[PATCH 2/3] Staging: comedi: addi-data: cleanup conditional blocks in hwdrv_apci035.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There were some conditional blocks that had an unneccesary level of
indentation in them.  We can remove this to improve code clarity.

Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
---
 .../comedi/drivers/addi-data/hwdrv_apci035.c       | 31 ++++++++++------------
 1 file changed, 14 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index 7c40535..34e5321 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -207,23 +207,22 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
 		ui_Command =
 			(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
 
-	} else {
-		if (data[0] == ADDIDATA_WATCHDOG) {
+	} else if (data[0] == ADDIDATA_WATCHDOG) {
 
-			/* Set the mode :             */
-			/* - Disable the hardware     */
-			/* - Disable the counter mode */
-			/* - Disable the warning      */
-			/* - Disable the reset        */
-			/* - Disable the timer mode   */
+		/* Set the mode :             */
+		/* - Disable the hardware     */
+		/* - Disable the counter mode */
+		/* - Disable the warning      */
+		/* - Disable the reset        */
+		/* - Disable the timer mode   */
 
-			ui_Command = ui_Command & 0xFFF819E2UL;
+		ui_Command = ui_Command & 0xFFF819E2UL;
 
-		} else {
-			dev_err(dev->class_dev, "The parameter for Timer/watchdog selection is in error\n");
-			return -EINVAL;
-		}
+	} else {
+		dev_err(dev->class_dev, "The parameter for Timer/watchdog selection is in error\n");
+		return -EINVAL;
 	}
+
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -628,10 +627,8 @@ static void v_APCI035_Interrupt(int irq, void *d)
 		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 	}
 
-	else {
-		if ((ui_StatusRegister2 & 0x1) == 0x1)
-			send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
-	}
+	else if ((ui_StatusRegister2 & 0x1) == 0x1)
+		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 
 	return;
 }
-- 
1.8.5.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux