Re: [PATCH 6/6] staging: qlge: qlge_ethtool: Remove one byte memset.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-07-15 at 00:36 +0530, Suraj Upadhyay wrote:
> On Tue, Jul 14, 2020 at 11:57:23AM -0700, Joe Perches wrote:
> > On Mon, 2020-07-13 at 17:17 +0300, Dan Carpenter wrote:
> > > On Mon, Jul 13, 2020 at 05:52:22PM +0530, Suraj Upadhyay wrote:
> > > > Use direct assignment instead of using memset with just one byte as an
> > > > argument.
> > > > Issue found by checkpatch.pl.
> > > > 
> > > > Signed-off-by: Suraj Upadhyay <usuraj35@xxxxxxxxx>
> > > > ---
> > > > Hii Maintainers,
> > > > 	Please correct me if I am wrong here.
> > > > ---
> > > > 
> > > >  drivers/staging/qlge/qlge_ethtool.c | 4 ++--
> > > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/staging/qlge/qlge_ethtool.c b/drivers/staging/qlge/qlge_ethtool.c
> > > > index 16fcdefa9687..d44b2dae9213 100644
> > > > --- a/drivers/staging/qlge/qlge_ethtool.c
> > > > +++ b/drivers/staging/qlge/qlge_ethtool.c
> > > > @@ -516,8 +516,8 @@ static void ql_create_lb_frame(struct sk_buff *skb,
> > > >  	memset(skb->data, 0xFF, frame_size);
> > > >  	frame_size &= ~1;
> > > >  	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
> > > > -	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
> > > > -	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
> > > > +	skb->data[frame_size / 2 + 10] = (unsigned char)0xBE;
> > > > +	skb->data[frame_size / 2 + 12] = (unsigned char)0xAF;
> > > 
> > > Remove the casting.
> > > 
> > > I guess this is better than the original because now it looks like
> > > ql_check_lb_frame().  It's still really weird looking though.
> > 
> > There are several of these in the intel drivers too:
> > 
> > drivers/net/ethernet/intel/e1000/e1000_ethtool.c:       memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
> > drivers/net/ethernet/intel/e1000/e1000_ethtool.c:       memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
> > drivers/net/ethernet/intel/e1000e/ethtool.c:    memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
> > drivers/net/ethernet/intel/e1000e/ethtool.c:    memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
> > drivers/net/ethernet/intel/igb/igb_ethtool.c:   memset(&skb->data[frame_size + 10], 0xBE, 1);
> > drivers/net/ethernet/intel/igb/igb_ethtool.c:   memset(&skb->data[frame_size + 12], 0xAF, 1);
> > drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:       memset(&skb->data[frame_size + 10], 0xBE, 1);
> > drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:       memset(&skb->data[frame_size + 12], 0xAF, 1);
> > drivers/staging/qlge/qlge_ethtool.c:    memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
> > drivers/staging/qlge/qlge_ethtool.c:    memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
> 
> Thanks to point this out,
> 	I will be sending a patchset for that soon.


It _might_ be useful to create and use a standard
mechanism for the loopback functions:

	<foo>create_lbtest_frame
and
	<foo>check_lbtest_frame

Maybe use something like:

	ether_loopback_frame_create
and
	ether_loopback_frame_check


_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux