Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188e_cmd_old.o rtl8188e_cmd.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 42 ++++++++++----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 7646167a0b36..371e746915dd 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -113,24 +113,24 @@ void rtw_hal_add_ra_tid(struct adapter *pAdapter, u32 bitmap, u8 arg, u8 rssi_le
struct odm_dm_struct *odmpriv = &pAdapter->HalData->odmpriv;
u8 macid, init_rate, raid, shortGIrate = false;
- macid = arg&0x1f;
+ macid = arg & 0x1f;
- raid = (bitmap>>28) & 0x0f;
+ raid = (bitmap >> 28) & 0x0f;
bitmap &= 0x0fffffff;
if (rssi_level != DM_RATR_STA_INIT)
bitmap = ODM_Get_Rate_Bitmap(odmpriv, macid, bitmap, rssi_level);
- bitmap |= ((raid<<28)&0xf0000000);
+ bitmap |= ((raid << 28) & 0xf0000000);
- init_rate = get_highest_rate_idx(bitmap&0x0fffffff)&0x3f;
+ init_rate = get_highest_rate_idx(bitmap & 0x0fffffff) & 0x3f;
shortGIrate = (arg & BIT(5)) ? true : false;
if (shortGIrate)
init_rate |= BIT(6);
- raid = (bitmap>>28) & 0x0f;
+ raid = (bitmap >> 28) & 0x0f;
bitmap &= 0x0fffffff;
@@ -172,7 +172,7 @@ void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
break;
}
- H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps<<4)&0xf0) | (RLBM & 0x0f));
+ H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps << 4) & 0xf0) | (RLBM & 0x0f));
H2CSetPwrMode.AwakeInterval = 1;
@@ -239,9 +239,9 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
pframe += 2;
pktlen += 2;
- if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
+ if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
pktlen += cur_network->ie_length - sizeof(struct ndis_802_11_fixed_ie);
- memcpy(pframe, cur_network->ies+sizeof(struct ndis_802_11_fixed_ie), pktlen);
+ memcpy(pframe, cur_network->ies + sizeof(struct ndis_802_11_fixed_ie), pktlen);
goto _ConstructBeacon;
}
@@ -258,7 +258,7 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
/* DS parameter set */
pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen);
- if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) {
+ if ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) {
u32 ATIMWindow;
/* IBSS Parameter Set... */
ATIMWindow = 0;
@@ -473,7 +473,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (2) ps-poll *1 page */
RsvdPageLoc.LocPsPoll = PageNum;
ConstructPSPoll(adapt, &ReservedPagePacket[BufIndex], &PSPollLength);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], PSPollLength, true, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], PSPollLength, true, false);
PageNeed = (u8)PageNum_128(TxDescLen + PSPollLength);
PageNum += PageNeed;
@@ -483,7 +483,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (3) null data * 1 page */
RsvdPageLoc.LocNullData = PageNum;
ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex], &NullDataLength, pnetwork->MacAddress, false, 0, 0, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], NullDataLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], NullDataLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + NullDataLength);
PageNum += PageNeed;
@@ -493,7 +493,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (4) probe response * 1page */
RsvdPageLoc.LocProbeRsp = PageNum;
ConstructProbeRsp(adapt, &ReservedPagePacket[BufIndex], &ProbeRspLength, pnetwork->MacAddress, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], ProbeRspLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], ProbeRspLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + ProbeRspLength);
PageNum += PageNeed;
@@ -504,7 +504,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
RsvdPageLoc.LocQosNull = PageNum;
ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex],
&QosNullLength, pnetwork->MacAddress, true, 0, 0, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], QosNullLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], QosNullLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + QosNullLength);
PageNum += PageNeed;
@@ -546,17 +546,17 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
if (mstatus == 1) {
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
/* Suggested by filen. Added by tynli. */
- usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
+ usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000 | pmlmeinfo->aid));
/* Do not set TSF again here or vWiFi beacon DMA INT will not work. */
/* Set REG_CR bit 8. DMA beacon by SW. */
haldata->RegCR_1 |= BIT(0);
- usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR + 1, haldata->RegCR_1);
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
- usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(3)));
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(4));
if (haldata->RegFwHwTxQCtrl & BIT(6)) {
@@ -565,7 +565,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
}
/* Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT(6))));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl & (~BIT(6))));
haldata->RegFwHwTxQCtrl &= (~BIT(6));
/* Clear beacon valid check bit. */
@@ -582,7 +582,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* check rsvd page download OK. */
rtw_hal_get_hwreg(adapt, HW_VAR_BCN_VALID, (u8 *)(&bcn_valid));
poll++;
- } while (!bcn_valid && (poll%10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
+ } while (!bcn_valid && (poll % 10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
} while (!bcn_valid && DLBcnCount <= 100 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
if (adapt->bSurpriseRemoved || adapt->bDriverStopped)
@@ -600,7 +600,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Enable Bcn */
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(3));
- usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(4)));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
@@ -608,7 +608,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* the beacon cannot be sent by HW. */
/* 2010.06.23. Added by tynli. */
if (bSendBeacon) {
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl | BIT(6)));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl | BIT(6)));
haldata->RegFwHwTxQCtrl |= BIT(6);
}
@@ -621,6 +621,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
haldata->RegCR_1 &= (~BIT(0));
- usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR + 1, haldata->RegCR_1);
}
}
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
