[PATCH v2 1/2] staging: rtl8192u: Add or remove spaces to fix style issues

[Sumera Priyadarsini <sylphrenadin@xxxxxxxxx>]

This patch fixes the file r8190_rtl8256.c to avoid the following
checkpatch.pl warnings:
	CHECK: spaces preferred around that '<<' (ctx:VxV)
	CHECK: spaces preferred around that '-' (ctx:VxV)
	CHECK: No space is necessary after a cast

Signed-off-by: Sumera Priyadarsini <sylphrenadin@xxxxxxxxx>
---
Changes since v1:
- Split the commit into two patches
---
 drivers/staging/rtl8192u/r8190_rtl8256.c | 30 ++++++++++++------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 0bedf88525cd..7c7f8247b27a 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -42,9 +42,9 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
 
 		switch (Bandwidth) {
 		case HT_CHANNEL_WIDTH_20:
-				if (priv->card_8192_version == VERSION_819XU_A
-					|| priv->card_8192_version
-					== VERSION_819XU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
+				if (priv->card_8192_version == VERSION_819XU_A ||
+					priv->card_8192_version ==
+					VERSION_819XU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
 					rtl8192_phy_SetRFReg(dev,
 						(enum rf90_radio_path_e)eRFPath,
 						0x0b, bMask12Bits, 0x100); /* phy para:1ba */
@@ -137,12 +137,12 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
 			break;
 		case RF90_PATH_B:
 		case RF90_PATH_D:
-			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV << 16);
 			break;
 		}
 
 		/*----Set RF_ENV enable----*/
-		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV << 16, 0x1);
 
 		/*----Set RF_ENV output high----*/
 		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
@@ -151,7 +151,7 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
 		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0);	/* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */
 		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	/* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */
 
-		rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e) eRFPath, 0x0, bMask12Bits, 0xbf);
+		rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e)eRFPath, 0x0, bMask12Bits, 0xbf);
 
 		/* Check RF block (for FPGA platform only)----
 		 * TODO: this function should be removed on ASIC , Emily 2007.2.2
@@ -207,7 +207,7 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
 			break;
 		case RF90_PATH_B:
 		case RF90_PATH_D:
-			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV << 16, u4RegValue);
 			break;
 		}
 
@@ -255,16 +255,16 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev, u8 powerlevel)
 	u8 byte0, byte1, byte2, byte3;
 
 	powerBase0 = powerlevel + priv->TxPowerDiff;	/* OFDM rates */
-	powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
+	powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) | (powerBase0 << 8) | powerBase0;
 	powerBase1 = powerlevel;							/* MCS rates */
-	powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
+	powerBase1 = (powerBase1 << 24) | (powerBase1 << 16) | (powerBase1 << 8) | powerBase1;
 
 	for (index = 0; index < 6; index++) {
-		writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index < 2)?powerBase0:powerBase1);
+		writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index < 2) ? powerBase0 : powerBase1);
 		byte0 = (u8)(writeVal & 0x7f);
-		byte1 = (u8)((writeVal & 0x7f00)>>8);
-		byte2 = (u8)((writeVal & 0x7f0000)>>16);
-		byte3 = (u8)((writeVal & 0x7f000000)>>24);
+		byte1 = (u8)((writeVal & 0x7f00) >> 8);
+		byte2 = (u8)((writeVal & 0x7f0000) >> 16);
+		byte3 = (u8)((writeVal & 0x7f000000) >> 24);
 
 		if (byte0 > 0x24)
 			/* Max power index = 0x24 */
@@ -278,7 +278,7 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev, u8 powerlevel)
 
 		/* for tx power track */
 		if (index == 3) {
-			writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
+			writeVal_tmp = (byte3 << 24) | (byte2 << 16) | (byte1 << 8) | byte0;
 			priv->Pwr_Track = writeVal_tmp;
 		}
 
@@ -288,7 +288,7 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev, u8 powerlevel)
 			 */
 			writeVal = 0x03030303;
 		} else {
-			writeVal = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
+			writeVal = (byte3 << 24) | (byte2 << 16) | (byte1 << 8) | byte0;
 		}
 		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
 	}
-- 
2.17.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel