The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to be built, which handles various National Instruments ISA-PNP data acquisition cards. The configuration option currently depends on ISAPNP. The "ni_atmio" module is a "legacy" comedi driver with no auto-configuration support and it doesn't register as a PNP card driver. The only difference in initialization from the other comedi ISA card drivers is that it will use the ISA-PNP functions to find, attach and activate the card if no I/O base address has been specified by the user in the COMEDI_DEVCONFIG ioctl. The module compiles fine without the ISAPNP configuration option as the <linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline functions if the ISAPNP and PNP options, respectively, are not enabled. Remove the dependancy on the ISAPNP option since the module builds without it and can be used without it. (There is a very slim chance that comedi will support proper ISA PNP drivers one day, in which case the ni_atmio driver could be converted to use this support and not support manual configuration. However, not all the PnP IDs of boards supported by this driver are currently known to us.) Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 8c6527f..57362fe 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -467,7 +467,6 @@ config COMEDI_NI_AT_AO config COMEDI_NI_ATMIO tristate "NI AT-MIO E series ISA-PNP card support" - depends on ISAPNP select COMEDI_8255 select COMEDI_NI_TIO ---help--- -- 1.8.2.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
