On Wed, 29 Jul 2020 13:38:28 +0300 Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote: > On Wed, Jul 29, 2020 at 11:12 AM Ankit Baluni > <b18007@xxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > > Added a missing comma and changed 'it it useful' to 'it is useful'. > > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Gah. I had kind of forgotten these docs existed and they have rotted pretty badly from a quick glance. Sometime soon I'll take a look and see if there is anything worth moving over to the main docs. In meantime, nothing wrong with cleaning them up a little as you Ankit has done here. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to ignore them. Thanks, Jonathan > > > Signed-off-by: Ankit Baluni <b18007@xxxxxxxxxxxxxxxxxxxxxxx> > > --- > > Changes in -v2: > > -Remove space before ':' in subject line. > > > > drivers/staging/iio/Documentation/overview.txt | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt > > index ebdc64f451d7..00409d5dab4e 100644 > > --- a/drivers/staging/iio/Documentation/overview.txt > > +++ b/drivers/staging/iio/Documentation/overview.txt > > @@ -9,7 +9,7 @@ The aim is to fill the gap between the somewhat similar hwmon and > > input subsystems. Hwmon is very much directed at low sample rate > > sensors used in applications such as fan speed control and temperature > > measurement. Input is, as its name suggests focused on input > > -devices. In some cases there is considerable overlap between these and > > +devices. In some cases, there is considerable overlap between these and > > IIO. > > > > A typical device falling into this category would be connected via SPI > > @@ -38,7 +38,7 @@ series and Analog Devices ADXL345 accelerometers. Each buffer supports > > polling to establish when data is available. > > > > * Trigger and software buffer support. In many data analysis > > -applications it it useful to be able to capture data based on some > > +applications it is useful to be able to capture data based on some > > external signal (trigger). These triggers might be a data ready > > signal, a gpio line connected to some external system or an on > > processor periodic interrupt. A single trigger may initialize data > > -- > > 2.25.1 > > > > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
