This patch fixes the comments in r8192U.h by:
1) replacing '// ... ' comments with '/* ... */' comments
2) removing from the comments the date and the developer's name
3) removing unnecessary comments when variables naming is
descriptive enough
Also, it fixes some typos found in the comments and arranges
the comments placement and content aiming to improve code
readability and to limit line length below 80 chars, without
loosing the comment's substance.
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---
Changes from v1:
1) Removes the following comments (cascade from change in patch 1):
VI_PRIORITY, //0x05
BEACON_PRIORITY, //0x0A
UART_PRIORITY //0x0F
2) Fixes some additional typos and space issues found in comments
drivers/staging/rtl8192u/r8192U.h | 529 ++++++++++++++++++++-----------------
1 file changed, 284 insertions(+), 245 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 5e4d46b..5b30e3c 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -1,19 +1,19 @@
/*
- This is part of rtl8187 OpenSource driver.
- Copyright (C) Andrea Merello 2004-2005 <andreamrl@xxxxxxxxxx>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver
-
- Parts of this driver are based on the rtl8192 driver skeleton
- from Patric Schenke & Andres Salomon
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
- We want to thank the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
+ * This is part of rtl8187 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004-2005 <andreamrl@xxxxxxxxxx>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official realtek driver
+ *
+ * Parts of this driver are based on the rtl8192 driver skeleton
+ * from Patric Schenke & Andres Salomon
+ *
+ * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+ *
+ * We want to thank the Authors of those projects and the Ndiswrapper
+ * project Authors.
+ */
#ifndef R819xU_H
#define R819xU_H
@@ -29,10 +29,10 @@
#include <linux/usb.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
-#include <linux/rtnetlink.h> //for rtnl_lock()
+#include <linux/rtnetlink.h>
#include <linux/wireless.h>
#include <linux/timer.h>
-#include <linux/proc_fs.h> // Necessary because we use the proc fs
+#include <linux/proc_fs.h>
#include <linux/if_arp.h>
#include <linux/random.h>
#include <asm/io.h>
@@ -40,7 +40,7 @@
#define RTL8192U
#define RTL819xU_MODULE_NAME "rtl819xU"
-//added for HW security, john.0629
+/* HW security */
#define FALSE 0
#define TRUE 1
#define MAX_KEY_LEN 61
@@ -79,7 +79,6 @@
#define BIT30 0x40000000
#define BIT31 0x80000000
-// Rx smooth factor
#define Rx_Smooth_Factor 20
#define DMESG(x,a...)
#define DMESGW(x,a...)
@@ -91,44 +90,44 @@ do { if (rt_global_debug_component & component) \
##args);\
}while(0);
-#define COMP_TRACE BIT0 // For function call tracing.
-#define COMP_DBG BIT1 // Only for temporary debug message.
-#define COMP_INIT BIT2 // during driver initialization / halt / reset.
-
-
-#define COMP_RECV BIT3 // Receive data path.
-#define COMP_SEND BIT4 // Send part path.
-#define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02.
-#define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related.
-#define COMP_EPROM BIT7 // 802.11 link related: join/start BSS, leave BSS.
-#define COMP_SWBW BIT8 // For bandwidth switch.
-#define COMP_POWER_TRACKING BIT9 //FOR 8190 TX POWER TRACKING
-#define COMP_TURBO BIT10 // For Turbo Mode related. By Annie, 2005-10-21.
-#define COMP_QOS BIT11 // For QoS.
-#define COMP_RATE BIT12 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko.
-#define COMP_RM BIT13 // For Radio Measurement.
-#define COMP_DIG BIT14 // For DIG, 2006.09.25, by rcnjko.
-#define COMP_PHY BIT15
-#define COMP_CH BIT16 //channel setting debug
-#define COMP_TXAGC BIT17 // For Tx power, 060928, by rcnjko.
-#define COMP_HIPWR BIT18 // For High Power Mechanism, 060928, by rcnjko.
-#define COMP_HALDM BIT19 // For HW Dynamic Mechanism, 061010, by rcnjko.
-#define COMP_SEC BIT20 // Event handling
-#define COMP_LED BIT21 // For LED.
-#define COMP_RF BIT22 // For RF.
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-#define COMP_RXDESC BIT23 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
-//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-#define COMP_FIRMWARE BIT24 //for firmware downloading
-#define COMP_HT BIT25 // For 802.11n HT related information. by Emily 2006-8-11
-#define COMP_AMSDU BIT26 // For A-MSDU Debugging
-
-#define COMP_SCAN BIT27
-#define COMP_DOWN BIT29 //for rm driver module
-#define COMP_RESET BIT30 //for silent reset
-#define COMP_ERR BIT31 //for error out, always on
+#define COMP_TRACE BIT0 /* Function call tracing. */
+#define COMP_DBG BIT1
+#define COMP_INIT BIT2 /* Driver initialization/halt/reset. */
+
+
+#define COMP_RECV BIT3 /* Receive data path. */
+#define COMP_SEND BIT4 /* Send data path. */
+#define COMP_IO BIT5
+/* 802.11 Power Save mode or System/Device Power state. */
+#define COMP_POWER BIT6
+/* 802.11 link related: join/start BSS, leave BSS. */
+#define COMP_EPROM BIT7
+#define COMP_SWBW BIT8 /* Bandwidth switch. */
+#define COMP_POWER_TRACKING BIT9 /* 8190 TX Power Tracking */
+#define COMP_TURBO BIT10 /* Turbo Mode */
+#define COMP_QOS BIT11
+#define COMP_RATE BIT12 /* Rate Adaptive mechanism */
+#define COMP_RM BIT13 /* Radio Measurement */
+#define COMP_DIG BIT14
+#define COMP_PHY BIT15
+#define COMP_CH BIT16 /* Channel setting debug */
+#define COMP_TXAGC BIT17 /* Tx power */
+#define COMP_HIPWR BIT18 /* High Power Mechanism */
+#define COMP_HALDM BIT19 /* HW Dynamic Mechanism */
+#define COMP_SEC BIT20 /* Event handling */
+#define COMP_LED BIT21
+#define COMP_RF BIT22
+#define COMP_RXDESC BIT23 /* Rx desc information for SD3 debug */
+
+/* 11n or 8190 specific code */
+
+#define COMP_FIRMWARE BIT24 /* Firmware downloading */
+#define COMP_HT BIT25 /* 802.11n HT related information */
+#define COMP_AMSDU BIT26 /* A-MSDU Debugging */
+#define COMP_SCAN BIT27
+#define COMP_DOWN BIT29 /* rm driver module */
+#define COMP_RESET BIT30 /* Silent reset */
+#define COMP_ERR BIT31 /* Error out, always on */
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
@@ -137,8 +136,11 @@ do { if (rt_global_debug_component & component) \
printk("Assertion failed! %s,%s,%s,line=%d\n", \
#expr,__FILE__,__FUNCTION__,__LINE__); \
}
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+/*
+ * Debug out data buf.
+ * If you want to print DATA buffer related BA,
+ * please set ieee80211_debug_level to DATA|BA
+ */
#define RT_DEBUG_DATA(level, data, datalen) \
do{ if ((rt_global_debug_component & (level)) == (level)) \
{ \
@@ -159,9 +161,7 @@ do { if (rt_global_debug_component & component) \
#endif /* RTL8169_DEBUG */
-//
-// Queue Select Value in TxDesc
-//
+/* Queue Select Value in TxDesc */
#define QSLT_BK 0x1
#define QSLT_BE 0x0
#define QSLT_VI 0x4
@@ -205,13 +205,13 @@ do { if (rt_global_debug_component & component) \
#define IEEE80211_WATCH_DOG_TIME 2000
#define PHY_Beacon_RSSI_SLID_WIN_MAX 10
-//for txpowertracking by amy
+/* For Tx Power Tracking */
#define OFDM_Table_Length 19
#define CCK_Table_length 12
-/* for rtl819x */
+/* For rtl819x */
typedef struct _tx_desc_819x_usb {
- //DWORD 0
+ /* DWORD 0 */
u16 PktSize;
u8 Offset;
u8 Reserved0:3;
@@ -221,7 +221,7 @@ typedef struct _tx_desc_819x_usb {
u8 LINIP:1;
u8 OWN:1;
- //DWORD 1
+ /* DWORD 1 */
u8 TxFWInfoSize;
u8 RATid:3;
u8 DISFB:1;
@@ -236,13 +236,13 @@ typedef struct _tx_desc_819x_usb {
u8 SecDescAssign:1;
u8 SecType:2;
- //DWORD 2
+ /* DWORD 2 */
u16 TxBufferSize;
u8 ResvForPaddingLen:7;
u8 Reserved3:1;
u8 Reserved4;
- //DWORD 3, 4, 5
+ /* DWORD 3, 4, 5 */
u32 Reserved5;
u32 Reserved6;
u32 Reserved7;
@@ -250,12 +250,12 @@ typedef struct _tx_desc_819x_usb {
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
typedef struct _tx_desc_819x_usb_aggr_subframe {
- //DWORD 0
+ /* DWORD 0 */
u16 PktSize;
u8 Offset;
u8 TxFWInfoSize;
- //DWORD 1
+ /* DWORD 1 */
u8 RATid:3;
u8 DISFB:1;
u8 USERATE:1;
@@ -276,7 +276,7 @@ typedef struct _tx_desc_819x_usb_aggr_subframe {
typedef struct _tx_desc_cmd_819x_usb {
- //DWORD 0
+ /* DWORD 0 */
u16 Reserved0;
u8 Reserved1;
u8 Reserved2:3;
@@ -286,17 +286,17 @@ typedef struct _tx_desc_cmd_819x_usb {
u8 LINIP:1;
u8 OWN:1;
- //DOWRD 1
+ /* DOWRD 1 */
u8 TxFWInfoSize;
u8 Reserved3;
u8 QueueSelect;
u8 Reserved4;
- //DOWRD 2
+ /* DOWRD 2 */
u16 TxBufferSize;
u16 Reserved5;
- //DWORD 3,4,5
+ /* DWORD 3, 4, 5 */
u32 Reserved6;
u32 Reserved7;
u32 Reserved8;
@@ -304,33 +304,36 @@ typedef struct _tx_desc_cmd_819x_usb {
typedef struct _tx_fwinfo_819x_usb {
- //DOWRD 0
- u8 TxRate:7;
- u8 CtsEnable:1;
- u8 RtsRate:7;
- u8 RtsEnable:1;
- u8 TxHT:1;
- u8 Short:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 TxBandwidth:1; // This is used for HT MCS rate only.
- u8 TxSubCarrier:2; // This is used for legacy OFDM rate only.
- u8 STBC:2;
- u8 AllowAggregation:1;
- u8 RtsHT:1; //Interpret RtsRate field as high throughput data rate
- u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 RtsBandwidth:1; // This is used for HT MCS rate only.
- u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only.
- u8 RtsSTBC:2;
- u8 EnableCPUDur:1; //Enable firmware to recalculate and assign packet duration
-
- //DWORD 1
- u32 RxMF:2;
- u32 RxAMD:3;
- u32 TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd
- u32 Reserved1:2;
- u32 TxAGCOffSet:4;
- u32 TxAGCSign:1;
- u32 Tx_INFO_RSVD:6;
- u32 PacketID:13;
+ /* DOWRD 0 */
+ u8 TxRate:7;
+ u8 CtsEnable:1;
+ u8 RtsRate:7;
+ u8 RtsEnable:1;
+ u8 TxHT:1;
+ u8 Short:1; /* Error out, always on */
+ u8 TxBandwidth:1; /* Used for HT MCS rate only */
+ u8 TxSubCarrier:2; /* Used for legacy OFDM rate only */
+ u8 STBC:2;
+ u8 AllowAggregation:1;
+ /* Interpret RtsRate field as high throughput data rate */
+ u8 RtsHT:1;
+ u8 RtsShort:1; /* Short PLCP for CCK or short GI for 11n MCS */
+ u8 RtsBandwidth:1; /* Used for HT MCS rate only */
+ u8 RtsSubcarrier:2;/* Used for legacy OFDM rate only */
+ u8 RtsSTBC:2;
+ /* Enable firmware to recalculate and assign packet duration */
+ u8 EnableCPUDur:1;
+
+ /* DWORD 1 */
+ u32 RxMF:2;
+ u32 RxAMD:3;
+ /* 1 indicate Tx info gathered by firmware and returned by Rx Cmd */
+ u32 TxPerPktInfoFeedback:1;
+ u32 Reserved1:2;
+ u32 TxAGCOffSet:4;
+ u32 TxAGCSign:1;
+ u32 Tx_INFO_RSVD:6;
+ u32 PacketID:13;
}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
typedef struct rtl8192_rx_info {
@@ -340,7 +343,7 @@ typedef struct rtl8192_rx_info {
}rtl8192_rx_info ;
typedef struct rx_desc_819x_usb{
- //DOWRD 0
+ /* DOWRD 0 */
u16 Length:14;
u16 CRC32:1;
u16 ICV:1;
@@ -350,37 +353,30 @@ typedef struct rx_desc_819x_usb{
u8 SWDec:1;
u8 Reserved1:4;
- //DWORD 1
+ /* DWORD 1 */
u32 Reserved2;
-
- //DWORD 2
-
- //DWORD 3
-
}rx_desc_819x_usb, *prx_desc_819x_usb;
#ifdef USB_RX_AGGREGATION_SUPPORT
typedef struct _rx_desc_819x_usb_aggr_subframe{
- //DOWRD 0
+ /* DOWRD 0 */
u16 Length:14;
u16 CRC32:1;
u16 ICV:1;
u8 Offset;
u8 RxDrvInfoSize;
- //DOWRD 1
+ /* DOWRD 1 */
u8 Shift:2;
u8 PHYStatus:1;
u8 SWDec:1;
u8 Reserved1:4;
u8 Reserved2;
u16 Reserved3;
- //DWORD 2
- //DWORD 3
}rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
#endif
typedef struct rx_drvinfo_819x_usb{
- //DWORD 0
+ /* DWORD 0 */
u16 Reserved1:12;
u16 PartAggr:1;
u16 FirstAGGR:1;
@@ -397,14 +393,15 @@ typedef struct rx_drvinfo_819x_usb{
u8 Bcast:1;
u8 Reserved4:1;
- //DWORD 1
+ /* DWORD 1 */
u32 TSFL;
}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
-
-#define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */
-#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/
+/* Support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE 8
+/* For RTL8190 */
+#define MAX_FIRMWARE_INFORMATION_SIZE 32
#define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE)
#define ENCRYPTION_MAX_OVERHEAD 128
#define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb)
@@ -422,7 +419,8 @@ typedef struct rx_drvinfo_819x_usb{
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
#define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
#endif
-#define scrclng 4 // octets for crc32 (FCS, ICV)
+/* Octets for crc32 (FCS, ICV) */
+#define scrclng 4
typedef enum rf_optype
{
@@ -460,13 +458,13 @@ typedef struct _rt_firmare_seg_container {
typedef struct _rt_firmware{
firmware_status_e firmware_status;
u16 cmdpacket_frag_thresold;
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000
u8 firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];
u16 firmware_buf_size;
}rt_firmware, *prt_firmware;
-//+by amy 080507
-#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP
+/* Add this to 9100 bytes to receive A-MSDU from RT-AP */
+#define MAX_RECEIVE_BUFFER_SIZE 9100
typedef struct _rt_firmware_info_819xUsb{
u8 sz_info[16];
@@ -511,8 +509,11 @@ typedef struct _rt_firmware_info_819xUsb{
#define RSVD_FW_QUEUE_PAGE_CMD_SHIFT 0x08
#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00
#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT 0x08
-//=================================================================
-//=================================================================
+
+/*
+ * =================================================================
+ * =================================================================
+ */
#define EPROM_93c46 0
#define EPROM_93c56 1
@@ -571,31 +572,37 @@ typedef struct _rt_9x_tx_rate_history {
u32 ht_mcs[4][16];
}rt_tx_rahis_t, *prt_tx_rahis_t;
typedef struct _RT_SMOOTH_DATA_4RF {
- char elements[4][100];//array to store values
- u32 index; //index to current array to store
- u32 TotalNum; //num of valid elements
- u32 TotalVal[4]; //sum of valid elements
+ char elements[4][100]; /* array to store values */
+ u32 index; /* index to current array to store */
+ u32 TotalNum; /* num of valid elements */
+ u32 TotalVal[4]; /* sum of valid elements */
}RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;
-#define MAX_8192U_RX_SIZE 8192 // This maybe changed for D-cut larger aggregation size
-//stats seems messed up, clean it ASAP
+/* This maybe changed for D-cut larger aggregation size */
+#define MAX_8192U_RX_SIZE 8192
+/* Stats seems messed up, clean it ASAP */
typedef struct Stats {
unsigned long txrdu;
unsigned long rxok;
unsigned long rxframgment;
unsigned long rxurberr;
unsigned long rxstaterr;
- unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
- unsigned long received_preamble_GI[2][32]; //0: Long preamble/GI, 1:Short preamble/GI
- unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
- unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
- unsigned long numpacket_matchbssid; // debug use only.
- unsigned long numpacket_toself; // debug use only.
- unsigned long num_process_phyinfo; // debug use only.
+ /* 0: Total, 1: OK, 2: CRC, 3: ICV */
+ unsigned long received_rate_histogram[4][32];
+ /* 0: Long preamble/GI, 1: Short preamble/GI */
+ unsigned long received_preamble_GI[2][32];
+ /* level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K) */
+ unsigned long rx_AMPDUsize_histogram[5];
+ /* level: (<5), (5~10), (10~20), (20~40), (>40) */
+ unsigned long rx_AMPDUnum_histogram[5];
+ unsigned long numpacket_matchbssid;
+ unsigned long numpacket_toself;
+ unsigned long num_process_phyinfo;
unsigned long numqry_phystatus;
unsigned long numqry_phystatusCCK;
unsigned long numqry_phystatusHT;
- unsigned long received_bwtype[5]; //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
+ /* 0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate */
+ unsigned long received_bwtype[5];
unsigned long txnperr;
unsigned long txnpdrop;
unsigned long txresumed;
@@ -649,30 +656,35 @@ typedef struct Stats {
u8 last_packet_rate;
unsigned long slide_signal_strength[100];
unsigned long slide_evm[100];
- unsigned long slide_rssi_total; // For recording sliding window's RSSI value
- unsigned long slide_evm_total; // For recording sliding window's EVM value
- long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct.
+ /* For recording sliding window's RSSI value */
+ unsigned long slide_rssi_total;
+ /* For recording sliding window's EVM value */
+ unsigned long slide_evm_total;
+ /* Transformed in dbm. Beautified signal strength for UI, not correct */
+ long signal_strength;
long signal_quality;
long last_signal_strength_inpercent;
- long recv_signal_power; // Correct smoothed ss in Dbm, only used in driver to report real power now.
+ /* Correct smoothed ss in dbm, only used in driver
+ * to report real power now */
+ long recv_signal_power;
u8 rx_rssi_percentage[4];
u8 rx_evm_percentage[2];
long rxSNRdB[4];
rt_tx_rahis_t txrate;
- u32 Slide_Beacon_pwdb[100]; //cosa add for beacon rssi
- u32 Slide_Beacon_Total; //cosa add for beacon rssi
+ /* For beacon RSSI */
+ u32 Slide_Beacon_pwdb[100];
+ u32 Slide_Beacon_Total;
RT_SMOOTH_DATA_4RF cck_adc_pwdb;
u32 CurrentShowTxate;
} Stats;
-// Bandwidth Offset
+/* Bandwidth Offset */
#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0
#define HAL_PRIME_CHNL_OFFSET_LOWER 1
#define HAL_PRIME_CHNL_OFFSET_UPPER 2
-//+by amy 080507
typedef struct ChnlAccessSetting {
u16 SIFS_Timer;
@@ -684,23 +696,50 @@ typedef struct ChnlAccessSetting {
}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
typedef struct _BB_REGISTER_DEFINITION{
- u32 rfintfs; // set software control: // 0x870~0x877[8 bytes]
- u32 rfintfi; // readback data: // 0x8e0~0x8e7[8 bytes]
- u32 rfintfo; // output data: // 0x860~0x86f [16 bytes]
- u32 rfintfe; // output enable: // 0x860~0x86f [16 bytes]
- u32 rf3wireOffset; // LSSI data: // 0x840~0x84f [16 bytes]
- u32 rfLSSI_Select; // BB Band Select: // 0x878~0x87f [8 bytes]
- u32 rfTxGainStage; // Tx gain stage: // 0x80c~0x80f [4 bytes]
- u32 rfHSSIPara1; // wire parameter control1 : // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
- u32 rfHSSIPara2; // wire parameter control2 : // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
- u32 rfSwitchControl; //Tx Rx antenna control : // 0x858~0x85f [16 bytes]
- u32 rfAGCControl1; //AGC parameter control1 : // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
- u32 rfAGCControl2; //AGC parameter control2 : // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
- u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
- u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
- u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
- u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
- u32 rfLSSIReadBack; //LSSI RF readback data // 0x8a0~0x8af [16 bytes]
+ /* set software control: 0x870~0x877 [8 bytes] */
+ u32 rfintfs;
+ /* readback data: 0x8e0~0x8e7 [8 bytes] */
+ u32 rfintfi;
+ /* output data: 0x860~0x86f [16 bytes] */
+ u32 rfintfo;
+ /* output enable: 0x860~0x86f [16 bytes] */
+ u32 rfintfe;
+ /* LSSI data: 0x840~0x84f [16 bytes] */
+ u32 rf3wireOffset;
+ /* BB Band Select: 0x878~0x87f [8 bytes] */
+ u32 rfLSSI_Select;
+ /* Tx gain stage: 0x80c~0x80f [4 bytes] */
+ u32 rfTxGainStage;
+ /* wire parameter control1: 0x820~0x823, 0x828~0x82b,
+ * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ u32 rfHSSIPara1;
+ /* wire parameter control2: 0x824~0x827, 0x82c~0x82f,
+ * 0x834~0x837, 0x83c~0x83f [16 bytes] */
+ u32 rfHSSIPara2;
+ /* Tx Rx antenna control: 0x858~0x85f [16 bytes] */
+ u32 rfSwitchControl;
+ /* AGC parameter control1: 0xc50~0xc53, 0xc58~0xc5b,
+ * 0xc60~0xc63, 0xc68~0xc6b [16 bytes] */
+ u32 rfAGCControl1;
+ /* AGC parameter control2: 0xc54~0xc57, 0xc5c~0xc5f,
+ * 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] */
+ u32 rfAGCControl2;
+ /* OFDM Rx IQ imbalance matrix: 0xc14~0xc17, 0xc1c~0xc1f,
+ * 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] */
+ u32 rfRxIQImbalance;
+ /* Rx IQ DC offset and Rx digital filter, Rx DC notch filter:
+ * 0xc10~0xc13, 0xc18~0xc1b,
+ * 0xc20~0xc23, 0xc28~0xc2b [16 bytes] */
+ u32 rfRxAFE;
+ /* OFDM Tx IQ imbalance matrix: 0xc80~0xc83, 0xc88~0xc8b,
+ * 0xc90~0xc93, 0xc98~0xc9b [16 bytes] */
+ u32 rfTxIQImbalance;
+ /* Tx IQ DC Offset and Tx DFIR type:
+ * 0xc84~0xc87, 0xc8c~0xc8f,
+ * 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] */
+ u32 rfTxAFE;
+ /* LSSI RF readback data: 0x8a0~0x8af [16 bytes] */
+ u32 rfLSSIReadBack;
}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
typedef enum _RT_RF_TYPE_819xU{
@@ -727,9 +766,9 @@ typedef struct _rate_adaptive {
u32 low_rssi_threshold_ratr;
u32 low_rssi_threshold_ratr_40M;
u32 low_rssi_threshold_ratr_20M;
- u8 ping_rssi_enable; //cosa add for test
- u32 ping_rssi_ratr; //cosa add for test
- u32 ping_rssi_thresh_for_ra;//cosa add for test
+ u8 ping_rssi_enable;
+ u32 ping_rssi_ratr;
+ u32 ping_rssi_thresh_for_ra;
u32 last_ratr;
} rate_adaptive, *prate_adaptive;
@@ -743,7 +782,7 @@ typedef struct _txbbgain_struct {
} txbbgain_struct, *ptxbbgain_struct;
typedef struct _ccktxbbgain_struct {
- //The Value is from a22 to a29 one Byte one time is much Safer
+ /* The value is from a22 to a29, one byte one time is much safer */
u8 ccktxbb_valuearray[8];
} ccktxbbgain_struct,*pccktxbbgain_struct;
@@ -756,7 +795,6 @@ typedef struct _init_gain {
u8 cca;
} init_gain, *pinit_gain;
-//by amy 0606
typedef struct _phy_ofdm_rx_status_report_819xusb {
u8 trsw_gain_X[4];
@@ -775,8 +813,9 @@ typedef struct _phy_ofdm_rx_status_report_819xusb {
}phy_sts_ofdm_819xusb_t;
typedef struct _phy_cck_rx_status_report_819xusb {
- /* For CCK rate descriptor. This is a unsigned 8:1 variable. LSB bit presend
- 0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
+ /* For CCK rate descriptor. This is an unsigned 8:1 variable.
+ * LSB bit presend 0.5. And MSB 7 bts presend a signed value.
+ * Range from -64~+63.5. */
u8 adc_pwdb_X[4];
u8 sq_rpt;
u8 cck_agc_rpt;
@@ -801,24 +840,27 @@ typedef enum _RT_CUSTOMER_ID
RT_CID_819x_CAMEO = 6,
RT_CID_819x_RUNTOP = 7,
RT_CID_819x_Senao = 8,
- RT_CID_TOSHIBA = 9, // Merge by Jacken, 2008/01/31.
+ RT_CID_TOSHIBA = 9,
RT_CID_819x_Netcore = 10,
RT_CID_Nettronix = 11,
RT_CID_DLINK = 12,
RT_CID_PRONET = 13,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
-//================================================================================
-// LED customization.
-//================================================================================
+/*
+ * ==========================================================================
+ * LED customization.
+ * ==========================================================================
+ */
typedef enum _LED_STRATEGY_8190{
- SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
- SW_LED_MODE1, // SW control for PCI Express
- SW_LED_MODE2, // SW control for Cameo.
- SW_LED_MODE3, // SW contorl for RunTop.
- SW_LED_MODE4, // SW control for Netcore
- HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+ SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
+ SW_LED_MODE1, /* SW control for PCI Express */
+ SW_LED_MODE2, /* SW control for Cameo. */
+ SW_LED_MODE3, /* SW control for RunTop. */
+ SW_LED_MODE4, /* SW control for Netcore. */
+ /* HW control 2 LEDs, LED0 and LED1 (4 different control modes) */
+ HW_LED,
}LED_STRATEGY_8190, *PLED_STRATEGY_8190;
typedef enum _RESET_TYPE {
@@ -840,7 +882,7 @@ typedef enum _tag_TxCmd_Config_Index{
typedef struct r8192_priv {
struct usb_device *udev;
- //added for maintain info from eeprom
+ /* For maintain info from eeprom */
short epromtype;
u16 eeprom_vid;
u16 eeprom_pid;
@@ -852,8 +894,10 @@ typedef struct r8192_priv {
int irq;
struct ieee80211_device *ieee80211;
- short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
- u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
+ /* O: rtl8192, 1: rtl8185 V B/C, 2: rtl8185 V D */
+ short card_8192;
+ /* If TCR reports card V B/C, this discriminates */
+ u8 card_8192_version;
short enable_gpio0;
enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
short hw_plcp_len;
@@ -870,12 +914,13 @@ typedef struct r8192_priv {
short up;
- short crcmon; //if 1 allow bad crc frame reception in monitor mode
+ /* If 1, allow bad crc frame, reception in monitor mode */
+ short crcmon;
struct semaphore wx_sem;
- struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
+ struct semaphore rf_sem; /* Used to lock rf write operation */
- u8 rf_type; //0 means 1T2R, 1 means 2T4R
+ u8 rf_type; /* 0: 1T2R, 1: 2T4R */
RT_RF_TYPE_819xU rf_chip;
short (*rf_set_sens)(struct net_device *dev,short sens);
@@ -883,46 +928,45 @@ typedef struct r8192_priv {
void (*rf_close)(struct net_device *dev);
void (*rf_init)(struct net_device *dev);
short promisc;
- /*stats*/
+ /* Stats */
struct Stats stats;
struct iw_statistics wstats;
- /*RX stuff*/
+ /* RX stuff */
struct urb **rx_urb;
struct urb **rx_cmd_urb;
#ifdef THOMAS_BEACON
u32 *oldaddr;
#endif
#ifdef THOMAS_TASKLET
- atomic_t irt_counter;//count for irq_rx_tasklet
+ atomic_t irt_counter; /* count for irq_rx_tasklet */
#endif
#ifdef JACKSON_NEW_RX
struct sk_buff **pp_rxskb;
int rx_inx;
#endif
-/* modified by davad for Rx process */
struct sk_buff_head rx_queue;
struct sk_buff_head skb_queue;
struct work_struct qos_activate;
short tx_urb_index;
- atomic_t tx_pending[0x10];//UART_PRIORITY+1
+ atomic_t tx_pending[0x10]; /* UART_PRIORITY + 1 */
struct tasklet_struct irq_rx_tasklet;
struct urb *rxurb_task;
- //2 Tx Related variables
+ /* Tx Related variables */
u16 ShortRetryLimit;
u16 LongRetryLimit;
u32 TransmitConfig;
- u8 RegCWinMin; // For turbo mode CW adaptive. Added by Annie, 2005-10-27.
+ u8 RegCWinMin; /* For turbo mode CW adaptive */
u32 LastRxDescTSFHigh;
u32 LastRxDescTSFLow;
- //2 Rx Related variables
+ /* Rx Related variables */
u16 EarlyRxThreshold;
u32 ReceiveConfig;
u8 AcmControl;
@@ -937,13 +981,13 @@ typedef struct r8192_priv {
struct work_struct reset_wq;
/**********************************************************/
- //for rtl819xUsb
+ /* For rtl819xUsb */
u16 basic_rate;
u8 short_preamble;
u8 slot_time;
bool bDcut;
bool bCurrentRxAggrEnable;
- u8 Rf_Mode; //add for Firmware RF -R/W switch
+ u8 Rf_Mode; /* For Firmware RF -R/W switch */
prt_firmware pFirmware;
rtl819xUsb_loopback_e LoopbackMode;
u16 EEPROMTxPowerDiff;
@@ -951,71 +995,70 @@ typedef struct r8192_priv {
u8 EEPROMPwDiff;
u8 EEPROMCrystalCap;
u8 EEPROM_Def_Ver;
- u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
+ u8 EEPROMTxPowerLevelCCK; /* CCK channel 1~14 */
u8 EEPROMTxPowerLevelCCK_V1[3];
- u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
- u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G
+ u8 EEPROMTxPowerLevelOFDM24G[3]; /* OFDM 2.4G channel 1~14 */
+ u8 EEPROMTxPowerLevelOFDM5G[24]; /* OFDM 5G */
-/*PHY related*/
- BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D
- // Read/write are allow for following hardware information variables
+ /* PHY related */
+ BB_REGISTER_DEFINITION_T PHYRegDef[4]; /* Radio A/B/C/D */
+ /* Read/write are allow for following hardware information variables */
u32 MCSTxPowerLevelOriginalOffset[6];
u32 CCKTxPowerLevelOriginalOffset;
- u8 TxPowerLevelCCK[14]; // CCK channel 1~14
- u8 TxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
- u8 TxPowerLevelOFDM5G[14]; // OFDM 5G
+ u8 TxPowerLevelCCK[14]; /* CCK channel 1~14 */
+ u8 TxPowerLevelOFDM24G[14]; /* OFDM 2.4G channel 1~14 */
+ u8 TxPowerLevelOFDM5G[14]; /* OFDM 5G */
u32 Pwr_Track;
u8 TxPowerDiff;
- u8 AntennaTxPwDiff[2]; // Antenna gain offset, index 0 for B, 1 for C, and 2 for D
- u8 CrystalCap; // CrystalCap.
- u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+ u8 AntennaTxPwDiff[2]; /* Antenna gain offset, 0: B, 1: C, 2: D */
+ u8 CrystalCap;
+ u8 ThermalMeter[2]; /* index 0: RFIC0, index 1: RFIC1 */
u8 CckPwEnl;
- // Use to calculate PWBD.
+ /* Use to calculate PWBD */
u8 bCckHighPower;
long undecorated_smoothed_pwdb;
- //for set channel
+ /* For set channel */
u8 SwChnlInProgress;
u8 SwChnlStage;
u8 SwChnlStep;
u8 SetBWModeInProgress;
HT_CHANNEL_WIDTH CurrentChannelBW;
u8 ChannelPlan;
- // 8190 40MHz mode
- //
- u8 nCur40MhzPrimeSC; // Control channel sub-carrier
- // Joseph test for shorten RF configuration time.
- // We save RF reg0 in this variable to reduce RF reading.
- //
+ /* 8190 40MHz mode */
+ /* Control channel sub-carrier */
+ u8 nCur40MhzPrimeSC;
+ /* Test for shorten RF configuration time.
+ * We save RF reg0 in this variable to reduce RF reading. */
u32 RfReg0Value[4];
u8 NumTotalRFPath;
bool brfpath_rxenable[4];
- //RF set related
+ /* RF set related */
bool SetRFPowerStateInProgress;
-//+by amy 080507
struct timer_list watch_dog_timer;
-//+by amy 080515 for dynamic mechenism
- //Add by amy Tx Power Control for Near/Far Range 2008/05/15
- bool bdynamic_txpower; //bDynamicTxPower
- bool bDynamicTxHighPower; // Tx high power state
- bool bDynamicTxLowPower; // Tx low power state
+ /* For dynamic mechanism */
+ /* Tx Power Control for Near/Far Range */
+ bool bdynamic_txpower;
+ bool bDynamicTxHighPower;
+ bool bDynamicTxLowPower;
bool bLastDTPFlag_High;
bool bLastDTPFlag_Low;
bool bstore_last_dtpflag;
- bool bstart_txctrl_bydtp; //Define to discriminate on High power State or on sitesuvey to change Tx gain index
- //Add by amy for Rate Adaptive
+ /* Define to discriminate on High power State or
+ * on sitesurvey to change Tx gain index */
+ bool bstart_txctrl_bydtp;
rate_adaptive rate_adaptive;
- //Add by amy for TX power tracking
- //2008/05/15 Mars OPEN/CLOSE TX POWER TRACKING
- txbbgain_struct txbbgain_table[TxBBGainTableLength];
- u8 txpower_count;//For 6 sec do tracking again
- bool btxpower_trackingInit;
- u8 OFDM_index;
- u8 CCK_index;
- //2007/09/10 Mars Add CCK TX Power Tracking
+ /* TX power tracking
+ * OPEN/CLOSE TX POWER TRACKING */
+ txbbgain_struct txbbgain_table[TxBBGainTableLength];
+ u8 txpower_count; /* For 6 sec do tracking again */
+ bool btxpower_trackingInit;
+ u8 OFDM_index;
+ u8 CCK_index;
+ /* CCK TX Power Tracking */
ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength];
ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
u8 rfa_txpowertrackingindex;
@@ -1032,15 +1075,14 @@ typedef struct r8192_priv {
bool bcck_in_ch14;
bool btxpowerdata_readfromEEPORM;
u16 TSSI_13dBm;
- //For Backup Initial Gain
init_gain initgain_backup;
u8 DefaultInitialGain[4];
- // For EDCA Turbo mode, Added by amy 080515.
+ /* For EDCA Turbo mode */
bool bis_any_nonbepkts;
bool bcurrent_turbo_EDCA;
bool bis_cur_rdlstate;
struct timer_list fsync_timer;
- bool bfsync_processing; // 500ms Fsync timer is active or not
+ bool bfsync_processing; /* 500ms Fsync timer is active or not */
u32 rate_record;
u32 rateCountDiffRecord;
u32 ContinueDiffCount;
@@ -1049,17 +1091,14 @@ typedef struct r8192_priv {
u8 framesync;
u32 framesyncC34;
u8 framesyncMonitor;
- //Added by amy 080516 for RX related
u16 nrxAMPDU_size;
u8 nrxAMPDU_aggr_num;
- //by amy for gpio
+ /* For gpio */
bool bHwRadioOff;
- //by amy for reset_count
u32 reset_count;
bool bpbc_pressed;
- //by amy for debug
u32 txpower_checkcnt;
u32 txpower_tracking_callback_cnt;
u8 thermal_read_val[40];
@@ -1068,7 +1107,7 @@ typedef struct r8192_priv {
u32 ccktxpower_adjustcnt_ch14;
u8 tx_fwinfo_force_subcarriermode;
u8 tx_fwinfo_force_subcarrierval;
- //by amy for silent reset
+ /* For silent reset */
RESET_TYPE ResetProgress;
bool bForcedSilentReset;
bool bDisableNormalResetCheck;
@@ -1081,7 +1120,7 @@ typedef struct r8192_priv {
u16 SifsTime;
- //define work item by amy 080526
+ /* Define work item */
struct delayed_work update_beacon_wq;
struct delayed_work watch_dog_wq;
@@ -1092,23 +1131,23 @@ typedef struct r8192_priv {
struct workqueue_struct *priv_wq;
}r8192_priv;
-//for rtl8187B
+/* For rtl8187B */
typedef enum{
BULK_PRIORITY = 0x01,
LOW_PRIORITY,
NORM_PRIORITY,
VO_PRIORITY,
- VI_PRIORITY, //0x05
+ VI_PRIORITY,
BE_PRIORITY,
BK_PRIORITY,
RSVD2,
RSVD3,
- BEACON_PRIORITY, //0x0A
+ BEACON_PRIORITY,
HIGH_PRIORITY,
MANAGE_PRIORITY,
RSVD4,
RSVD5,
- UART_PRIORITY //0x0F
+ UART_PRIORITY
} priority_t;
typedef enum{
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
