They are commented out and are are just noise anyway.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/daqboard2000.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 032be98..22d4733 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -336,7 +336,6 @@ static void setup_sampling(struct comedi_device *dev, int chan, int gain)
/* These should be read from EEPROM */
word2 |= 0x0800;
word3 |= 0xc000;
-/* printk("%d %4.4x %4.4x %4.4x %4.4x\n", chan, word0, word1, word2, word3);*/
writeAcqScanListEntry(dev, word0);
writeAcqScanListEntry(dev, word1);
writeAcqScanListEntry(dev, word2);
@@ -607,7 +606,6 @@ static int daqboard2000_upload_firmware(struct comedi_device *dev)
static void daqboard2000_adcStopDmaTransfer(struct comedi_device *dev)
{
-/* printk("Implement: daqboard2000_adcStopDmaTransfer\n");*/
}
static void daqboard2000_adcDisarm(struct comedi_device *dev)
@@ -648,7 +646,6 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
break;
udelay(2);
}
-/* printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/
/* Set the - reference dac value in the FPGA */
writew(0x80 | DAQBOARD2000_NegRefDacSelect, devpriv->daq + refDacs);
@@ -658,22 +655,18 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
break;
udelay(2);
}
-/* printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/
}
static void daqboard2000_initializeCtrs(struct comedi_device *dev)
{
-/* printk("Implement: daqboard2000_initializeCtrs\n");*/
}
static void daqboard2000_initializeTmrs(struct comedi_device *dev)
{
-/* printk("Implement: daqboard2000_initializeTmrs\n");*/
}
static void daqboard2000_dacDisarm(struct comedi_device *dev)
{
-/* printk("Implement: daqboard2000_dacDisarm\n");*/
}
static void daqboard2000_initializeAdc(struct comedi_device *dev)
@@ -768,24 +761,12 @@ static int daqboard2000_attach_pci(struct comedi_device *dev,
readl(devpriv->plx + 0x6c);
- /*
- u8 interrupt;
- Windows code does restore interrupts, but since we don't use them...
- pci_read_config_byte(pcidev, PCI_INTERRUPT_LINE, &interrupt);
- printk("Interrupt before is: %x\n", interrupt);
- */
-
result = daqboard2000_upload_firmware(dev);
if (result < 0)
return result;
daqboard2000_initializeAdc(dev);
daqboard2000_initializeDac(dev);
- /*
- Windows code does restore interrupts, but since we don't use them...
- pci_read_config_byte(pcidev, PCI_INTERRUPT_LINE, &interrupt);
- printk("Interrupt after is: %x\n", interrupt);
- */
s = &dev->subdevices[0];
/* ai subdevice */
--
1.7.11
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
