Re: [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, den 28.03.2013, 09:41 +0100 schrieb Martin Fuzzey:
> On 28/03/13 08:32, Shawn Guo wrote:
> > On Wed, Mar 27, 2013 at 07:43:40PM +0100, Martin Fuzzey wrote:
> >>
> >> Maybe pinctrl entries should also be added?
> > Generally, the pinctrl entries should be added in <board>.dts.
> 
> Yes sorry I meant the pinctrl groups under the iomuxc node.

I'm not fond of putting each and every possible pin group configuration
into the dtsi. But since there is only one possibility to multiplex each
of the LVDS0 and LVDS1 pads on i.MX53, I wouldn't resist:

ldb {
	pinctrl_lvds0_1: lvds0grp-1 {
		fsl,pins = <
			730 0x80000000	/* MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 */
			732 0x80000000	/* MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK */
			734 0x80000000	/* MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 */
			736 0x80000000	/* MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 */
			738 0x80000000	/* MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 */
		>;
	};

	pinctrl_lvds1_1: lvds1grp-1 {
		fsl,pins = <
			720 0x80000000	/* MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 */
			722 0x80000000	/* MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 */
			724 0x80000000	/* MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK */
			726 0x80000000	/* MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 */
			728 0x80000000	/* MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 */
		>;
	};
};

regards
Philipp

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux