On Wed, Mar 27, 2013 at 07:43:40PM +0100, Martin Fuzzey wrote:
> On 27/03/13 18:30, Philipp Zabel wrote:
> >Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> >---
> > arch/arm/boot/dts/imx53.dtsi | 27 +++++++++++++++++++++++++++
> > 1 file changed, 27 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
> >index b07bbdcc..30aed40 100644
> >--- a/arch/arm/boot/dts/imx53.dtsi
> >+++ b/arch/arm/boot/dts/imx53.dtsi
> >@@ -511,6 +511,33 @@
> > reg = <0x53fa8000 0xc>;
> > };
> >+ ldb: ldb@53fa8008 {
> >+ #address-cells = <1>;
> >+ #size-cells = <0>;
> >+ compatible = "fsl,imx53-ldb";
> >+ reg = <0x53fa8008 0x4>;
> >+ gpr = <&gpr>;
> >+ clocks = <&clks 122>, <&clks 120>,
> >+ <&clks 115>, <&clks 116>,
> >+ <&clks 123>, <&clks 85>;
> >+ clock-names = "di0_pll", "di1_pll",
> >+ "di0_sel", "di1_sel",
> >+ "di0", "di1";
> >+ status = "disabled";
> >+
> >+ lvds-channel@0 {
> >+ reg = <0>;
> >+ crtcs = <&ipu 0>;
> >+ status = "disabled";
> >+ };
> >+
> >+ lvds-channel@1 {
> >+ reg = <1>;
> >+ crtcs = <&ipu 1>;
> >+ status = "disabled";
> >+ };
> >+ };
> >+
> > pwm1: pwm@53fb4000 {
> > #pwm-cells = <2>;
> > compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
> Maybe pinctrl entries should also be added?
Generally, the pinctrl entries should be added in <board>.dts.
Shawn
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
