Fourth of the patches that fixes the lines over 80 characters in reg.c Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx> --- drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index 0cb0798..acdc003 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -1197,46 +1197,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData) /* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */ /* Calibration (3a). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x07<<24) | 0x0C68CE, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (3b). send RX reset signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x0F<<24) | 0x00401E, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (3c). turn-on RX Gm-C filter auto-tuning */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFEEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); udelay(150); /* Sleep 150 us */ /* Calibration (3e). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* ----- Calibration (4). TX LO leakage calibration */ /* Calibration (4a). TX LO leakage calibration */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFD6BC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); udelay(150); /* Sleep 150 us */ /* ----- Calibration (5). RX DC offset calibration */ /* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5b). turn off AGC servo-loop & RSSI */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x01<<24) | 0xEBFFC2, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* for LNA=11 -------- */ /* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x06<<24) | 0x343FCC, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFF6DC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); usleep(2000); /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* for LNA=10 -------- */ -- 1.8.1.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
