[PATCH 5/5] Staging: comedi: fix warning issue in unioxx5.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ravishankar <ravi.shankar@xxxxxxxxxxxxxxx>

This is a patch to the unioxx5.c file that fixes up a  warning:line over 80 charcter found by the checkpatch.pl tool

Signed-off-by: Ravishankar <ravishankarkm32@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/unioxx5.c |   25 ++++++++++++++++++-------
 1 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 598884e..9b311c7 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -75,8 +75,13 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5),
 /* 'private' structure for each subdevice */
 struct unioxx5_subd_priv {
 	int usp_iobase;
-	unsigned char usp_module_type[12];	/* 12 modules. each can be 70L or 73L */
-	unsigned char usp_extra_data[12][4];	/* for saving previous written value for analog modules */
+	unsigned char usp_module_type[12];	/* 12 modules. each can be 70L
+						 * or 73L
+						*/
+	unsigned char usp_extra_data[12][4];	/* for saving previous written
+						 * value for analog modules
+						*/
+
 	unsigned char usp_prev_wr_val[3];	/* previous written value */
 	unsigned char usp_prev_cn_val[3];	/* previous channel value */
 };
@@ -398,7 +402,10 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
 	*data &= mask;
 
 	if (channel_offset > 1)
-		channel -= 2 << channel_offset;	/* this operation is created for correct readed value to 0 or 1 */
+		channel -= 2 << channel_offset;	/* this operation is created for
+						 * correct readed value to
+						 * 0 or 1
+						*/
 
 	*data >>= channel;
 	return 1;
@@ -444,7 +451,9 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
 	usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);
 
 	/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
-	outb(module + 1, usp->usp_iobase + 5);	/* sending module number to card(1 .. 12) */
+	outb(module + 1, usp->usp_iobase + 5);	/* sending module number
+						 * to card (1..12)
+						*/
 	outb('W', usp->usp_iobase + 6);	/* sends (W)rite command to module */
 
 	/* sending for bytes to module(one byte per cycle iteration) */
@@ -475,7 +484,9 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
 	}
 
 	__unioxx5_analog_config(usp, channel);
-	outb(module_no + 1, usp->usp_iobase + 5);	/* sends module number to card(1 .. 12) */
+	outb(module_no + 1, usp->usp_iobase + 5);	/* sends module number
+							 * to card (1. .12)
+							*/
 	outb('V', usp->usp_iobase + 6);	/* sends to module (V)erify command */
 	control = inb(usp->usp_iobase);	/* get control register byte */
 
-- 
1.6.5.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux