Add documentation for the properties needed by the HiSilicon 6421v600 driver, and by the SPMI controller used to access the chipset. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 159 ++++++++++++++++++ .../hisilicon,hisi-spmi-controller.yaml | 62 +++++++ 2 files changed, 221 insertions(+) create mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml create mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml new file mode 100644 index 000000000000..c76093f320f1 --- /dev/null +++ b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon 6421v600 SPMI PMIC + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> + +description: | + HiSilicon 6421v600 should be connected inside a MIPI System Power Management + (SPMI) bus. It provides interrupts and power supply. + + The GPIO and interrupt settings are represented as part of the top-level PMIC + node. + + The SPMI controller part is provided by + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml. + +properties: + $nodename: + pattern: "pmic@[0-9a-f]" + + compatible: + const: hisilicon,hi6421v600-spmi + + reg: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: + description: + Identify that the PMIC is capable of behaving as an interrupt controller. + + gpios: + maxItems: 1 + + regulators: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^ldo[0-9]+@[0-9a-f]$': + type: object + + $ref: "/schemas/regulator/regulator.yaml#" + + properties: + reg: + description: Enable register. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + vsel-reg: + description: Voltage selector register. + + enable-mask: + description: Bitmask used to enable the regulator. + + voltage-table: + description: Table with the selector items for the voltage regulator. + minItems: 2 + maxItems: 16 + + off-on-delay-us: + description: Time required for changing state to enabled in microseconds. + + startup-delay-us: + description: Startup time in microseconds. + + idle-mode-mask: + description: Bitmask used to put the regulator on idle mode. + + eco-microamp: + description: Maximum current while on idle mode. + + required: + - reg + - vsel-reg + - enable-mask + - voltage-table + - off-on-delay-us + - startup-delay-us + +required: + - compatible + - reg + - regulators + +examples: + - | + /* pmic properties */ + + pmic: pmic@0 { + compatible = "hisilicon,hi6421-spmi"; + reg = <0 0>; + + #interrupt-cells = <2>; + interrupt-controller; + gpios = <&gpio28 0 0>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3@16 { + reg = <0x16>; + vsel-reg = <0x51>; + + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + + enable-mask = <0x01>; + + voltage-table = <1500000>, <1550000>, <1600000>, <1650000>, + <1700000>, <1725000>, <1750000>, <1775000>, + <1800000>, <1825000>, <1850000>, <1875000>, + <1900000>, <1925000>, <1950000>, <2000000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo4: ldo4@17 { /* 40 PIN */ + reg = <0x17>; + vsel-reg = <0x52>; + + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + hi6421-vsel = <0x52 0x07>; + voltage-table = <1725000>, <1750000>, <1775000>, <1800000>, + <1825000>, <1850000>, <1875000>, <1900000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + }; + }; diff --git a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml new file mode 100644 index 000000000000..b1cfa9c3aca6 --- /dev/null +++ b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon SPMI controller + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> + +description: | + The HiSilicon SPMI BUS controller is found on some Kirin-based designs. + It is a MIPI System Power Management (SPMI) controller. + + The PMIC part is provided by + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + +properties: + $nodename: + pattern: "spmi@[0-9a-f]" + + compatible: + const: hisilicon,kirin970-spmi-controller + + reg: + maxItems: 1 + + spmi-channel: + description: | + number of the Kirin 970 SPMI channel where the SPMI devices are connected. + +required: + - compatible + - reg + - spmi-channel + +patternProperties: + "^pmic@[0-9a-f]$": + description: | + PMIC properties, which are specific to the used SPMI PMIC device(s). + When used in combination with HiSilicon 6421v600, the properties + are documented at + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + status = "ok"; + reg = <0x0 0xfff24000 0x0 0x1000>; + spmi-channel = <2>; + + pmic@0 { + /* pmic properties */ + }; + }; + }; -- 2.26.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
