On 01/18/2015 08:39 PM, Lee Jones wrote: > On Thu, 15 Jan 2015, micky_ching@xxxxxxxxxxxxxx wrote: > >> From: Micky Ching <micky_ching@xxxxxxxxxxxxxx> >> >> Re-format coding-style, using uniform SPC after "#define" keyword >> instead of mixing using TAB and SPC. > Tabs and spaces in this context usually have different meanings > i.e. space after #define usually denotes that the following define is > a register address, whereas a tab commonly describes a bit field. > > Please ensure you're not messing with these conventions. By the looks > of it you are not, but I need you to confirm that you know what you're > doing. if using TAB describe a bit field, and define TAB length = 8 SPC, the editor will not show any difference(if not highlight TAB/SPC). And the mix is not to show difference between address and field. so all replaced by space, and show difference by next patch(02/10). >> Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx> >> --- >> include/linux/mfd/rtsx_pci.h | 254 +++++++++++++++++++++---------------------- >> 1 file changed, 127 insertions(+), 127 deletions(-) >> >> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h >> index 0c12628..a9c2a14 100644 >> --- a/include/linux/mfd/rtsx_pci.h >> +++ b/include/linux/mfd/rtsx_pci.h >> @@ -175,9 +175,9 @@ >> /* CARD_SHARE_MODE */ >> #define CARD_SHARE_MASK 0x0F >> #define CARD_SHARE_MULTI_LUN 0x00 >> -#define CARD_SHARE_NORMAL 0x00 >> -#define CARD_SHARE_48_SD 0x04 >> -#define CARD_SHARE_48_MS 0x08 >> +#define CARD_SHARE_NORMAL 0x00 >> +#define CARD_SHARE_48_SD 0x04 >> +#define CARD_SHARE_48_MS 0x08 >> /* CARD_SHARE_MODE for barossa */ >> #define CARD_SHARE_BAROSSA_SD 0x01 >> #define CARD_SHARE_BAROSSA_MS 0x02 >> @@ -249,76 +249,76 @@ >> #define CD_AUTO_DISABLE 0x40 >> >> /* SD_STAT1 */ >> -#define SD_CRC7_ERR 0x80 >> -#define SD_CRC16_ERR 0x40 >> -#define SD_CRC_WRITE_ERR 0x20 >> -#define SD_CRC_WRITE_ERR_MASK 0x1C >> -#define GET_CRC_TIME_OUT 0x02 >> -#define SD_TUNING_COMPARE_ERR 0x01 >> +#define SD_CRC7_ERR 0x80 >> +#define SD_CRC16_ERR 0x40 >> +#define SD_CRC_WRITE_ERR 0x20 >> +#define SD_CRC_WRITE_ERR_MASK 0x1C >> +#define GET_CRC_TIME_OUT 0x02 >> +#define SD_TUNING_COMPARE_ERR 0x01 >> >> /* SD_STAT2 */ >> -#define SD_RSP_80CLK_TIMEOUT 0x01 >> +#define SD_RSP_80CLK_TIMEOUT 0x01 >> >> /* SD_BUS_STAT */ >> -#define SD_CLK_TOGGLE_EN 0x80 >> -#define SD_CLK_FORCE_STOP 0x40 >> -#define SD_DAT3_STATUS 0x10 >> -#define SD_DAT2_STATUS 0x08 >> -#define SD_DAT1_STATUS 0x04 >> -#define SD_DAT0_STATUS 0x02 >> -#define SD_CMD_STATUS 0x01 >> +#define SD_CLK_TOGGLE_EN 0x80 >> +#define SD_CLK_FORCE_STOP 0x40 >> +#define SD_DAT3_STATUS 0x10 >> +#define SD_DAT2_STATUS 0x08 >> +#define SD_DAT1_STATUS 0x04 >> +#define SD_DAT0_STATUS 0x02 >> +#define SD_CMD_STATUS 0x01 >> >> /* SD_PAD_CTL */ >> -#define SD_IO_USING_1V8 0x80 >> -#define SD_IO_USING_3V3 0x7F >> -#define TYPE_A_DRIVING 0x00 >> -#define TYPE_B_DRIVING 0x01 >> -#define TYPE_C_DRIVING 0x02 >> -#define TYPE_D_DRIVING 0x03 >> +#define SD_IO_USING_1V8 0x80 >> +#define SD_IO_USING_3V3 0x7F >> +#define TYPE_A_DRIVING 0x00 >> +#define TYPE_B_DRIVING 0x01 >> +#define TYPE_C_DRIVING 0x02 >> +#define TYPE_D_DRIVING 0x03 >> >> /* SD_SAMPLE_POINT_CTL */ >> -#define DDR_FIX_RX_DAT 0x00 >> -#define DDR_VAR_RX_DAT 0x80 >> -#define DDR_FIX_RX_DAT_EDGE 0x00 >> -#define DDR_FIX_RX_DAT_14_DELAY 0x40 >> -#define DDR_FIX_RX_CMD 0x00 >> -#define DDR_VAR_RX_CMD 0x20 >> -#define DDR_FIX_RX_CMD_POS_EDGE 0x00 >> -#define DDR_FIX_RX_CMD_14_DELAY 0x10 >> -#define SD20_RX_POS_EDGE 0x00 >> -#define SD20_RX_14_DELAY 0x08 >> +#define DDR_FIX_RX_DAT 0x00 >> +#define DDR_VAR_RX_DAT 0x80 >> +#define DDR_FIX_RX_DAT_EDGE 0x00 >> +#define DDR_FIX_RX_DAT_14_DELAY 0x40 >> +#define DDR_FIX_RX_CMD 0x00 >> +#define DDR_VAR_RX_CMD 0x20 >> +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 >> +#define DDR_FIX_RX_CMD_14_DELAY 0x10 >> +#define SD20_RX_POS_EDGE 0x00 >> +#define SD20_RX_14_DELAY 0x08 >> #define SD20_RX_SEL_MASK 0x08 >> >> /* SD_PUSH_POINT_CTL */ >> -#define DDR_FIX_TX_CMD_DAT 0x00 >> -#define DDR_VAR_TX_CMD_DAT 0x80 >> -#define DDR_FIX_TX_DAT_14_TSU 0x00 >> -#define DDR_FIX_TX_DAT_12_TSU 0x40 >> -#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 >> -#define DDR_FIX_TX_CMD_14_AHEAD 0x20 >> -#define SD20_TX_NEG_EDGE 0x00 >> -#define SD20_TX_14_AHEAD 0x10 >> +#define DDR_FIX_TX_CMD_DAT 0x00 >> +#define DDR_VAR_TX_CMD_DAT 0x80 >> +#define DDR_FIX_TX_DAT_14_TSU 0x00 >> +#define DDR_FIX_TX_DAT_12_TSU 0x40 >> +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 >> +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 >> +#define SD20_TX_NEG_EDGE 0x00 >> +#define SD20_TX_14_AHEAD 0x10 >> #define SD20_TX_SEL_MASK 0x10 >> -#define DDR_VAR_SDCLK_POL_SWAP 0x01 >> +#define DDR_VAR_SDCLK_POL_SWAP 0x01 >> >> /* SD_TRANSFER */ >> -#define SD_TRANSFER_START 0x80 >> -#define SD_TRANSFER_END 0x40 >> +#define SD_TRANSFER_START 0x80 >> +#define SD_TRANSFER_END 0x40 >> #define SD_STAT_IDLE 0x20 >> -#define SD_TRANSFER_ERR 0x10 >> +#define SD_TRANSFER_ERR 0x10 >> /* SD Transfer Mode definition */ >> -#define SD_TM_NORMAL_WRITE 0x00 >> -#define SD_TM_AUTO_WRITE_3 0x01 >> -#define SD_TM_AUTO_WRITE_4 0x02 >> -#define SD_TM_AUTO_READ_3 0x05 >> -#define SD_TM_AUTO_READ_4 0x06 >> -#define SD_TM_CMD_RSP 0x08 >> -#define SD_TM_AUTO_WRITE_1 0x09 >> -#define SD_TM_AUTO_WRITE_2 0x0A >> -#define SD_TM_NORMAL_READ 0x0C >> -#define SD_TM_AUTO_READ_1 0x0D >> -#define SD_TM_AUTO_READ_2 0x0E >> -#define SD_TM_AUTO_TUNING 0x0F >> +#define SD_TM_NORMAL_WRITE 0x00 >> +#define SD_TM_AUTO_WRITE_3 0x01 >> +#define SD_TM_AUTO_WRITE_4 0x02 >> +#define SD_TM_AUTO_READ_3 0x05 >> +#define SD_TM_AUTO_READ_4 0x06 >> +#define SD_TM_CMD_RSP 0x08 >> +#define SD_TM_AUTO_WRITE_1 0x09 >> +#define SD_TM_AUTO_WRITE_2 0x0A >> +#define SD_TM_NORMAL_READ 0x0C >> +#define SD_TM_AUTO_READ_1 0x0D >> +#define SD_TM_AUTO_READ_2 0x0E >> +#define SD_TM_AUTO_TUNING 0x0F >> >> /* SD_VPTX_CTL / SD_VPRX_CTL */ >> #define PHASE_CHANGE 0x80 >> @@ -332,15 +332,15 @@ >> >> /* SD Configure 1 Register */ >> #define SD_CLK_DIVIDE_0 0x00 >> -#define SD_CLK_DIVIDE_256 0xC0 >> -#define SD_CLK_DIVIDE_128 0x80 >> -#define SD_BUS_WIDTH_1BIT 0x00 >> -#define SD_BUS_WIDTH_4BIT 0x01 >> -#define SD_BUS_WIDTH_8BIT 0x02 >> -#define SD_ASYNC_FIFO_NOT_RST 0x10 >> -#define SD_20_MODE 0x00 >> -#define SD_DDR_MODE 0x04 >> -#define SD_30_MODE 0x08 >> +#define SD_CLK_DIVIDE_256 0xC0 >> +#define SD_CLK_DIVIDE_128 0x80 >> +#define SD_BUS_WIDTH_1BIT 0x00 >> +#define SD_BUS_WIDTH_4BIT 0x01 >> +#define SD_BUS_WIDTH_8BIT 0x02 >> +#define SD_ASYNC_FIFO_NOT_RST 0x10 >> +#define SD_20_MODE 0x00 >> +#define SD_DDR_MODE 0x04 >> +#define SD_30_MODE 0x08 >> >> #define SD_CLK_DIVIDE_MASK 0xC0 >> >> @@ -415,71 +415,71 @@ >> #define CLK_DIV_8 0x04 >> >> /* MS_CFG */ >> -#define SAMPLE_TIME_RISING 0x00 >> -#define SAMPLE_TIME_FALLING 0x80 >> -#define PUSH_TIME_DEFAULT 0x00 >> -#define PUSH_TIME_ODD 0x40 >> -#define NO_EXTEND_TOGGLE 0x00 >> -#define EXTEND_TOGGLE_CHK 0x20 >> -#define MS_BUS_WIDTH_1 0x00 >> -#define MS_BUS_WIDTH_4 0x10 >> -#define MS_BUS_WIDTH_8 0x18 >> -#define MS_2K_SECTOR_MODE 0x04 >> -#define MS_512_SECTOR_MODE 0x00 >> -#define MS_TOGGLE_TIMEOUT_EN 0x00 >> -#define MS_TOGGLE_TIMEOUT_DISEN 0x01 >> +#define SAMPLE_TIME_RISING 0x00 >> +#define SAMPLE_TIME_FALLING 0x80 >> +#define PUSH_TIME_DEFAULT 0x00 >> +#define PUSH_TIME_ODD 0x40 >> +#define NO_EXTEND_TOGGLE 0x00 >> +#define EXTEND_TOGGLE_CHK 0x20 >> +#define MS_BUS_WIDTH_1 0x00 >> +#define MS_BUS_WIDTH_4 0x10 >> +#define MS_BUS_WIDTH_8 0x18 >> +#define MS_2K_SECTOR_MODE 0x04 >> +#define MS_512_SECTOR_MODE 0x00 >> +#define MS_TOGGLE_TIMEOUT_EN 0x00 >> +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 >> #define MS_NO_CHECK_INT 0x02 >> >> /* MS_TRANS_CFG */ >> -#define WAIT_INT 0x80 >> -#define NO_WAIT_INT 0x00 >> -#define NO_AUTO_READ_INT_REG 0x00 >> -#define AUTO_READ_INT_REG 0x40 >> -#define MS_CRC16_ERR 0x20 >> -#define MS_RDY_TIMEOUT 0x10 >> -#define MS_INT_CMDNK 0x08 >> -#define MS_INT_BREQ 0x04 >> -#define MS_INT_ERR 0x02 >> -#define MS_INT_CED 0x01 >> +#define WAIT_INT 0x80 >> +#define NO_WAIT_INT 0x00 >> +#define NO_AUTO_READ_INT_REG 0x00 >> +#define AUTO_READ_INT_REG 0x40 >> +#define MS_CRC16_ERR 0x20 >> +#define MS_RDY_TIMEOUT 0x10 >> +#define MS_INT_CMDNK 0x08 >> +#define MS_INT_BREQ 0x04 >> +#define MS_INT_ERR 0x02 >> +#define MS_INT_CED 0x01 >> >> /* MS_TRANSFER */ >> -#define MS_TRANSFER_START 0x80 >> -#define MS_TRANSFER_END 0x40 >> -#define MS_TRANSFER_ERR 0x20 >> -#define MS_BS_STATE 0x10 >> -#define