[PATCH 08/10] staging: rtl8188eu: remove PWR_FAB_*_MSK macro definitions and fab_msk of wl_pwr_cfg structure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



fab_msk used for marking commands
for devices of a certain manufacturer.

However, always used only PWR_FAB_ALL_MSK value of fab_msk.

Most likely, such mark is useless.

Signed-off-by: Ivan Safonov <insafonov@xxxxxxxxx>
---
 drivers/staging/rtl8188eu/hal/pwrseqcmd.c     |  10 +-
 drivers/staging/rtl8188eu/hal/usb_halinit.c   |   9 +-
 drivers/staging/rtl8188eu/include/pwrseq.h    | 138 +++++++++++++-------------
 drivers/staging/rtl8188eu/include/pwrseqcmd.h |   9 +-
 4 files changed, 77 insertions(+), 89 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
index 3e60b23..7eb1fdb 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
@@ -23,7 +23,7 @@
 /* This routine deals with the Power Configuration CMDs parsing
  * for RTL8723/RTL8188E Series IC.
  */
-u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
+u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
 			    u8 ifacetype, struct wl_pwr_cfg pwrseqcmd[])
 {
 	struct wl_pwr_cfg pwrcfgcmd = {0};
@@ -39,20 +39,18 @@ u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
 
 		RT_TRACE(_module_hal_init_c_, _drv_info_,
 			 ("rtl88eu_pwrseqcmdparsing: offset(%#x) cut_msk(%#x)"
-			  "fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x)"
+			  "interface_msk(%#x) base(%#x) cmd(%#x)"
 			  "msk(%#x) value(%#x)\n",
 			 GET_PWR_CFG_OFFSET(pwrcfgcmd),
 			 GET_PWR_CFG_CUT_MASK(pwrcfgcmd),
-			 GET_PWR_CFG_FAB_MASK(pwrcfgcmd),
 			 GET_PWR_CFG_INTF_MASK(pwrcfgcmd),
 			 GET_PWR_CFG_BASE(pwrcfgcmd),
 			 GET_PWR_CFG_CMD(pwrcfgcmd),
 			 GET_PWR_CFG_MASK(pwrcfgcmd),
 			 GET_PWR_CFG_VALUE(pwrcfgcmd)));
 
-		/* Only Handle the command whose FAB, CUT, and Interface are matched */
-		if ((GET_PWR_CFG_FAB_MASK(pwrcfgcmd) & fab_vers) &&
-		    (GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) &&
+		/* Only Handle the command whose CUT and Interface are matched */
+		if ((GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) &&
 		    (GET_PWR_CFG_INTF_MASK(pwrcfgcmd) & ifacetype)) {
 			switch (GET_PWR_CFG_CMD(pwrcfgcmd)) {
 			case PWR_CMD_READ:
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 5789e1e..0868635 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -107,8 +107,7 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
 	if (haldata->bMacPwrCtrlOn)
 		return _SUCCESS;
 
-	if (!rtl88eu_pwrseqcmdparsing(adapt, PWR_CUT_ALL_MSK,
-				      PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,
+	if (!rtl88eu_pwrseqcmdparsing(adapt, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
 				      Rtl8188E_NIC_PWR_ON_FLOW)) {
 		DBG_88E(KERN_ERR "%s: run power on flow fail\n", __func__);
 		return _FAIL;
@@ -925,8 +924,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
 	usb_write8(Adapter, REG_CR, 0x0);
 
 	/*  Run LPS WL RFOFF flow */
-	rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
-				 PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,
+	rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
 				 Rtl8188E_NIC_LPS_ENTER_FLOW);
 
 	/*  2. 0x1F[7:0] = 0		turn off RF */
@@ -948,8 +946,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
 	usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT(0)));
 
 	/*  Card disable power action flow */
-	rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
-				 PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,
+	rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
 				 Rtl8188E_NIC_DISABLE_FLOW);
 
