Hi Andrey, Hmm, it looks like I forgot to reply. Sorry about that. On 01/15/2016 03:13 AM, Andrey Utkin wrote: > On Mon, Jan 11, 2016 at 12:52 PM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote: >> Did you also test with v4l2-compliance? Before I accept the driver I want to see the >> output of 'v4l2-compliance' and 'v4l2-compliance -s'. Basically there shouldn't be >> any failures. >> >> I did a quick scan over the source and I saw nothing big. When you post the new >> version I will go over it more carefully and do a proper review. > > Thank you for review. > You can find output of v4l2-compliance and v4l2-compliance -s tests > below (v4l-utils-1.8.0-42-gf1348b4). > There are some issues, I will work on them. > Could you please advise how could I optimize high-volume data passing > to userspace apps? > In one installation with 16 boards, when all streams are set to be 30 > FPS all-I-frames (workaround for another P-frames quality issue), the > host struggles from regular lockups, see message immediately below > (4.2.0 kernel though, DKMS package with slightly modified code to > match older API). > I am not fully sure it is related to my driver, but I guess memcpy-ish > approach to preparing video frames may be very CPU-expensive. 30 FPS > all-I-frames video stream is like 3 megabytes per second. > Of course this is not very good situation anyway, and I should either > fix original issue or find some workarounds, at last to lower > framerate. But still, optimization of data passing using some > appropriate API like scatter-gather should be done I believe. I need > hints how to do that right. > Thanks in advance. If I understand it correctly the problem is that you need to insert h264 headers in front of the data, and for that you need to do a memcpy, for now at least. We are looking into mechanisms to pass the header separately from the video frame data, but I don't dare give an ETA when that arrives in the kernel. That said, it makes no sense to use H264 with I frames only, it defeats the purpose of H264. I would concentrate on making the encoder work correcly as that will dramatically reduce the amount of data to memcpy. For SDTV inputs you can get good quality using an MPEG-2 encoder with just 1 MB/s in my experience. H264 should reduce that further. And doing a memcpy for worst-case 4*16 = 64 MB/s should not be a problem at all for modern CPUs. Frankly, even 3*64 = 192 MB/s as you have now shouldn't pose a problem. I wouldn't change the memcpy: in my experience it is very useful to get a well-formed compressed stream out of the hardware. And the overhead of having to do a memcpy is a small price to pay and on modern CPUs should be barely noticeable for SDTV inputs. I don't believe that the lockups you see are related to the memcpy as such. The trace says that a cpu is stuck for 22s, no way that is related to something like that. It looks more like a deadlock somewhere. Regarding the compliance tests: don't pass VB2_USERPTR (doesn't work well with videobuf2-dma-contig). Also add vidioc_expbuf = vb2_ioctl_expbuf for the DMABUF support. That should clear up some of the errors you see. Regards, Hans > > Jan 13 19:35:20 cctv kernel: [34202.715069] NMI watchdog: BUG: soft > lockup - CPU#2 stuck for 22s! [khugepaged:69] > Jan 13 19:35:20 cctv kernel: [34202.715071] Modules linked in: ib_iser > rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp > libiscsi_tcp libiscsi scsi_transport_iscsi ast ttm drm_kms_helper drm > syscopyarea sysfillrect sysimgblt xfs libcrc32c ipmi_ssif joydev > input_leds intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp > coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul aesni_intel > aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd sb_edac > edac_core lpc_ich mei_me mei shpchp wmi tw5864(OE) solo6x10 > videobuf2_dma_contig videobuf2_dma_sg videobuf2_memops videobuf2_core > v4l2_common videodev media ipmi_si 8250_fintek ipmi_msghandler snd_pcm > snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device > snd_timer snd acpi_power_meter acpi_pad soundcore mac_hid parport_pc > ppdev lp parport hid_generic usbhid hid igb i2c_algo_bit ahci dca ptp > libahci megaraid_sas pps_core > Jan 13 19:35:20 cctv kernel: [34202.715105] CPU: 2 PID: 69 Comm: > khugepaged Tainted: G W OEL 4.2.0-23-generic > #28~14.04.1-Ubuntu > Jan 13 19:35:20 cctv kernel: [34202.715106] Hardware name: Supermicro > Super Server/X10SRi-F, BIOS 2.0 12/17/2015 > Jan 13 19:35:20 cctv kernel: [34202.715107] task: ffff88046d7a6040 ti: > ffff88046d0f4000 task.ti: ffff88046d0f4000 > Jan 13 19:35:20 cctv kernel: [34202.715108] RIP: > 0010:[<ffffffff810f4c49>] [<ffffffff810f4c49>] > smp_call_function_many+0x1f9/0x250 > Jan 13 19:35:20 cctv kernel: [34202.715112] RSP: 0018:ffff88046d0f7b58 > EFLAGS: 00000202 > Jan 13 19:35:20 cctv kernel: [34202.715112] RAX: 0000000000000003 RBX: > 0000000000000000 RCX: ffff88047fd1a870 > Jan 13 19:35:20 cctv kernel: [34202.715113] RDX: 0000000000000004 RSI: > 0000000000000100 RDI: ffff88047fc97788 > Jan 13 19:35:20 cctv kernel: [34202.715114] RBP: ffff88046d0f7b98 R08: > 00000000000000fb R09: 0000000000000000 > Jan 13 19:35:20 cctv kernel: [34202.715114] R10: 0000000000000004 R11: > 0000000000000000 R12: 0000000000000297 > Jan 13 19:35:20 cctv kernel: [34202.715115] R13: ffff88046d0f7b08 R14: > 0000000000000202 R15: 0000000000000202 > Jan 13 19:35:20 cctv kernel: [34202.715116] FS: > 0000000000000000(0000) GS:ffff88047fc80000(0000) > knlGS:0000000000000000 > Jan 13 19:35:20 cctv kernel: [34202.715117] CS: 0010 DS: 0000 ES: > 0000 CR0: 0000000080050033 > Jan 13 19:35:20 cctv kernel: [34202.715118] CR2: 00007fae31dc0000 CR3: > 0000000001c0d000 CR4: 00000000001406e0 > Jan 13 19:35:20 cctv kernel: [34202.715118] Stack: > Jan 13 19:35:20 cctv kernel: [34202.715119] 0000000000017740 > 01ff880400000001 0000000000000009 ffffffff81fb4ec0 > Jan 13 19:35:20 cctv kernel: [34202.715120] ffffffff8117d4c0 > 0000000000000000 0000000000000002 0000000000000100 > Jan 13 19:35:20 cctv kernel: [34202.715122] ffff88046d0f7bc8 > ffffffff810f4e49 0000000000000100 0000000000000000 > Jan 13 19:35:20 cctv kernel: [34202.715123] Call Trace: > Jan 13 19:35:20 cctv kernel: [34202.715127] [<ffffffff8117d4c0>] ? > page_alloc_cpu_notify+0x50/0x50 > Jan 13 19:35:20 cctv kernel: [34202.715128] [<ffffffff810f4e49>] > on_each_cpu_mask+0x29/0x70 > Jan 13 19:35:20 cctv kernel: [34202.715129] [<ffffffff8117b513>] > drain_all_pages+0xd3/0xf0 > Jan 13 19:35:20 cctv kernel: [34202.715131] [<ffffffff8117f391>] > __alloc_pages_nodemask+0x631/0x990 > Jan 13 19:35:20 cctv kernel: [34202.715134] [<ffffffff811d5cb0>] > khugepaged_scan_mm_slot+0x540/0xf50 > Jan 13 19:35:20 cctv kernel: [34202.715136] [<ffffffff817b9b85>] ? > schedule_timeout+0x165/0x2a0 > Jan 13 19:35:20 cctv kernel: [34202.715137] [<ffffffff811d67dd>] > khugepaged+0x11d/0x440 > Jan 13 19:35:20 cctv kernel: [34202.715139] [<ffffffff810b73f0>] ? > prepare_to_wait_event+0xf0/0xf0 > Jan 13 19:35:20 cctv kernel: [34202.715141] [<ffffffff811d66c0>] ? > khugepaged_scan_mm_slot+0xf50/0xf50 > Jan 13 19:35:20 cctv kernel: [34202.715143] [<ffffffff810951b2>] > kthread+0xd2/0xf0 > Jan 13 19:35:20 cctv kernel: [34202.715144] [<ffffffff810950e0>] ? > kthread_create_on_node+0x1c0/0x1c0 > Jan 13 19:35:20 cctv kernel: [34202.715146] [<ffffffff817baedf>] > ret_from_fork+0x3f/0x70 > Jan 13 19:35:20 cctv kernel: [34202.715147] [<ffffffff810950e0>] ? > kthread_create_on_node+0x1c0/0x1c0 > Jan 13 19:35:20 cctv kernel: [34202.715147] Code: 51 2c 00 3b 05 ad 82 > c3 00 89 c2 0f 8d 98 fe ff ff 48 98 49 8b 4d 00 48 03 0c c5 40 ae d2 > 81 8b 41 18 a8 01 74 ca f3 90 8b 41 18 <a8> 01 75 f7 eb bf 0f b6 4d c8 > 4c 89 fa 4c 89 f6 44 89 ef e8 7f > > > > # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -d /dev/video6 > Driver Info: > Driver name : tw5864 > Card type : TW5864 Encoder 2 > Bus info : PCI:0000:06:05.0 > Driver version: 4.4.0 > Capabilities : 0x85200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x05200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > > Compliance test for device /dev/video6 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Test input 0: > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 11 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > fail: v4l2-test-buffers.cpp(386): node->s_std(std) > fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node) > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL > test VIDIOC_EXPBUF: OK (Not Supported) > > Test input 0: > > > Total: 42, Succeeded: 41, Failed: 1, Warnings: 0 > [ERR] > 01:58:05root@localhost /usr/local/src/linux > # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -s -d /dev/video6 > Driver Info: > Driver name : tw5864 > Card type : TW5864 Encoder 2 > Bus info : PCI:0000:06:05.0 > Driver version: 4.4.0 > Capabilities : 0x85200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x05200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > > Compliance test for device /dev/video6 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Test input 0: > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 11 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > fail: v4l2-test-buffers.cpp(386): node->s_std(std) > fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node) > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL > test VIDIOC_EXPBUF: OK (Not Supported) > > Test input 0: > > Streaming ioctls: > test read/write: OK > fail: v4l2-test-buffers.cpp(959): ret != EINVAL > test MMAP: FAIL > fail: v4l2-test-buffers.cpp(1043): buf.qbuf(node) > fail: v4l2-test-buffers.cpp(1087): setupUserPtr(node, q) > test USERPTR: FAIL > test DMABUF: Cannot test, specify --expbuf-device > > > Total: 45, Succeeded: 42, Failed: 3, Warnings: 0 > [ERR] > 01:58:11root@localhost /usr/local/src/linux > # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -s > --expbuf-device=/dev/video6 -d /dev/video6 > Driver Info: > Driver name : tw5864 > Card type : TW5864 Encoder 2 > Bus info : PCI:0000:06:05.0 > Driver version: 4.4.0 > Capabilities : 0x85200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x05200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > > Compliance test for device /dev/video6 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Test input 0: > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 11 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > fail: v4l2-test-buffers.cpp(386): node->s_std(std) > fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node) > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL > test VIDIOC_EXPBUF: OK (Not Supported) > > Test input 0: > > Streaming ioctls: > test read/write: OK > fail: v4l2-test-buffers.cpp(959): ret != EINVAL > test MMAP: FAIL > fail: v4l2-test-buffers.cpp(1043): buf.qbuf(node) > fail: v4l2-test-buffers.cpp(1087): setupUserPtr(node, q) > test USERPTR: FAIL > fail: v4l2-test-buffers.cpp(1111): > exp_q.reqbufs(expbuf_node, q.g_buffers()) > fail: v4l2-test-buffers.cpp(1200): > setupDmaBuf(expbuf_node, node, q, exp_q) > test DMABUF: FAIL > > > Total: 46, Succeeded: 42, Failed: 4, Warnings: 0 > [ERR] > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