MS_TM_READ_BYTES 0x00 >> -#define MS_TM_NORMAL_READ 0x01 >> -#define MS_TM_WRITE_BYTES 0x04 >> -#define MS_TM_NORMAL_WRITE 0x05 >> -#define MS_TM_AUTO_READ 0x08 >> -#define MS_TM_AUTO_WRITE 0x0C >> +#define MS_TRANSFER_START 0x80 >> +#define MS_TRANSFER_END 0x40 >> +#define MS_TRANSFER_ERR 0x20 >> +#define MS_BS_STATE 0x10 >> +#define MS_TM_READ_BYTES 0x00 >> +#define MS_TM_NORMAL_READ 0x01 >> +#define MS_TM_WRITE_BYTES 0x04 >> +#define MS_TM_NORMAL_WRITE 0x05 >> +#define MS_TM_AUTO_READ 0x08 >> +#define MS_TM_AUTO_WRITE 0x0C >> >> /* SD Configure 2 Register */ >> -#define SD_CALCULATE_CRC7 0x00 >> -#define SD_NO_CALCULATE_CRC7 0x80 >> -#define SD_CHECK_CRC16 0x00 >> -#define SD_NO_CHECK_CRC16 0x40 >> +#define SD_CALCULATE_CRC7 0x00 >> +#define SD_NO_CALCULATE_CRC7 0x80 >> +#define SD_CHECK_CRC16 0x00 >> +#define SD_NO_CHECK_CRC16 0x40 >> #define SD_NO_CHECK_WAIT_CRC_TO 0x20 >> -#define SD_WAIT_BUSY_END 0x08 >> -#define SD_NO_WAIT_BUSY_END 0x00 >> -#define SD_CHECK_CRC7 0x00 >> -#define SD_NO_CHECK_CRC7 0x04 >> -#define SD_RSP_LEN_0 0x00 >> -#define SD_RSP_LEN_6 0x01 >> -#define SD_RSP_LEN_17 0x02 >> +#define SD_WAIT_BUSY_END 0x08 >> +#define SD_NO_WAIT_BUSY_END 0x00 >> +#define SD_CHECK_CRC7 0x00 >> +#define SD_NO_CHECK_CRC7 0x04 >> +#define SD_RSP_LEN_0 0x00 >> +#define SD_RSP_LEN_6 0x01 >> +#define SD_RSP_LEN_17 0x02 >> /* SD/MMC Response Type Definition */ >> -#define SD_RSP_TYPE_R0 0x04 >> -#define SD_RSP_TYPE_R1 0x01 >> -#define SD_RSP_TYPE_R1b 0x09 >> -#define SD_RSP_TYPE_R2 0x02 >> -#define SD_RSP_TYPE_R3 0x05 >> -#define SD_RSP_TYPE_R4 0x05 >> -#define SD_RSP_TYPE_R5 0x01 >> -#define SD_RSP_TYPE_R6 0x01 >> -#define SD_RSP_TYPE_R7 0x01 >> +#define SD_RSP_TYPE_R0 0x04 >> +#define SD_RSP_TYPE_R1 0x01 >> +#define SD_RSP_TYPE_R1b 0x09 >> +#define SD_RSP_TYPE_R2 0x02 >> +#define SD_RSP_TYPE_R3 0x05 >> +#define SD_RSP_TYPE_R4 0x05 >> +#define SD_RSP_TYPE_R5 0x01 >> +#define SD_RSP_TYPE_R6 0x01 >> +#define SD_RSP_TYPE_R7 0x01 >> >> /* SD_CONFIGURE3 */ >> -#define SD_RSP_80CLK_TIMEOUT_EN 0x01 >> +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 >> >> /* Card Transfer Reset Register */ >> #define SPI_STOP 0x01 >> @@ -574,13 +574,13 @@ >> >> #define SRCTL 0xFC13 >> >> -#define DCM_DRP_CTL 0xFC23 >> -#define DCM_DRP_TRIG 0xFC24 >> -#define DCM_DRP_CFG 0xFC25 >> -#define DCM_DRP_WR_DATA_L 0xFC26 >> -#define DCM_DRP_WR_DATA_H 0xFC27 >> -#define DCM_DRP_RD_DATA_L 0xFC28 >> -#define DCM_DRP_RD_DATA_H 0xFC29 >> +#define DCM_DRP_CTL 0xFC23 >> +#define DCM_DRP_TRIG 0xFC24 >> +#define DCM_DRP_CFG 0xFC25 >> +#define DCM_DRP_WR_DATA_L 0xFC26 >> +#define DCM_DRP_WR_DATA_H 0xFC27 >> +#define DCM_DRP_RD_DATA_L 0xFC28 >> +#define DCM_DRP_RD_DATA_H 0xFC29 >> #define SD_VPCLK0_CTL 0xFC2A >> #define SD_VPCLK1_CTL 0xFC2B >> #define SD_DCMPS0_CTL 0xFC2C _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel