DEBUG_EEPROM is not defined anywhere and these messages are just
noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/daqboard2000.c | 22 +++-------------------
1 file changed, 3 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 22d4733..436229d 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -542,31 +542,18 @@ static int initialize_daqboard2000(struct comedi_device *dev,
/* Check to make sure the serial eeprom is present on the board */
secr = readl(devpriv->plx + 0x6c);
- if (!(secr & DAQBOARD2000_EEPROM_PRESENT)) {
-#ifdef DEBUG_EEPROM
- dev_dbg(dev->class_dev, "no serial eeprom\n");
-#endif
+ if (!(secr & DAQBOARD2000_EEPROM_PRESENT))
return -EIO;
- }
for (retry = 0; retry < 3; retry++) {
-#ifdef DEBUG_EEPROM
- dev_dbg(dev->class_dev, "Programming EEPROM try %x\n", retry);
-#endif
-
daqboard2000_resetLocalBus(dev);
daqboard2000_reloadPLX(dev);
daqboard2000_pulseProgPin(dev);
if (daqboard2000_pollCPLD(dev, DAQBOARD2000_CPLD_INIT)) {
for (i = 0; i < len; i++) {
- if (cpld_array[i] == 0xff
- && cpld_array[i + 1] == 0x20) {
-#ifdef DEBUG_EEPROM
- dev_dbg(dev->class_dev,
- "Preamble found at %d\n", i);
-#endif
+ if (cpld_array[i] == 0xff &&
+ cpld_array[i + 1] == 0x20)
break;
- }
}
for (; i < len; i += 2) {
int data =
@@ -575,9 +562,6 @@ static int initialize_daqboard2000(struct comedi_device *dev,
break;
}
if (i >= len) {
-#ifdef DEBUG_EEPROM
- dev_dbg(dev->class_dev, "Programmed\n");
-#endif
daqboard2000_resetLocalBus(dev);
daqboard2000_reloadPLX(dev);
result = 0;
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
