Need to Pull PLLON low when writing channel registers through
- * 3-wire interface */
+ * 3-wire interface
+ */
static bool s_bAL7230SelectChannel(struct vnt_private *priv, unsigned char byChannel)
{
void __iomem *dwIoBase = priv->PortOffset;
@@ -873,7 +875,8 @@ bool RFbRawSetPower(
case RF_AIROHA7230:
/* 0x080F1B00 for 3 wire control TxGain(D10)
- * and 0x31 as TX Gain value */
+ * and 0x31 as TX Gain value
+ */
dwMax7230Pwr = 0x080C0B00 | ((byPwr) << 12) |
(BY_AL7230_REG_LEN << 3) | IFREGCTL_REGW;
@@ -886,7 +889,7 @@ bool RFbRawSetPower(
return ret;
}
-/*+
+/*
*
* Routine Description:
* Translate RSSI to dBm
@@ -900,7 +903,7 @@ bool RFbRawSetPower(
*
* Return Value: none
*
- -*/
+ */
void
RFvRSSITodBm(
struct vnt_private *priv,
@@ -927,7 +930,8 @@ RFvRSSITodBm(
}
/* Post processing for the 11b/g and 11a.
- * for save time on changing Reg2,3,5,7,10,12,15 */
+ * for save time on changing Reg2,3,5,7,10,12,15
+ */
bool RFbAL7230SelectChannelPostProcess(struct vnt_private *priv,
u16 byOldChannel,
u16 byNewChannel)
@@ -938,7 +942,8 @@ bool RFbAL7230SelectChannelPostProcess(struct vnt_private *priv,
/* if change between 11 b/g and 11a need to update the following
* register
- * Channel Index 1~14 */
+ * Channel Index 1~14
+ */
if ((byOldChannel <= CB_MAX_CHANNEL_24G) && (byNewChannel > CB_MAX_CHANNEL_24G)) {
/* Change from 2.4G to 5G [Reg] */
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[2]);
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
