On 10/29/2012 12:20 PM, Christian Lamparter wrote:
On Monday, October 29, 2012 05:39:28 PM Albert Pool wrote:
Can any of you help me identify the Realtek chip in this device so that the USB ID can be added to the right driver?
It's a 802.11n USB nano dongle from ISY. I only have the dongle for short time, so I may not be able to test it
myself if it takes some time. usb-devices and lsusb -v output is attached.
Is it a ISY IWL 2000 device? Then it could be supported by rtl8192cu:
<http://forum.ubuntuusers.de/topic/isy-iwl-2000-n150-standard-wird-nicht-erkannt/#post-4641162>
Note:
you'll have to have to correct firmware in place as well. Either
you have to install a realtek firmware package (rtlwifi) for your
distro... Or download it manually (filename: rtlwifi/rtl8192cufw.bin
<http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git>)
and put it into the correct place (/lib/firmware/(rtlwifi))
Regards,
Chr
---
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 9970c2b..d4338fd 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
/*=== Customer ID ===*/
/****** 8188CU ********/
{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
+ {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
You also need a kernel 2.6.39 or newer. If you have one older that 3.4, I would
suggest using compat-wireless.
Larry
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
