On Mon, 2021-03-01 at 16:17 +0100, Benjamin Gaignard wrote:
> Rather use a reset like feature inside the driver use the reset
> controller API to get the same result.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
> ---
> drivers/staging/media/hantro/Kconfig | 1 +
> drivers/staging/media/hantro/imx8m_vpu_hw.c | 61 ++++-----------------
> 2 files changed, 12 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/staging/media/hantro/Kconfig b/drivers/staging/media/hantro/Kconfig
> index 5b6cf9f62b1a..dd1d4dde2658 100644
> --- a/drivers/staging/media/hantro/Kconfig
> +++ b/drivers/staging/media/hantro/Kconfig
> @@ -20,6 +20,7 @@ config VIDEO_HANTRO_IMX8M
> bool "Hantro VPU i.MX8M support"
> depends on VIDEO_HANTRO
> depends on ARCH_MXC || COMPILE_TEST
> + select RESET_VPU_IMX8MQ
> default y
> help
> Enable support for i.MX8M SoCs.
> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> index c222de075ef4..d5b4312b9391 100644
> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> @@ -7,49 +7,12 @@
>
> #include <linux/clk.h>
> #include <linux/delay.h>
> +#include <linux/reset.h>
>
> #include "hantro.h"
> #include "hantro_jpeg.h"
> #include "hantro_g1_regs.h"
>
> -#define CTRL_SOFT_RESET 0x00
> -#define RESET_G1 BIT(1)
> -#define RESET_G2 BIT(0)
> -
> -#define CTRL_CLOCK_ENABLE 0x04
> -#define CLOCK_G1 BIT(1)
> -#define CLOCK_G2 BIT(0)
> -
> -#define CTRL_G1_DEC_FUSE 0x08
> -#define CTRL_G1_PP_FUSE 0x0c
> -#define CTRL_G2_DEC_FUSE 0x10
> -
> -static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
> -{
> - u32 val;
> -
> - /* Assert */
> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> - val &= ~reset_bits;
> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> -
> - udelay(2);
> -
> - /* Release */
> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> - val |= reset_bits;
> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> -}
> -
> -static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
> -{
> - u32 val;
> -
> - val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> - val |= clock_bits;
> - writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
The way it is implemented in the reset driver, the clocks are now
ungated between assert and deassert instead of afterwards. Is this on
purpose?
regards
Philipp
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
