Implement the attach_pci() hook as function pc236_attach_pci(). This is
called bu comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pc236_attach()) and avoids searching for the probed
PCI device.
Factor out code common to pc236_find_pci() and pc236_attach_pci() into
new function pc236_find_pci_board(). Factor out most code common to
pc236_attach() and pc236_attach_pci() into new functions
pc236_pci_common_attach() and pc236_common_attach().
Also #if out member 'devid' from struct pc236_board unless PCI boards
are supported as it is not used for ISA boards.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/amplc_pc236.c | 220 +++++++++++++++-----------
1 files changed, 129 insertions(+), 91 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 118fced..e0960ce 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -100,7 +100,9 @@ enum pc236_model { pc36at_model, pci236_model, anypci_model };
struct pc236_board {
const char *name;
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
unsigned short devid;
+#endif
enum pc236_bustype bustype;
enum pc236_model model;
};
@@ -142,6 +144,22 @@ struct pc236_private {
};
/*
+ * This function looks for a board matching the supplied PCI device.
+ */
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+static const struct pc236_board *pc236_find_pci_board(struct pci_dev *pci_dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pc236_boards); i++)
+ if (pc236_boards[i].bustype == pci_bustype &&
+ pci_dev->device == pc236_boards[i].devid)
+ return &pc236_boards[i];
+ return NULL;
+}
+#endif
+
+/*
* This function looks for a PCI device matching the requested board name,
* bus and slot.
*/
@@ -164,21 +182,13 @@ pc236_find_pci(struct comedi_device *dev, int bus, int slot)
continue;
}
if (thisboard->model == anypci_model) {
- /* Match any supported model. */
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pc236_boards); i++) {
- if (pc236_boards[i].bustype != pci_bustype)
- continue;
- if (pci_dev->device == pc236_boards[i].devid) {
- /* Change board_ptr to matched board. */
- dev->board_ptr = &pc236_boards[i];
- thisboard = comedi_board(dev);
- break;
- }
- }
- if (i == ARRAY_SIZE(pc236_boards))
+ /* Wildcard board matches any supported PCI board. */
+ const struct pc236_board *foundboard;
+ foundboard = pc236_find_pci_board(pci_dev);
+ if (foundboard == NULL)
continue;
+ /* Replace wildcard board_ptr. */
+ dev->board_ptr = thisboard = foundboard;
} else {
/* Match specific model name. */
if (pci_dev->device != thisboard->devid)
@@ -460,86 +470,14 @@ static void pc236_report_attach(struct comedi_device *dev, unsigned int irq)
dev->board_name, tmpbuf);
}
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board. If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int pc236_common_attach(struct comedi_device *dev, unsigned long iobase,
+ unsigned int irq, unsigned long req_irq_flags)
{
const struct pc236_board *thisboard = comedi_board(dev);
struct comedi_subdevice *s;
- unsigned long iobase = 0;
- unsigned int irq = 0;
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
- struct pc236_private *devpriv = dev->private;
- struct pci_dev *pci_dev = NULL;
- int bus = 0, slot = 0;
-#endif
- int share_irq = 0;
int ret;
- dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach\n");
- ret = alloc_private(dev, sizeof(struct pc236_private));
- if (ret < 0) {
- dev_err(dev->class_dev, "error! out of memory!\n");
- return ret;
- }
- /* Process options. */
- switch (thisboard->bustype) {
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
- case isa_bustype:
- iobase = it->options[0];
- irq = it->options[1];
- share_irq = 0;
- break;
-#endif
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
- case pci_bustype:
- bus = it->options[0];
- slot = it->options[1];
- share_irq = 1;
-
- pci_dev = pc236_find_pci(dev, bus, slot);
- if (pci_dev == NULL)
- return -EIO;
- thisboard = comedi_board(dev); /* replaced wildcard board */
- devpriv->pci_dev = pci_dev;
- break;
-#endif
- default:
- dev_err(dev->class_dev, PC236_DRIVER_NAME
- ": BUG! cannot determine board type!\n");
- return -EINVAL;
- break;
- }
-
- /* Initialize dev->board_name. */
dev->board_name = thisboard->name;
-
- /* Enable device and reserve I/O spaces. */
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
- if (pci_dev) {
-
- ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
- if (ret < 0) {
- dev_err(dev->class_dev,
- "error! cannot enable PCI device and request regions!\n");
- return ret;
- }
- devpriv->lcr_iobase = pci_resource_start(pci_dev, 1);
- iobase = pci_resource_start(pci_dev, 2);
- irq = pci_dev->irq;
- } else
-#endif
- {
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
- ret = pc236_request_region(dev, iobase, PC236_IO_SIZE);
- if (ret < 0)
- return ret;
-#endif
- }
dev->iobase = iobase;
ret = alloc_subdevices(dev, 2);
@@ -560,9 +498,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s->type = COMEDI_SUBD_UNUSED;
pc236_intr_disable(dev);
if (irq) {
- unsigned long flags = share_irq ? IRQF_SHARED : 0;
-
- if (request_irq(irq, pc236_interrupt, flags,
+ if (request_irq(irq, pc236_interrupt, req_irq_flags,
PC236_DRIVER_NAME, dev) >= 0) {
dev->irq = irq;
s->type = COMEDI_SUBD_DI;
@@ -580,6 +516,105 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return 1;
}
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+static int pc236_pci_common_attach(struct comedi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ struct pc236_private *devpriv = dev->private;
+ unsigned long iobase;
+ int ret;
+
+ devpriv->pci_dev = pci_dev;
+ ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev->class_dev,
+ "error! cannot enable PCI device and request regions!\n");
+ return ret;
+ }
+ devpriv->lcr_iobase = pci_resource_start(pci_dev, 1);
+ iobase = pci_resource_start(pci_dev, 2);
+ return pc236_common_attach(dev, iobase, pci_dev->irq, IRQF_SHARED);
+}
+#endif
+
+/*
+ * Attach is called by the Comedi core to configure the driver
+ * for a particular board. If you specified a board_name array
+ * in the driver structure, dev->board_ptr contains that
+ * address.
+ */
+static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+ const struct pc236_board *thisboard = comedi_board(dev);
+ int ret;
+
+ dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach\n");
+ ret = alloc_private(dev, sizeof(struct pc236_private));
+ if (ret < 0) {
+ dev_err(dev->class_dev, "error! out of memory!\n");
+ return ret;
+ }
+ /* Process options according to bus type. */
+ switch (thisboard->bustype) {
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
+ case isa_bustype: {
+ unsigned long iobase = it->options[0];
+ unsigned int irq = it->options[1];
+ ret = pc236_request_region(dev, iobase, PC236_IO_SIZE);
+ if (ret < 0)
+ return ret;
+ return pc236_common_attach(dev, iobase, irq, 0);
+ }
+ break;
+#endif
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+ case pci_bustype: {
+ int bus = it->options[0];
+ int slot = it->options[1];
+ struct pci_dev *pci_dev;
+
+ pci_dev = pc236_find_pci(dev, bus, slot);
+ if (pci_dev == NULL)
+ return -EIO;
+ return pc236_pci_common_attach(dev, pci_dev);
+ }
+ break;
+#endif
+ default:
+ dev_err(dev->class_dev, PC236_DRIVER_NAME
+ ": BUG! cannot determine board type!\n");
+ break;
+ }
+ return -EINVAL;
+}
+
+/*
+ * The attach_pci hook (if non-NULL) is called at PCI probe time in preference
+ * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should
+ * be a board entry matching the supplied PCI device.
+ */
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+static int __devinit pc236_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ int ret;
+
+ dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach pci %s\n",
+ pci_name(pci_dev));
+ ret = alloc_private(dev, sizeof(struct pc236_private));
+ if (ret < 0) {
+ dev_err(dev->class_dev, "error! out of memory!\n");
+ return ret;
+ }
+ dev->board_ptr = pc236_find_pci_board(pci_dev);
+ if (dev->board_ptr == NULL) {
+ dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
+ return -EINVAL;
+ }
+ return pc236_pci_common_attach(dev, pci_dev);
+}
+#endif
+
static void pc236_detach(struct comedi_device *dev)
{
struct pc236_private *devpriv = dev->private;
@@ -617,6 +652,9 @@ static struct comedi_driver amplc_pc236_driver = {
.driver_name = PC236_DRIVER_NAME,
.module = THIS_MODULE,
.attach = pc236_attach,
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+ .attach_pci = pc236_attach_pci,
+#endif
.detach = pc236_detach,
.board_name = &pc236_boards[0].name,
.offset = sizeof(struct pc236_board),
--
1.7.8.6
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
