Re: [PATCH 06/10] mfd: rtsx: update phy register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 19 Jan 2015, 敬锐 wrote:
> On 01/18/2015 08:29 PM, Lee Jones wrote:
> > On Thu, 15 Jan 2015, micky_ching@xxxxxxxxxxxxxx wrote:
> >
> >> From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> >>
> >> update phy register value and using direct value instead of macros.
> >> It is much easier to debug using constant value than a lot of macros.
> >> We usually need compare the value directly to check the configure.
> > NACK.  This is the opposite of what I would like to see.
> >
> When we debug, we usually need to compare the value provided from hardware,
> of course we can compare by print them to kernel log. but I think it more
> convenient from source code. And we only set phy register when 
> initialize chip,
> so the value will not scattered everywhere, we will not benefit from macros.
> 
> if we want to know the meaning of setting, we can look at the register 
> define.

This is not acceptable and is the complete opposite of what we're
trying to achieve.  I promote readability (by humans) as one of the
highest priorities when writing code.  0xFE6C is far from readable.

> >> Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> >> ---
> >>   drivers/mfd/rts5249.c | 46 ++++++++++++++--------------------------------
> >>   1 file changed, 14 insertions(+), 32 deletions(-)
> >>
> >> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> >> index 2fe2854..00208d1 100644
> >> --- a/drivers/mfd/rts5249.c
> >> +++ b/drivers/mfd/rts5249.c
> >> @@ -132,57 +132,39 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
> >>   	if (err < 0)
> >>   		return err;
> >>   
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
> >> -			PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
> >> -			PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
> >> -			PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
> >> -			PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x19, 0xFE6C);
> >>   	if (err < 0)
> >>   		return err;
> >>   
> >>   	msleep(1);
> >>   
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
> >> -			PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
> >> -			PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x0A, 0x05C0);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
> >> -			PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> >> -			PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
> >> -			PHY_PCR_RSSI_EN);
> >> +
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x00, 0xBA43);
> >> +	if (err < 0)
> >> +		return err;
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x03, 0xC152);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
> >> -			PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
> >> -			PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
> >> -			PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
> >> -			PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x1E, 0x78EB);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
> >> -			PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
> >> -			PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
> >> -			PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
> >> -			PHY_FLD4_BER_CHK_EN);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x05, 0x4600);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x02, 0x041F);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
> >> -			PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x1D, 0x0824);
> >>   	if (err < 0)
> >>   		return err;
> >> -	err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
> >> -			PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
> >> -			PHY_FLD3_RXDELINK);
> >> +	err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FE4);
> >>   	if (err < 0)
> >>   		return err;
> >> -	return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
> >> -			PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
> >> -			PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
> >> -			PHY_TUNE_TUNED12);
> >> +
> >> +	return 0;
> >>   }
> >>   
> >>   static int rts5249_turn_on_led(struct rtsx_pcr *pcr)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux