The two VPUs inside IMX8MQ share the same control block which can be see as a reset hardware block. In order to be able to add the second VPU (for HECV decoding) it will be more handy if the both VPU drivers instance don't have to share the control block registers. This lead to implement it as an independ reset driver and to change the VPU driver to use it. Please note that this series break the compatibility between the DTB and kernel. This break is limited to IMX8MQ SoC and is done when the driver is still in staging directory. version 3: - Fix error in VPU example node version 2: - Document the change in VPU bindings Benjamin Gaignard (5): dt-bindings: reset: IMX8MQ VPU reset dt-bindings: media: IMX8MQ VPU: document reset usage reset: Add reset driver for IMX8MQ VPU block media: hantro: Use reset driver arm64: dts: imx8mq: Use reset driver for VPU hardware block .../bindings/media/nxp,imx8mq-vpu.yaml | 14 +- .../bindings/reset/fsl,imx8mq-vpu-reset.yaml | 54 ++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 31 +++- drivers/reset/Kconfig | 8 + drivers/reset/Makefile | 1 + drivers/reset/reset-imx8mq-vpu.c | 169 ++++++++++++++++++ drivers/staging/media/hantro/Kconfig | 1 + drivers/staging/media/hantro/imx8m_vpu_hw.c | 61 ++----- include/dt-bindings/reset/imx8mq-vpu-reset.h | 16 ++ 9 files changed, 294 insertions(+), 61 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx8mq-vpu-reset.yaml create mode 100644 drivers/reset/reset-imx8mq-vpu.c create mode 100644 include/dt-bindings/reset/imx8mq-vpu-reset.h -- 2.25.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
