Fixed spacing/tabing issues.
Signed-off-by: Lilis Iskandar <veeableful@xxxxxxxxx>
---
drivers/staging/bcm/InterfaceIdleMode.c | 38
++++++++++++++++-----------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c
b/drivers/staging/bcm/InterfaceIdleMode.c
index 5347828..0c93048 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -52,18 +52,18 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter
*Adapter, unsigned int *pui
if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "
Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
- if (ntohl(*(puiBuffer+1)) == 0 ) {
+ if (ntohl(*(puiBuffer+1)) == 0) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Got IDLE MODE WAKE UP Response From F/W");
- status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead,
sizeof(uiRegRead));
+ status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead,
sizeof(uiRegRead));
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while
clearing Idle Mode Reg");
return status;
}
if (Adapter->ulPowerSaveMode ==
DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
- uiRegRead = 0x00000000 ;
- status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR,
&uiRegRead, sizeof(uiRegRead));
+ uiRegRead = 0x00000000;
+ status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR,
&uiRegRead, sizeof(uiRegRead));
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while
clearing Idle Mode Reg");
return status;
@@ -98,11 +98,11 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter
*Adapter, unsigned int *pui
if (TRUE == Adapter->IdleMode)
{
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Device is already in Idle mode....");
- return status ;
+ return status;
}
uiRegRead = 0;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Got Req from F/W to go in IDLE mode \n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Got Req from F/W to go in IDLE mode\n");
if (Adapter->chip_id == BCS220_2 ||
Adapter->chip_id == BCS220_2BC ||
@@ -119,7 +119,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter
*Adapter, unsigned int *pui
uiRegRead |= (1<<17);
- status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead,
sizeof(uiRegRead));
+ status = wrmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead,
sizeof(uiRegRead));
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while
clearing Idle Mode Reg\n");
return status;
@@ -137,19 +137,19 @@ int InterfaceIdleModeRespond(struct
bcm_mini_adapter *Adapter, unsigned int *pui
static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter,
unsigned int Pattern)
{
- int status = STATUS_SUCCESS;
+ int status = STATUS_SUCCESS;
unsigned int value;
- unsigned int chip_id ;
+ unsigned int chip_id;
unsigned long timeout = 0, itr = 0;
- int lenwritten = 0;
+ int lenwritten = 0;
unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF};
struct bcm_interface_adapter *psInterfaceAdapter =
Adapter->pvInterfaceAdapter;
/* Abort Bus suspend if its already suspended */
if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE ==
Adapter->bDoSuspend)) {
status = usb_autopm_get_interface(psInterfaceAdapter->interface);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Bus got wakeup..Aborting Idle mode... status:%d \n", status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Bus got wakeup..Aborting Idle mode... status:%d\n", status);
}
@@ -179,7 +179,7 @@ static int InterfaceAbortIdlemode(struct
bcm_mini_adapter *Adapter, unsigned int
* To be Done in Thread Context.
* Not using Asynchronous Mechanism.
*/
- status = usb_interrupt_msg (psInterfaceAdapter->udev,
+ status = usb_interrupt_msg(psInterfaceAdapter->udev,
usb_sndintpipe(psInterfaceAdapter->udev,
psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
aucAbortPattern,
@@ -195,16 +195,16 @@ static int InterfaceAbortIdlemode(struct
bcm_mini_adapter *Adapter, unsigned int
/* mdelay(25); */
- timeout = jiffies + msecs_to_jiffies(50) ;
- while ( timeout > jiffies ) {
- itr++ ;
+ timeout = jiffies + msecs_to_jiffies(50);
+ while (timeout > jiffies) {
+ itr++;
rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
if (0xbece3200 == (chip_id&~(0xF0)))
chip_id = chip_id&~(0xF0);
if (chip_id == Adapter->chip_id)
break;
}
- if (timeout < jiffies )
+ if (timeout < jiffies)
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Not able to read chip-id even after 25 msec");
else
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,
"Number of completed iteration to read chip-id :%lu", itr);
@@ -242,14 +242,14 @@ void InterfaceHandleShutdownModeWakeup(struct
bcm_mini_adapter *Adapter)
uiRegVal = 0;
Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR,
&uiRegVal, sizeof(uiRegVal));
if (Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to
DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to
DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
return;
}
}
- else {
+ else {
- /* clear Interrupt EP registers. */
+ /* clear Interrupt EP registers. */
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal,
sizeof(uiRegVal));
if (bytes < 0) {
Status = bytes;
--
1.8.3.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