 	/*  Reset MCU IO Wrapper */
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h
index 8c876c6..bf89d7c 100644
--- a/drivers/staging/rtl8188eu/include/pwrseq.h
+++ b/drivers/staging/rtl8188eu/include/pwrseq.h
@@ -60,253 +60,253 @@
 
 #define RTL8188E_TRANS_CARDEMU_TO_ACT					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+	 * { offset, cut_msk, interface_msk, base|cmd, msk, value
 	 * },
 	 * comment here
 	 */								\
-	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
 	/* wait till 0x04[17] = 1    power ready*/	\
-	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) | BIT(1), 0},		\
 	/* 0x02[1:0] = 0	reset BB*/				\
-	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
 	/*0x24[23] = 2b'01 schmit trigger */				\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},			\
 	/* 0x04[15] = 0 disable HWPDN (control by DRV)*/		\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), 0},		\
 	/*0x04[12:11] = 2b'00 disable WL suspend*/			\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
 	/*0x04[8] = 1 polling until return 0*/				\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0},			\
 	/*wait till 0x04[8] = 0*/					\
-	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
 	/*LDO normal mode*/						\
-	{0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0074, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
 	/*SDIO Driving*/
 
 #define RTL8188E_TRANS_ACT_TO_CARDEMU					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+	 * { offset, cut_msk, interface_msk, base|cmd, msk, value
 	 * },
 	 * comments here
 	 */								\
-	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},			\
 	/*0x1F[7:0] = 0 turn off RF*/					\
-	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
 	/*LDO Sleep mode*/						\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
 	/*0x04[9] = 1 turn off MAC by HW state machine*/		\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0},			\
 	/*wait till 0x04[9] = 0 polling until return 0 to disable*/
 
 #define RTL8188E_TRANS_CARDEMU_TO_SUS					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0005, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)},			\
 	/* 0x04[12:11] = 2b'01enable WL suspend */			\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_PCI_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)}, \
 	/* 0x04[12:11] = 2b'11enable WL suspend for PCIe */		\
-	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0007, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, 0xFF, BIT(7)},					\
 	/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
-	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0041, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, BIT(4), 0},					\
 	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
-	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0xfe10, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, BIT(4), BIT(4)},					\
 	/*Set USB suspend enable local register  0xfe10[4]=1 */		\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
 	/*Set SDIO suspend local register*/				\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},			\
 	/*wait power state to suspend*/
 
 #define RTL8188E_TRANS_SUS_TO_CARDEMU					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
 	/*Set SDIO suspend local register*/				\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
 	/*wait power state to suspend*/					\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0},		\
 	/*0x04[12:11] = 2b'01enable WL suspend*/
 
 #define RTL8188E_TRANS_CARDEMU_TO_CARDDIS				\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
 	/*0x24[23] = 2b'01 schmit trigger */				\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0005, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)},			\
 	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
-	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0007, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, 0xFF, 0},					\
 	/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
-	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	{0x0041, PWR_CUT_ALL_MSK, \
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
 	PWR_CMD_WRITE, BIT(4), 0},					\
 	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
-	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	{0xfe10, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
 	/*Set USB suspend enable local register  0xfe10[4]=1 */		\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
 	/*Set SDIO suspend local register*/				\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},			\
 	/*wait power state to suspend*/
 
 #define RTL8188E_TRANS_CARDDIS_TO_CARDEMU				\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
 	/*Set SDIO suspend local register*/				\
-	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
 	/*wait power state to suspend*/					\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0},		\
 	/*0x04[12:11] = 2b'01enable WL suspend*/
 
 #define RTL8188E_TRANS_CARDEMU_TO_PDN					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
 	/* 0x04[16] = 0*/						\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
 	/* 0x04[15] = 1*/
 
 #define RTL8188E_TRANS_PDN_TO_CARDEMU					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},			\
 	/* 0x04[15] = 0*/
 
 /* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
 #define RTL8188E_TRANS_ACT_TO_LPS					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/	\
-	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
 	/*Should be zero if no packet is transmitting*/			\
-	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
 	/*Should be zero if no packet is transmitting*/			\
-	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
 	/*Should be zero if no packet is transmitting*/			\
-	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
 	/*Should be zero if no packet is transmitting*/			\
-	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
 	/*CCK and OFDM are disabled,and clock are gated*/		\
-	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0,				\
 	PWRSEQ_DELAY_US},/*Delay 1us*/					\
-	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/	\
-	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/\
-	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},		\
 	/*Respond TxOK to scheduler*/
 
 
 #define RTL8188E_TRANS_LPS_TO_ACT					\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	{0x0080, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK,	\
 	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/	\
-	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/	\
-	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_INTF_PCI_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/	\
-	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/	\
-	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
 	/* 0x08[4] = 0 switch TSF to 40M */				\
-	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0},			\
 	/* Polling 0x109[7]=0  TSF in 40M */				\
-	{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0029, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6) | BIT(7), 0},		\
 	/* 0x29[7:6] = 2b'00  enable BB clock */			\
-	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
 	/* 0x101[1] = 1 */						\
-	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
 	/* 0x100[7:0] = 0xFF enable WMAC TRX */				\
-	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
 	/* 0x02[1:0] = 2b'11 enable BB macro */				\
-	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK,	\
 	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*.	0x522 = 0*/
 
 #define RTL8188E_TRANS_END						\
 	/* format
-	 * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+	 * { offset, cut_msk, interface_msk, base|cmd, msk,
 	 * value },
 	 * comments here
 	 */								\
-	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0,	\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, 0,	\
 	PWR_CMD_END, 0, 0},
 
 
diff --git a/drivers/staging/rtl8188eu/include/pwrseqcmd.h b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
index 980a497..ccc066a 100644
--- a/drivers/staging/rtl8188eu/include/pwrseqcmd.h
+++ b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
@@ -42,11 +42,6 @@
 #define PWR_INTF_PCI_MSK	BIT(2)
 #define PWR_INTF_ALL_MSK	(BIT(0)|BIT(1)|BIT(2)|BIT(3))
 
-/* The value of fab_msk: 4 bits */
-#define PWR_FAB_TSMC_MSK	BIT(0)
-#define PWR_FAB_UMC_MSK		BIT(1)
-#define PWR_FAB_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
 /* The value of cut_msk: 8 bits */
 #define PWR_CUT_TESTCHIP_MSK	BIT(0)
 #define PWR_CUT_A_MSK		BIT(1)
@@ -67,7 +62,6 @@ enum pwrseq_cmd_delat_unit {
 struct wl_pwr_cfg {
 	u16 offset;
 	u8 cut_msk;
-	u8 fab_msk:4;
 	u8 interface_msk:4;
 	u8 base:4;
 	u8 cmd:4;
@@ -77,14 +71,13 @@ struct wl_pwr_cfg {
 
 #define GET_PWR_CFG_OFFSET(__PWR_CMD)		__PWR_CMD.offset
 #define GET_PWR_CFG_CUT_MASK(__PWR_CMD)		__PWR_CMD.cut_msk
-#define GET_PWR_CFG_FAB_MASK(__PWR_CMD)		__PWR_CMD.fab_msk
 #define GET_PWR_CFG_INTF_MASK(__PWR_CMD)	__PWR_CMD.interface_msk
 #define GET_PWR_CFG_BASE(__PWR_CMD)		__PWR_CMD.base
 #define GET_PWR_CFG_CMD(__PWR_CMD)		__PWR_CMD.cmd
 #define GET_PWR_CFG_MASK(__PWR_CMD)		__PWR_CMD.msk
 #define GET_PWR_CFG_VALUE(__PWR_CMD)		__PWR_CMD.value
 
-u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
+u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
 			    u8 ifacetype, struct wl_pwr_cfg pwrcfgCmd[]);
 
 #endif
-- 
2.4.10

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux