Re: [PATCH 2/6] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

Thank you for the review.

On Thursday 03 October 2013 08:54:19 Hans Verkuil wrote:
> On 10/03/2013 01:55 AM, Laurent Pinchart wrote:
> > From: Sergio Aguirre <sergio.a.aguirre@xxxxxxxxx>
> > 
> > This adds a very simplistic driver to utilize the CSI2A interface inside
> > the ISS subsystem in OMAP4, and dump the data to memory.
> > 
> > Check Documentation/video4linux/omap4_camera.txt for details.
> > 
> > This commit adds video devices support.
> > 
> > Signed-off-by: Sergio Aguirre <sergio.a.aguirre@xxxxxxxxx>
> > 
> > [Port the driver to v3.12-rc3, including the following changes
> > - Don't include plat/ headers
> > - Don't use cpu_is_omap44xx() macro
> > - Don't depend on EXPERIMENTAL
> > - Fix s_crop operation prototype
> > - Update link_notify prototype
> > - Rename media_entity_remote_source to media_entity_remote_pad]
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > 
> >  drivers/staging/media/omap4iss/iss_video.c | 1129 +++++++++++++++++++++++
> >  drivers/staging/media/omap4iss/iss_video.h |  201 +++++
> >  2 files changed, 1330 insertions(+)
> >  create mode 100644 drivers/staging/media/omap4iss/iss_video.c
> >  create mode 100644 drivers/staging/media/omap4iss/iss_video.h
> > 
> > diff --git a/drivers/staging/media/omap4iss/iss_video.c
> > b/drivers/staging/media/omap4iss/iss_video.c new file mode 100644
> > index 0000000..31f1b88
> > --- /dev/null
> > +++ b/drivers/staging/media/omap4iss/iss_video.c
> 
> <snip>
> 
> > +/* ---------------------------------------------------------------------
> > + * V4L2 ioctls
> > + */
> > +
> > +static int
> > +iss_video_querycap(struct file *file, void *fh, struct v4l2_capability
> > *cap) +{
> > +	struct iss_video *video = video_drvdata(file);
> > +
> > +	strlcpy(cap->driver, ISS_VIDEO_DRIVER_NAME, sizeof(cap->driver));
> > +	strlcpy(cap->card, video->video.name, sizeof(cap->card));
> > +	strlcpy(cap->bus_info, "media", sizeof(cap->bus_info));
> > +
> > +	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > +		cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
> > +	else
> > +		cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
> 
> Set device_caps instead of capabilities and add:
> 
> 	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;

Actually cap->capabilities should be V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING 
| V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT. I'll fix that.

> > +
> > +	return 0;
> > +}

[snip]

> > +static int
> > +iss_video_try_format(struct file *file, void *fh, struct v4l2_format
> > *format) +{
> > +	struct iss_video *video = video_drvdata(file);
> > +	struct v4l2_subdev_format fmt;
> > +	struct v4l2_subdev *subdev;
> > +	u32 pad;
> > +	int ret;
> > +
> > +	if (format->type != video->type)
> > +		return -EINVAL;
> > +
> > +	subdev = iss_video_remote_subdev(video, &pad);
> > +	if (subdev == NULL)
> > +		return -EINVAL;
> > +
> > +	iss_video_pix_to_mbus(&format->fmt.pix, &fmt.format);
> > +
> > +	fmt.pad = pad;
> > +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > +	ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
> > +	if (ret)
> > +		return ret == -ENOIOCTLCMD ? -EINVAL : ret;
> 
> Return ENOTTY instead of EINVAL. Even better, use v4l2_subdev_has_op() +
> v4l2_disable_ioctl() to just disable ioctls based on the available subdev
> ops in probe().

The remote subdev is required to implement the get_fmt() operation, otherwise 
the ISS driver can't work at all. What about adding a v4l2_subdev_has_op() 
check at probe time and removing the check here ?

> > +
> > +	iss_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix);
> > +	return 0;
> > +}

[snip]

> > +static int
> > +iss_video_enum_input(struct file *file, void *fh, struct v4l2_input
> > *input)
> > +{
> > +	if (input->index > 0)
> > +		return -EINVAL;
> > +
> > +	strlcpy(input->name, "camera", sizeof(input->name));
> > +	input->type = V4L2_INPUT_TYPE_CAMERA;
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +iss_video_g_input(struct file *file, void *fh, unsigned int *input)
> > +{
> > +	*input = 0;
> > +
> > +	return 0;
> > +}
> 
> Also add s_input.

Shouldn't I remove enum_input and g_input instead ?

[snip]

-- 
Regards,

Laurent Pinchart

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux