Fifth of the patches that fixes the lines over 80 characters in reg.c Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx> --- drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index acdc003..b05f9bd 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -1252,46 +1252,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData) /* for LNA=10 -------- */ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x06<<24) | 0x342FCC, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFF6DC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); usleep(2000); /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* for LNA=01 -------- */ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x06<<24) | 0x341FCC, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFF6DC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); usleep(2000); /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* for LNA=00 -------- */ /* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x06<<24) | 0x340FCC, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFF6DC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); usleep(2000); /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xFAEDC0, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* Calibration (5g). turn on AGC servo-loop */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x01<<24) | 0xEFFFC2, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); /* ----- Calibration (7). Switch RF chip to normal mode */ /* 0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24); + ltmp = (1 << 31) | (0 << 30) | (24 << 24) + | BitReverse((0x00<<24) | 0xF86100, 24); Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); usleep(5000); break; -- 1.8.1.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
