[PATCH 12/15] staging: comedi: comedi_bond: get INSN_CONFIG_DIO_QUERY info from horse's mouth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The DIO subdevice of the "comedi_bond" device attempts to remember the
directions of DIO channels itself in the `io_bits` member of the
subdevice, but that is only large enough for the first 32 channels and
it might not be accurate anyway as changing the direction of one channel
may have affected a whole group of channels and we have no idea of the
initial directions before the "bonded" device was linked to the the
"comedi_bond" device.  It would be better to ask the bonded device for
this information when handling a `INSN_CONFIG_DIO_QUERY` configuration
instruction.  Add new function `comedi_dio_get_config()` to the
"kcomedilib" module to allow us to get the DIO direction of a channel
and use it.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/comedilib.h                 |  2 +
 drivers/staging/comedi/drivers/comedi_bond.c       | 49 ++++++++--------------
 .../staging/comedi/kcomedilib/kcomedilib_main.c    | 21 ++++++++++
 3 files changed, 40 insertions(+), 32 deletions(-)

diff --git a/drivers/staging/comedi/comedilib.h b/drivers/staging/comedi/comedilib.h
index 1a78b15..47b1640 100644
--- a/drivers/staging/comedi/comedilib.h
+++ b/drivers/staging/comedi/comedilib.h
@@ -21,6 +21,8 @@
 
 struct comedi_device *comedi_open(const char *path);
 int comedi_close(struct comedi_device *dev);
+int comedi_dio_get_config(struct comedi_device *dev, unsigned int subdev,
+			  unsigned int chan, unsigned int *io);
 int comedi_dio_config(struct comedi_device *dev, unsigned int subdev,
 		      unsigned int chan, unsigned int io);
 int comedi_dio_bitfield(struct comedi_device *dev, unsigned int subdev,
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index 2ea605f..a1c51a2 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -124,59 +124,44 @@ static int bonding_dio_insn_config(struct comedi_device *dev,
 				   struct comedi_insn *insn, unsigned int *data)
 {
 	struct comedi_bond_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec), ret, io_bits = s->io_bits;
-	unsigned int chanid_offset;
-	unsigned int io;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	int ret;
 	struct bonded_device *bdev;
 	struct bonded_device **devs;
 
-	if (chan < 0 || chan >= devpriv->nchans)
-		return -EINVAL;
-
 	/*
-	 * Locate bonded subdevice.
+	 * Locate bonded subdevice and adjust channel.
 	 */
-	chanid_offset = 0;
 	devs = devpriv->devs;
-	for (bdev = *devs++; chan >= chanid_offset + bdev->nchans;
-	     bdev = *devs++)
-		chanid_offset += bdev->nchans;
+	for (bdev = *devs++; chan >= bdev->nchans; bdev = *devs++)
+		chan -= bdev->nchans;
 
 	/*
 	 * The input or output configuration of each digital line is
 	 * configured by a special insn_config instruction.  chanspec
 	 * contains the channel to be changed, and data[0] contains the
-	 * value COMEDI_INPUT or COMEDI_OUTPUT.
+	 * configuration instruction INSN_CONFIG_DIO_OUTPUT,
+	 * INSN_CONFIG_DIO_INPUT or INSN_CONFIG_DIO_QUERY.
+	 *
+	 * Note that INSN_CONFIG_DIO_OUTPUT == COMEDI_OUTPUT,
+	 * and INSN_CONFIG_DIO_INPUT == COMEDI_INPUT.  This is deliberate ;)
 	 */
 	switch (data[0]) {
 	case INSN_CONFIG_DIO_OUTPUT:
-		io = COMEDI_OUTPUT;	/* is this really necessary? */
-		io_bits |= 1 << chan;
-		break;
 	case INSN_CONFIG_DIO_INPUT:
-		io = COMEDI_INPUT;	/* is this really necessary? */
-		io_bits &= ~(1 << chan);
+		ret = comedi_dio_config(bdev->dev, bdev->subdev, chan, data[0]);
 		break;
 	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
+		ret = comedi_dio_get_config(bdev->dev, bdev->subdev, chan,
+					    &data[1]);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 		break;
 	}
-	/* 'real' channel id for this subdev.. */
-	chan -= chanid_offset;
-	ret = comedi_dio_config(bdev->dev, bdev->subdev, chan, io);
-	if (ret != 1)
-		return -EINVAL;
-	/*
-	 * Finally, save the new io_bits values since we didn't get an error
-	 * above.
-	 */
-	s->io_bits = io_bits;
-	return insn->n;
+	if (ret >= 0)
+		ret = insn->n;
+	return ret;
 }
 
 static void *realloc(const void *oldmem, size_t newlen, size_t oldlen)
diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
index 066083c..c7e809b 100644
--- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
+++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
@@ -123,6 +123,27 @@ error:
 	return ret;
 }
 
+int comedi_dio_get_config(struct comedi_device *dev, unsigned int subdev,
+			  unsigned int chan, unsigned int *io)
+{
+	struct comedi_insn insn;
+	unsigned int data[2];
+	int ret;
+
+	memset(&insn, 0, sizeof(insn));
+	insn.insn = INSN_CONFIG;
+	insn.n = 2;
+	insn.subdev = subdev;
+	insn.chanspec = CR_PACK(chan, 0, 0);
+	data[0] = INSN_CONFIG_DIO_QUERY;
+	data[1] = 0;
+	ret = comedi_do_insn(dev, &insn, data);
+	if (ret >= 0)
+		*io = data[1];
+	return ret;
+}
+EXPORT_SYMBOL_GPL(comedi_dio_get_config);
+
 int comedi_dio_config(struct comedi_device *dev, unsigned int subdev,
 		      unsigned int chan, unsigned int io)
 {
-- 
1.8.3.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux