The comedi subsystem only requires the drivers to support interrupts if one or more of the subdevices support async commands. Since this is optional: 1) don't fail the attach if the irq is not available 2) only hookup the async command support if the irq is available 3) remove any async command init from subdevices that don't need it 4) remove any unnecessary sanity checks in the async command functions Make use of the comedi_device 'read_subdev' and 'write_subdev' pointers instead of accessing the dev->subdevices array directly with "magic" numbers to the correct subdevice. Also, remove any unnecessary debug noise associated with the irq requests. H Hartley Sweeten (51): staging: comedi: s626: fix async command hookup staging: comedi: pcl816: remove 'irq_free' from private data staging: comedi: pcl816: only init command support if irq is available staging: comedi: pcl816: remove 'sub_ai' from private data staging: comedi: pcl816: use dev->read_subdev staging: comedi: pcl818: remove 'irq_free' from private data staging: comedi: pcl818: remove unnecessary 'dev->irq' tests staging: comedi: pcl818: remove function trace noise staging: comedi: pcl818: only init async command members when needed staging: comedi: pcl818: remove 'sub_ai' from private data staging: comedi: pcl818: use dev->read_subdev staging: comedi: pcl818: remove unnecessary s->len_chanlist init staging: comedi: pcl812: remove unnecessary s->len_chanlist init staging: comedi: pcl812: only init async command members when needed staging: comedi: pcl812: use dev->read_subdev staging: comedi: ni_pcimio: tidy up the irq request staging: comedi: ni_pcidio: tidy up the irq request staging: comedi: ni_at_a2150: tidy up the irq request staging: comedi: me4000: refactor request_irq() during attach staging: comedi: me4000: use dev->read_subdev staging: comedi: me4000: remove unnecessary check in the irq handler staging: comedi: das1800: tidy up irq request staging: comedi: das1800: only init command support if irq is available staging: comedi: das1800: remove unnecessary 'dev->irq' test staging: comedi: das1800: use dev->read_subdev staging: comedi: das16m1: remove unnecessary 'dev->irq' test staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq() staging: comedi: adl_pci9111: the irq is only needed for async command support staging: comedi: adl_pci9111: remove unnecessary 'dev->irq' test staging: comedi: dt2814: use dev->read_subdev staging: comedi: dt282x: use dev->read_subdev staging: comedi: dt282x: use dev->write_subdev staging: comedi: amplc_pci230: tidy up irq request staging: comedi: adl_pci9118: tidy up irq request staging: comedi: adv_pci1710: only init async command members when needed staging: comedi: adv_pci1710: use dev->read_subdev staging: comedi: dt3000: don't fail attach if irq is not available staging: comedi: dt3000: use dev->read_subdev staging: comedi: s626: use dev->read_subdev staging: comedi: hwrdv_apci3120: use dev->read_subdev staging: comedi: hwrdv_apci3200: use dev->read_subdev staging: comedi: adl_pci9118: use dev->read_subdev staging: comedi: amplc_pc236: use dev->read_subdev staging: comedi: amplc_pci224: use dev->write_subdev staging: comedi: ni_65xx: use dev->read_subdev staging: comedi: ni_atmio16d: use dev->read_subdev staging: comedi: rtd520: use dev->read_subdev staging: comedi: ni_pcidio: factor board reset out of attach staging: comedi: ni_pcidio: request_irq() before seting up subdevices staging: comedi: ni_pcidio: use dev->read_subdev staging: comedi: multiq3: pass subdevice to encoder_reset() .../comedi/drivers/addi-data/hwdrv_apci3120.c | 6 +- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +- drivers/staging/comedi/drivers/adl_pci9111.c | 31 ++++---- drivers/staging/comedi/drivers/adl_pci9118.c | 45 +++++------ drivers/staging/comedi/drivers/adv_pci1710.c | 10 +-- drivers/staging/comedi/drivers/amplc_pc236.c | 2 +- drivers/staging/comedi/drivers/amplc_pci224.c | 2 +- drivers/staging/comedi/drivers/amplc_pci230.c | 27 +++---- drivers/staging/comedi/drivers/das16m1.c | 5 -- drivers/staging/comedi/drivers/das1800.c | 89 +++++++++------------- drivers/staging/comedi/drivers/dt2814.c | 4 +- drivers/staging/comedi/drivers/dt282x.c | 10 +-- drivers/staging/comedi/drivers/dt3000.c | 29 +++---- drivers/staging/comedi/drivers/me4000.c | 37 ++++----- drivers/staging/comedi/drivers/multiq3.c | 6 +- drivers/staging/comedi/drivers/ni_65xx.c | 2 +- drivers/staging/comedi/drivers/ni_at_a2150.c | 45 +++++------ drivers/staging/comedi/drivers/ni_atmio16d.c | 2 +- drivers/staging/comedi/drivers/ni_pcidio.c | 66 ++++++++-------- drivers/staging/comedi/drivers/ni_pcimio.c | 19 ++--- drivers/staging/comedi/drivers/pcl812.c | 11 +-- drivers/staging/comedi/drivers/pcl816.c | 36 ++++----- drivers/staging/comedi/drivers/pcl818.c | 41 +++------- drivers/staging/comedi/drivers/rtd520.c | 2 +- drivers/staging/comedi/drivers/s626.c | 17 ++--- 25 files changed, 234 insertions(+), 312 deletions(-) -- 1.8.4.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel