Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188e_hal_init_old.o rtl8188e_hal_init.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
.../staging/rtl8188eu/hal/rtl8188e_hal_init.c | 44 +++++++++----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 57ae0e83dd3e..740004d71a15 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -22,7 +22,7 @@ void iol_mode_enable(struct adapter *padapter, u8 enable)
if (enable) {
/* Enable initial offload */
reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
- usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
+ usb_write8(padapter, REG_SYS_CFG, reg_0xf0 | SW_OFFLOAD_EN);
if (!padapter->bFWReady) {
DBG_88E("bFWReady == false call reset 8051...\n");
@@ -42,9 +42,9 @@ s32 iol_execute(struct adapter *padapter, u8 control)
u8 reg_0x88 = 0;
unsigned long start = 0;
- control = control&0x0f;
+ control = control & 0x0f;
reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
- usb_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
+ usb_write8(padapter, REG_HMEBOX_E0, reg_0x88 | control);
start = jiffies;
while ((reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0)) & control &&
@@ -54,7 +54,7 @@ s32 iol_execute(struct adapter *padapter, u8 control)
reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
- if (reg_0x88 & control<<4)
+ if (reg_0x88 & control << 4)
status = _FAIL;
return status;
}
@@ -64,7 +64,7 @@ static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
s32 rst = _SUCCESS;
iol_mode_enable(padapter, 1);
- usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ usb_write8(padapter, REG_TDECTRL + 1, txpktbuf_bndy);
rst = iol_execute(padapter, CMD_INIT_LLT);
iol_mode_enable(padapter, 0);
return rst;
@@ -92,9 +92,9 @@ void _8051Reset88E(struct adapter *padapter)
{
u8 u1bTmp;
- u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN+1);
- usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT(2)));
- usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT(2)));
+ u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN + 1);
+ usb_write8(padapter, REG_SYS_FUNC_EN + 1, u1bTmp & (~BIT(2)));
+ usb_write8(padapter, REG_SYS_FUNC_EN + 1, u1bTmp | (BIT(2)));
DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
}
@@ -122,7 +122,7 @@ void rtw_hal_read_chip_version(struct adapter *padapter)
value32 = usb_read32(padapter, REG_SYS_CFG);
ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
- ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /* IC version (CUT) */
+ ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT; /* IC version (CUT) */
dump_chip_info(ChipVersion);
@@ -163,10 +163,10 @@ void rtw_hal_notch_filter(struct adapter *adapter, bool enable)
{
if (enable) {
DBG_88E("Enable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) | BIT(1));
+ usb_write8(adapter, rOFDM0_RxDSP + 1, usb_read8(adapter, rOFDM0_RxDSP + 1) | BIT(1));
} else {
DBG_88E("Disable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) & ~BIT(1));
+ usb_write8(adapter, rOFDM0_RxDSP + 1, usb_read8(adapter, rOFDM0_RxDSP + 1) & ~BIT(1));
}
}
@@ -308,7 +308,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF)
pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
}
- for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) {
+ for (group = 0; group < MAX_CHNL_GROUP_24G - 1; group++) {
pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++];
if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF)
pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
@@ -319,7 +319,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF;
} else {
- pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -327,7 +327,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF;
} else {
- pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -337,7 +337,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -345,7 +345,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -354,7 +354,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -362,7 +362,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -450,9 +450,9 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
/* 2010/10/19 MH Add Regulator recognize for CU. */
if (!AutoLoadFail) {
- pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */
+ pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x7); /* bit0~2 */
if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
- pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */
+ pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION & 0x7); /* bit0~2 */
} else {
pHalData->EEPROMRegulatory = 0;
}
@@ -532,9 +532,9 @@ void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool
if (!AutoLoadFail) {
/* Antenna Diversity setting. */
if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */
- pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3;
+ pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x18) >> 3;
if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
- pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3;
+ pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION & 0x18) >> 3;
} else {
pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */
}
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
