Remove the "comedi%d:" prefix from the dev_{level} messages. This previx
will already be displayed.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/unioxx5.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index d6b75d6..adf7cb7 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -146,8 +146,8 @@ static int __unioxx5_digital_read(struct comedi_subdevice *s,
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
dev_err(csdev,
- "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
- minor, channel);
+ "undefined channel %d. channel range is 0 .. 23\n",
+ channel);
return 0;
}
@@ -174,8 +174,9 @@ static int __unioxx5_analog_read(struct comedi_subdevice *s,
/* defining if given module can work on input */
if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) {
- dev_err(csdev, "comedi%d: module in position %d with id 0x%02x is for output only",
- minor, module_no, usp->usp_module_type[module_no]);
+ dev_err(csdev,
+ "module in position %d with id 0x%02x is for output only",
+ module_no, usp->usp_module_type[module_no]);
return 0;
}
@@ -191,8 +192,7 @@ static int __unioxx5_analog_read(struct comedi_subdevice *s,
/* if four bytes readding error occurs - return 0(false) */
if ((control & Rx4CA_ERR_MASK)) {
- dev_err(csdev,
- "comedi%d: 4 bytes error\n", minor);
+ dev_err(csdev, "4 bytes error\n");
return 0;
}
@@ -214,8 +214,9 @@ static int __unioxx5_digital_write(struct comedi_subdevice *s,
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
- dev_err(csdev, "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
- minor, channel);
+ dev_err(csdev,
+ "undefined channel %d. channel range is 0 .. 23\n",
+ channel);
return 0;
}
@@ -246,8 +247,9 @@ static int __unioxx5_analog_write(struct comedi_subdevice *s,
/* defining if given module can work on output */
if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) {
- dev_err(csdev, "comedi%d: module in position %d with id 0x%0x is for input only!\n",
- minor, module, usp->usp_module_type[module]);
+ dev_err(csdev,
+ "module in position %d with id 0x%0x is for input only!\n",
+ module, usp->usp_module_type[module]);
return 0;
}
@@ -329,16 +331,15 @@ static int unioxx5_insn_config(struct comedi_device *dev,
if (type != MODULE_DIGITAL) {
dev_err(dev->class_dev,
- "comedi%d: channel configuration accessible only for digital modules\n",
- dev->minor);
+ "channel configuration accessible only for digital modules\n");
return -1;
}
channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
dev_err(dev->class_dev,
- "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
- dev->minor, channel);
+ "undefined channel %d. channel range is 0 .. 23\n",
+ channel);
return -1;
}
@@ -353,8 +354,7 @@ static int unioxx5_insn_config(struct comedi_device *dev,
flags |= mask;
break;
default:
- dev_err(dev->class_dev,
- "comedi%d: unknown flag\n", dev->minor);
+ dev_err(dev->class_dev, "unknown flag\n");
return -1;
}
--
1.8.4.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
