The driver writes a couple of literal values to the counter
control/status register, 0x8000 to reset the counter, and 0x4000 to load
the counter from preload register 0. Add a bunch of macros to define
these values and other values for the register, based on the Sensoray
526 manual.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/s526.c | 41 +++++++++++++++++++++++++++++++----
1 file changed, 37 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index a8165df..c80527d 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -139,7 +139,36 @@
#define S526_GPCT_MODE_PR_SELECT_MASK S526_GPCT_MODE_PR_SELECT(0x1)
#define S526_GPCT_MODE_PR_SELECT_PR0 S526_GPCT_MODE_PR_SELECT(0)
#define S526_GPCT_MODE_PR_SELECT_PR1 S526_GPCT_MODE_PR_SELECT(1)
+/* Control/Status - R = readable, W = writeable, C = write 1 to clear */
#define S526_GPCT_CTRL_REG(x) (0x18 + ((x) * 8))
+#define S526_GPCT_CTRL_EV_STATUS(x) ((x) << 0) /* RC */
+#define S526_GPCT_CTRL_EV_STATUS_MASK S526_GPCT_EV_STATUS(0xf)
+#define S526_GPCT_CTRL_EV_STATUS_NONE S526_GPCT_EV_STATUS(0)
+/* these 4 bits can be OR'ed */
+#define S526_GPCT_CTRL_EV_STATUS_ECAP S526_GPCT_EV_STATUS(0x1)
+#define S526_GPCT_CTRL_EV_STATUS_ICAPN S526_GPCT_EV_STATUS(0x2)
+#define S526_GPCT_CTRL_EV_STATUS_ICAPP S526_GPCT_EV_STATUS(0x4)
+#define S526_GPCT_CTRL_EV_STATUS_RCAP S526_GPCT_EV_STATUS(0x8)
+#define S526_GPCT_CTRL_COUT_STATUS BIT(4) /* R */
+#define S526_GPCT_CTRL_INDEX_STATUS BIT(5) /* R */
+#define S525_GPCT_CTRL_INTEN(x) ((x) << 6) /* W */
+#define S525_GPCT_CTRL_INTEN_MASK S526_GPCT_CTRL_INTEN(0xf)
+#define S525_GPCT_CTRL_INTEN_NONE S526_GPCT_CTRL_INTEN(0)
+/* these 4 bits can be OR'ed */
+#define S525_GPCT_CTRL_INTEN_ERROR S526_GPCT_CTRL_INTEN(0x1)
+#define S525_GPCT_CTRL_INTEN_IXFALL S526_GPCT_CTRL_INTEN(0x2)
+#define S525_GPCT_CTRL_INTEN_IXRISE S526_GPCT_CTRL_INTEN(0x4)
+#define S525_GPCT_CTRL_INTEN_RO S526_GPCT_CTRL_INTEN(0x8)
+#define S525_GPCT_CTRL_LATCH_SEL(x) ((x) << 10) /* W */
+#define S525_GPCT_CTRL_LATCH_SEL_MASK S526_GPCT_CTRL_LATCH_SEL(0x7)
+#define S525_GPCT_CTRL_LATCH_SEL_NONE S526_GPCT_CTRL_LATCH_SEL(0)
+/* these 3 bits can be OR'ed */
+#define S525_GPCT_CTRL_LATCH_SEL_IXFALL S526_GPCT_CTRL_LATCH_SEL(0x1)
+#define S525_GPCT_CTRL_LATCH_SEL_IXRISE S526_GPCT_CTRL_LATCH_SEL(0x2)
+#define S525_GPCT_CTRL_LATCH_SEL_ITIMER S526_GPCT_CTRL_LATCH_SEL(0x4)
+#define S525_GPCT_CTRL_CT_ARM BIT(13) /* W */
+#define S525_GPCT_CTRL_CT_LOAD BIT(14) /* W */
+#define S526_GPCT_CTRL_CT_RESET BIT(15) /* W */
#define S526_EEPROM_DATA_REG 0x32
#define S526_EEPROM_CTRL_REG 0x34
#define S526_EEPROM_CTRL_ADDR(x) (((x) & 0x3f) << 3)
@@ -218,10 +247,12 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
if ((val & S526_GPCT_MODE_AUTOLOAD_MASK) ==
S526_GPCT_MODE_AUTOLOAD_NONE) {
/* Reset the counter */
- outw(0x8000, dev->iobase + S526_GPCT_CTRL_REG(chan));
+ outw(S526_GPCT_CTRL_CT_RESET,
+ dev->iobase + S526_GPCT_CTRL_REG(chan));
/*
* Load the counter from PR0
- * outw(0x4000, dev->iobase + S526_GPCT_CTRL_REG(chan));
+ * outw(S526_GPCT_CTRL_CT_LOAD,
+ * dev->iobase + S526_GPCT_CTRL_REG(chan));
*/
}
#else
@@ -265,9 +296,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
if ((val & S526_GPCT_MODE_AUTOLOAD_MASK) ==
S526_GPCT_MODE_AUTOLOAD_NONE) {
/* Reset the counter */
- outw(0x8000, dev->iobase + S526_GPCT_CTRL_REG(chan));
+ outw(S526_GPCT_CTRL_CT_RESET,
+ dev->iobase + S526_GPCT_CTRL_REG(chan));
/* Load the counter from PR0 */
- outw(0x4000, dev->iobase + S526_GPCT_CTRL_REG(chan));
+ outw(S526_GPCT_CTRL_CT_LOAD,
+ dev->iobase + S526_GPCT_CTRL_REG(chan));
}
#endif
break;
--
2.6.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
