This is a patch to the cb_pcidas64.c file that fixes up a
printk warning found by the checkpatch.pl tool.
Converted printks to dev_<levels> and Removed unnecessary
printk statements.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 19 +++++++++----------
1 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 1e32419..b68c587 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1739,8 +1739,6 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
uint32_t local_range, local_decode;
int retval;
- printk("comedi%d: cb_pcidas64\n", dev->minor);
-
/*
* Allocate the private structure area.
*/
@@ -1781,12 +1779,11 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
}
- printk("Found %s on bus %i, slot %i\n", board(dev)->name,
- pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+ dev_dbg(dev->hw_dev, "Found %s on bus %i, slot %i\n", board(dev)->name,
+ pcidev->bus->number, PCI_SLOT(pcidev->devfn));
if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) {
- printk(KERN_WARNING
- " failed to enable PCI device and request regions\n");
+ dev_warn(dev->hw_dev, "failed to enable PCI device and request regions\n");
return -EIO;
}
pci_set_master(pcidev);
@@ -1814,7 +1811,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase
|| !priv(dev)->dio_counter_iobase) {
- printk(" failed to remap io memory\n");
+ dev_warn(dev->hw_dev, "failed to remap io memory\n");
return -ENOMEM;
}
@@ -1850,17 +1847,19 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
priv(dev)->hw_revision =
hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG));
- printk(" stc hardware revision %i\n", priv(dev)->hw_revision);
+ dev_dbg(dev->hw_dev, "stc hardware revision %i\n",
+ priv(dev)->hw_revision);
init_plx9080(dev);
init_stc_registers(dev);
/* get irq */
if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
"cb_pcidas64", dev)) {
- printk(" unable to allocate irq %u\n", pcidev->irq);
+ dev_dbg(dev->hw_dev, "unable to allocate irq %u\n",
+ pcidev->irq);
return -EINVAL;
}
dev->irq = pcidev->irq;
- printk(" irq %u\n", dev->irq);
+ dev_dbg(dev->hw_dev, "irq %u\n", dev->irq);
retval = setup_subdevices(dev);
if (retval < 0)
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
