I think 'tsi148_dma_list_exec()' should also be modified to check this error list ? Kind regards, Steven De Roo -----Oorspronkelijk bericht----- Van: Martyn Welch [mailto:martyn.welch@xxxxxx] Verzonden: dinsdag 11 juni 2013 12:20 Aan: Greg Kroah-Hartman CC: devel@xxxxxxxxxxxxxxxxxxxx; Manohar Vanga; De Roo, Steven; Martyn Welch Onderwerp: [PATCH] vme: tsi148: Only store VME bus errors if they will be checked The TSI148 driver provides an optional mechanism for ensuring that errors resulting from posted transfers are caught whilst still relevant. To do this errors are stored in a link list. If bus errors are not checked, this list would grow until available memory had been exhausted. Only store the errors in a link list if error detection is switched on. Reported-by: De Roo, Steven <steven.deroo@xxxxxxxxxxxxxxxxx> Signed-off-by: Martyn Welch <martyn.welch@xxxxxx> --- drivers/vme/bridges/vme_tsi148.c | 28 +++++++++++++++++----------- 1 files changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c index 9c1aa4d..94ce64d 100644 --- a/drivers/vme/bridges/vme_tsi148.c +++ b/drivers/vme/bridges/vme_tsi148.c @@ -169,7 +169,7 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) unsigned int error_addr_high, error_addr_low; unsigned long long error_addr; u32 error_attrib; - struct vme_bus_error *error; + struct vme_bus_error *error = NULL; struct tsi148_driver *bridge; bridge = tsi148_bridge->driver_priv; @@ -186,16 +186,22 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) "Occurred\n"); } - error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); - if (error) { - error->address = error_addr; - error->attributes = error_attrib; - list_add_tail(&error->list, &tsi148_bridge->vme_errors); - } else { - dev_err(tsi148_bridge->parent, "Unable to alloc memory for " - "VMEbus Error reporting\n"); - dev_err(tsi148_bridge->parent, "VME Bus Error at address: " - "0x%llx, attributes: %08x\n", error_addr, error_attrib); + if (err_chk) { + error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); + if (error) { + error->address = error_addr; + error->attributes = error_attrib; + list_add_tail(&error->list, &tsi148_bridge->vme_errors); + } else { + dev_err(tsi148_bridge->parent, + "Unable to alloc memory for VMEbus Error reporting\n"); + } + } + + if (!error) { + dev_err(tsi148_bridge->parent, + "VME Bus Error at address: 0x%llx, attributes: %08x\n", + error_addr, error_attrib); } /* Clear Status */ -- 1.7.0.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
