Hi Hans,
On Monday 04 November 2013 09:34:49 Hans Verkuil wrote:
> On 11/04/2013 12:28 AM, Laurent Pinchart wrote:
> > On Thursday 03 October 2013 08:54:19 Hans Verkuil wrote:
> >> On 10/03/2013 01:55 AM, Laurent Pinchart wrote:
> >>> From: Sergio Aguirre <sergio.a.aguirre@xxxxxxxxx>
> >>>
> >>> This adds a very simplistic driver to utilize the CSI2A interface inside
> >>> the ISS subsystem in OMAP4, and dump the data to memory.
> >>>
> >>> Check Documentation/video4linux/omap4_camera.txt for details.
> >>>
> >>> This commit adds video devices support.
> >>>
> >>> Signed-off-by: Sergio Aguirre <sergio.a.aguirre@xxxxxxxxx>
> >>>
> >>> [Port the driver to v3.12-rc3, including the following changes
> >>> - Don't include plat/ headers
> >>> - Don't use cpu_is_omap44xx() macro
> >>> - Don't depend on EXPERIMENTAL
> >>> - Fix s_crop operation prototype
> >>> - Update link_notify prototype
> >>> - Rename media_entity_remote_source to media_entity_remote_pad]
> >>>
> >>> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >>> ---
> >>>
> >>> drivers/staging/media/omap4iss/iss_video.c | 1129
> >>> +++++++++++++++++++++++
> >>> drivers/staging/media/omap4iss/iss_video.h | 201 +++++
> >>> 2 files changed, 1330 insertions(+)
> >>> create mode 100644 drivers/staging/media/omap4iss/iss_video.c
> >>> create mode 100644 drivers/staging/media/omap4iss/iss_video.h
> >>>
> >>> diff --git a/drivers/staging/media/omap4iss/iss_video.c
> >>> b/drivers/staging/media/omap4iss/iss_video.c new file mode 100644
> >>> index 0000000..31f1b88
> >>> --- /dev/null
> >>> +++ b/drivers/staging/media/omap4iss/iss_video.c
> >>
> >> <snip>
> >>
> >>> +/*
> >>> ---------------------------------------------------------------------
> >>> + * V4L2 ioctls
> >>> + */
> >>> +
> >>> +static int
> >>> +iss_video_querycap(struct file *file, void *fh, struct v4l2_capability
> >>> *cap) +{
> >>> + struct iss_video *video = video_drvdata(file);
> >>> +
> >>> + strlcpy(cap->driver, ISS_VIDEO_DRIVER_NAME, sizeof(cap->driver));
> >>> + strlcpy(cap->card, video->video.name, sizeof(cap->card));
> >>> + strlcpy(cap->bus_info, "media", sizeof(cap->bus_info));
> >>> +
> >>> + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
> >>> + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
> >>> + else
> >>> + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
> >>
> >> Set device_caps instead of capabilities and add:
> >> cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> >
> > Actually cap->capabilities should be V4L2_CAP_DEVICE_CAPS |
> > V4L2_CAP_STREAMING>
> > | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT. I'll fix that.
>
> You're right.
>
> >>> +
> >>> + return 0;
> >>> +}
> >
> > [snip]
> >
> >>> +static int
> >>> +iss_video_try_format(struct file *file, void *fh, struct v4l2_format
> >>> *format) +{
> >>> + struct iss_video *video = video_drvdata(file);
> >>> + struct v4l2_subdev_format fmt;
> >>> + struct v4l2_subdev *subdev;
> >>> + u32 pad;
> >>> + int ret;
> >>> +
> >>> + if (format->type != video->type)
> >>> + return -EINVAL;
> >>> +
> >>> + subdev = iss_video_remote_subdev(video, &pad);
> >>> + if (subdev == NULL)
> >>> + return -EINVAL;
> >>> +
> >>> + iss_video_pix_to_mbus(&format->fmt.pix, &fmt.format);
> >>> +
> >>> + fmt.pad = pad;
> >>> + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> >>> + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
> >>> + if (ret)
> >>> + return ret == -ENOIOCTLCMD ? -EINVAL : ret;
> >>
> >> Return ENOTTY instead of EINVAL. Even better, use v4l2_subdev_has_op() +
> >> v4l2_disable_ioctl() to just disable ioctls based on the available subdev
> >> ops in probe().
> >
> > The remote subdev is required to implement the get_fmt() operation,
> > otherwise the ISS driver can't work at all. What about adding a
> > v4l2_subdev_has_op() check at probe time and removing the check here ?
>
> That would be best, yes.
It's actually even simpler than that. The remote subdev is an internal OMAP4
ISS subdevice that is guaranteed to implement get_fmt. There's no need to
check for ENOIOCTLCMD here, and no need to verify that the subdev implements
get_fmt at probe time.
> >>> +
> >>> + iss_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix);
> >>> + return 0;
> >>> +}
> >
> > [snip]
> >
> >>> +static int
> >>> +iss_video_enum_input(struct file *file, void *fh, struct v4l2_input
> >>> *input)
> >>> +{
> >>> + if (input->index > 0)
> >>> + return -EINVAL;
> >>> +
> >>> + strlcpy(input->name, "camera", sizeof(input->name));
> >>> + input->type = V4L2_INPUT_TYPE_CAMERA;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int
> >>> +iss_video_g_input(struct file *file, void *fh, unsigned int *input)
> >>> +{
> >>> + *input = 0;
> >>> +
> >>> + return 0;
> >>> +}
> >>
> >> Also add s_input.
> >
> > Shouldn't I remove enum_input and g_input instead ?
>
> No. G/S/ENUM_INPUT ioctls are compulsory for video capture devices.
>
> One thing I would like to do at some point in time is to add a few helper
> functions for this. A lot of camera/TV drivers have just one input, so it
> would be trivial to add helpers for that. I just never got around to that.
I thought we agreed they were not for media controller-based devices that
implement the stripped-down streaming profile (which we don't have yet :-))
only ?
--
Regards,
Laurent Pinchart
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
